Question about 1993 Mitsubishi Mighty Max

1 Answer

Are all the clutches on the 92 mighty max hydrolic? yhe reason I ask is on the backside my hood there is a diagram of the brake reservoir and right next to it is a reservoir for the clutch. However, on the actual engine there is no clutch reservoir. Is there just regular cable clutches also?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,016 Answers


Not usually these models all had hydraulic master cylinders for the clutch, if there is a master cylinder next to the brake master cylinder then that will be the clutch master cylinder and it will be hydraulic.



Posted on Sep 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i bypass clutch safty switch on 92 mitisbishi mighty max

There should be a switch on the arm of your clutch pedal. If it is a two wire switch, the wires can be cut and twisted together. This is a safety feature and should not be done.

Feb 28, 2015 | 1992 Mitsubishi Mighty Max

1 Answer

Clutch will not disengage

You should have a hydrolic system that is operated with a clutch slave(on the side of the trans) it could be leaking fluid or a clutch master cylinder under the hood next to the firewall. Check the reservoir and see if it is full with brake fluid. If not look to see if the clutch slave or the clutch master cylinder is leaking. Replace and bleed the system just like you would your brakes.

May 29, 2012 | 1997 Geo Prizm

1 Answer

No clutch peddel. will go in gear and pull if eng ine is off. enough peddel to keep car from moving , can not shift.

check that there is fluid in teh clutch reservoir under the hood.

if you pop hte hood on the drivers side (right side) of the engine in the back right corner of the engine bay you will see two fluid reservoirs each wwith a grey cap. the one closer to the front of hte car is the brake fluid, behind it is for the clutch. It should be filled between the min and max lines printed on teh side. you fill the reservoir with dot3 brake fluid. It is important that you don't let any contaminates or water get into the fluid so most people try to use a fresh botle every time they top it off.

after that you really should have yoru ****** fluid changed or at least inspected for proper fill amount.

Jul 12, 2011 | 2003 Honda S2000

1 Answer

My clutch pedal is extremely soft, and has started to stay on the floor. Is there something that I can do to rectify the situation until I can get it to my mechanic? Help!

Honda uses hydrolic clutches. Pop the hood and there should be a reservoir of "clutch fluid" (clutch systems use brake fluid) next to the brake fluid reservoir. It will be marked DOT 3 just fill that up with brake fluid and you'll be good to go.

Sep 10, 2010 | 1994 Honda Accord

1 Answer

Where is clutch for 03 VW Bettle hydrolic reservoir?

hi there i think you will find that the clutch reservoir is the same as the brake one have a look at the brake reservoir for a pipe leading off it to the clutch pedal area.

hope this is of help Regards JR

May 30, 2009 | 1999 Volkswagen Beetle

2 Answers

Under the hood, the reservoirs.

If your vehicle is a stick shift, likely it's the master cylinder for the clutch. stick your finger in there and see if it smells and feels the same as what's in the brake master. If it appears low, check where the clutch rod goes into it in the drivers side of the firewall. If you find some fluid there its leaking. (also check line and slave cylinder that works the clutch) Could also be steering fluid but I've never seen them put that there.

Apr 18, 2009 | Hyundai Accent Cars & Trucks

2 Answers

My 1991 Ford Ranger Clutch Problem.

get someone to push clutch down and check if arm moves.Clutch has nothing to do with the starting of the engine on a vehicle this ancient

Mar 31, 2009 | 1991 Ford Ranger Supercab

2 Answers

Need the valve gap for 1991 mighty max

Does not have adjustable valves . It has hydrolic valve lasher's . they are spring loaded ( i believe ) . I just replaced them in mine . valve giude seal's where worn out causing it to smoke realy bad ( looked like a mosqito truck ) and the valves where ticking , due to the hydrolic valve lash adjuster's being worn out . They are about $ 8 - 10 buck's each at advance .

Mar 22, 2009 | 1991 Mitsubishi Mighty Max

1 Answer

Clutch pedal too hard too push in 94 might max

Bad presure plate. The clutch is made up of two parts, the clutch disk and the presure plate. as the vehicle gets older the pressur plate can bend making it imposible to push the pedal in. This is very common if your vehicle has a clutch cable as compared to a hydrolic clucth but happens with both just the same. The solution is replace the clutch.

Mar 08, 2009 | 1990 Mitsubishi Mighty Max

Not finding what you are looking for?
1993 Mitsubishi Mighty Max Logo

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides