Question about 1992 Ford Crown Victoria

Open Question

A 1992 crown victoria the gear shift is stuck in drive and won't go back into neutrual or reverse or park so i can't start the car

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

j_del
  • 1586 Answers

SOURCE: The gear shift get's stuck

Could be the shifter interlock switch - your car requires that the brake pedal is pressed before it can come out of park. If that switch is not working, the car won't ever know you're pressing the brake, and won't let the car out of park.

Posted on Aug 03, 2008

  • 180 Answers

SOURCE: 1993 FORD CROWN VICTORIA has no reverse gear when engine warm.

No band for reverse,sounds like you have a trans. in need of repair.

Posted on Jan 22, 2009

  • 43 Answers

SOURCE: The manual gear shift will not move to reverse it

Some times you could get them out of park by pounding on the top of the shifter while moving it out of park at the same time. You need a new shifter assembly. If it won't come out of park, they can drag it onto a flatbed.

Posted on Apr 04, 2009

jaysonemanme
  • 500 Answers

SOURCE: 1995 crown vic gear problems/gear shift wont lock

most likely the shift tube bushings are bad- you may have also lost a few screws in the shift tube or they could just be loose. you have to pull the steernig column down to inspect/repair it.

Posted on May 31, 2009

alicantecoli
  • 22114 Answers

SOURCE: transmission won't shift into reverse and ignition

change the stop light switch

Posted on Aug 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 1992 ford crown victoria that doesn't shift into reverse most especially when it's warm. i've had fluid changed. fluid is reddish now. is there an adjustment? sometimes seems like i can mess with...


Fluid color don't matter. Your cable or shifting linkage may have slipped or is slipping. #1 Hold brake pedal down and move shift lever very slow around the reverse indicator. When reverse activates note were indicator is located. #2 Test the other gear indicators at the proper speeds(MPH). No problems with #2-linkage problem. Problem with both-go get a six pack. Good Luck.

Aug 04, 2013 | 1992 Ford Crown Victoria

2 Answers

1989 Ford Crown Victoria wont go into reverse and drives in nuetral???


Sounds like your linkage slipped out of sequence. On your transmission there is a place where you can manually shift your tansmission through the gears. When you move the selector on the trani it should move the shifter as well. All the way up on selector should be park, then R,N,D so on. If you move the selector all the way up at your shifter reads something else, you need to adjust the linkage and put car in park with selector on trani in park and tighten linkage back up. Run through all the gears and you should be good.

90345b2e-83af-476b-ab39-dd6e70c72847.jpg

Apr 14, 2013 | 1989 Ford Crown Victoria

2 Answers

2003 crown victoria won't come out of park


Had a similar problem. Solved it two ways first place key in the 3 position move gear to N then start and it will shift easily. Second solution check brake light fuse, it is probably blown replace it and gears will shift OK.

Jul 01, 2012 | 2003 Ford Crown Victoria

1 Answer

The gear shifter wont go into park , and only started in neutral but now seems to be stripped. this is a 1992 crown victoria v-e


The bolt tens to loosen up on the shifter. Look up from the floor board at the column. You will see the shift cable attached to a metal shift arm. Where this arm is bolted to the column with two bolt, tighten the bolts they should be loose, You will need a torx bit. I think T30 or t40

Feb 13, 2011 | 1992 Ford Crown Victoria

1 Answer

1995 crown vic gear problems/gear shift wont lock


most likely the shift tube bushings are bad- you may have also lost a few screws in the shift tube or they could just be loose. you have to pull the steernig column down to inspect/repair it.

May 30, 2009 | 1995 Ford Crown Victoria

2 Answers

1993 FORD CROWN VICTORIA has no reverse gear when engine warm.


No band for reverse,sounds like you have a trans. in need of repair.

Jan 22, 2009 | 1993 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...