Question about 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

I can start the vehicle put can't shift into Drive

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Shift interlock is sticking if it is a center coucil auto shifter there should be abypass switch to use with your key to shift it out of park most likle cause is pop or coffee spilled down on shifter plate clean out with soap

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to put into drive to get home heard you could do that from under vehicle I got a 2003 Pontiac Montana


FIRST why are you requesting this style of by-pass -is shift cable broken --not disengaging -- you can put vehicle in drive by disconnecting the transmission select cable but if you do so vehicle should not start in drive and if your by yourself and are trying to do this you really cant

Oct 29, 2016 | Pontiac Cars & Trucks

2 Answers

1997 Carolla- engine dies when shift to reverse or drive, starts again when put in park. Is this a transmission problem or starter/ignition problem?


There is a switch that only only allows you to start the engine in Park or Neutral. It sounds as if yours is faulty or has a bad connection. Finding it will be the problem.

Jun 19, 2017 | 1997 Toyota Corolla

1 Answer

Does the 4 wheel drive shifter need to be in neutral when driven out of 4 wheel drive. when i put it in neutral and put the normal shift gear in drive the vehicle will not move. but when i put the 4wheel...


4 wheel neutral vehicle will not move that for towing or moving around --put in 2wh --4hi or if have 4low transfer case has to be in a setting to move

Aug 29, 2017 | 1998 Toyota 4Runner

1 Answer

I have a F250 lariat with a 460 - truck stalls when I put it in gear - even after it runs for 20 min. Sometimes it will stall while I'm driving. I had carborator replaced last year. Hope you can help.


Some possible causes could be:

Vacuum leaks cause an engine to run lean witch can cause the vehicle to stall when put into gear.

Improper base idle adjustment can cause the vehicle to stall when shifted into drive or reverse

A malfunctioning or damaged carburetor can cause the vehicle to stall when shifted into drive or reverse

Improper ignition timing can cause the vehicle to stall when shifted into drive or reverse.

A malfunctioning or damaged transmission or torque converter can cause the vehicle to stall when shifted into drive or reverse

Oct 31, 2010 | 1987 Ford F 250

3 Answers

I CAN NOT SHIFT THR TRANS INTO NUTRAL SO I CAN TOW IT BEHIND MY MOTOR HOME. IT WILL SHIFT INTO 2H, 4H, 4L


Shifting to NEUTRAL
To shift the transfer case to NEUTRAL, first make sure
the vehicle is parked so that it will not roll:
1. Set the parking brake.
2. Start the vehicle.
3. Connect the vehicle to the towing vehicle.
4. Put the transmission in NEUTRAL (N) or have
the clutch pedal pressed for vehicles with
manual transmission.
5. Shift the transfer case to 2HI.
6. Simultaneously press and hold the 2HI and
4LO buttons for 10 seconds. The red NEUTRAL
light will come on when the transfer case shift to
NEUTRAL is complete.
7. Shift the transmission to REVERSE (R) for one
second, then shift the transmission to DRIVE (D)
for one second or FIRST (1) for vehicles with
manual transmission.
8. Turn the ignition to OFF.
9. Place the transmission shift lever in PARK (P) or
FIRST (1) for vehicles with manual transmission.
10. Release the parking brake prior to towing.

************************

Shifting Out of NEUTRAL
To shift out of NEUTRAL:
1. Set the parking brake and apply the regular
brake pedal.
2. Start the vehicle with the transmission in PARK (P)
or FIRST (1) for vehicles with manual transmission.
3. Press the button for the desired transfer case position
(2HI, 4HI, AUTO 4WD or 4LO).
4. Put the transmission in NEUTRAL (N) or press the
clutch pedal for vehicles with manual transmission.
5. Shift the transmission lever to the desired position.
After the transfer case has shifted out of NEUTRAL,
the red light will go out.
6. A re-engagement sound is normal when shifting out
of NEUTRAL.

Jan 22, 2010 | 2000 GMC Jimmy

2 Answers

The van will not start but without the key on the auto relay is buzzing. the van did start once but cut off. it only started after jamming the shift lever up into the park position.


Sounds like the safety nuetral switch its located on the trans mission and will only allow the vehicle to be started in park or nuetral position but if its gone bad or out of adjustment your vehicle will never start. Look under the hood on the top of the transmission assuming its front wheel drive where the shift linkage attatches to the transmission there will be an electronic part there with a wire connector that should be the one. I f its rear wheel drive then its under the vehicle generally on the drivers side of the tronamission.

Dec 21, 2009 | 1999 Dodge Caravan

2 Answers

UPON STARTING THE VEHICLE, IT WILL NOT SHIFT OUT OF PARK TO DRIVE OR REVERSE


The vehicle is an automatic I would imagine, There is a switch on the brake pedal that is called a brake lamp switch, that is your problem, that switch runs a shift lock, wich will cause your vehicle to not shift.

Nov 20, 2009 | 2005 Chevrolet Impala

1 Answer

How to shift into 4wd


Ford has 2 types of 4x4 system engagement. One is a knob on the dash that you just turn to 4wheel drive high or low. The other system is the 4x4 transfer case shift on the transmission tunnel (hump) between the driver and passenger seats. To shift into 4 wheel drive high while driving, just let off the gas and shift transfer case into 4H position, and continue driving. To shift into 4 wheel drive Low, stop the vehicle completely, put transmission in neutral, shift transfer case into 4Low position, put trans. in gear, and start driving. I am assuming before doing the above, you have locked in ( turned the front hubs to 4 wheel drive position.) Any further questions, let me know.

May 16, 2009 | 2003 Ford F150 Regular Cab

2 Answers

Car will not shift from park to drive


more than likly the linkage has slipped and is not secure properly any more you should have a local tec, take a look at it .

Jan 05, 2009 | 2005 Mercury Sable

2 Answers

99 nissan pathfinder 4 wheel drive once put into 4 wheel drive popping noise underneath the vehicle


that sounds like a bad universal joint on the transfer case to the front axle. have that checked out

Oct 01, 2008 | 1999 Nissan Pathfinder

Not finding what you are looking for?
2007 Chrysler 300c AWD Sedan New Cars Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...