Question about 1994 Ford F150 Styleside Supercab

2 Answers

Check engine light comes on, checked all fluid levels ok.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

There is a plug near the drivers side hood hinge, you will need a tool to retrieve the code. it will be a computer issue, not likely a fluid issue.

Posted on Sep 05, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 172 Answers

Could be MANY different things. Many auto parts stores will read the stored computer code (fault code) for free and give you an idea of what might be wrong.
Most of the time, it is a bad sensor (there are many), and they are generally inexpensive and easy to replace.

Posted on Sep 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY 2005 KIA AMANTI ENGINE LIGHT IS ON AND DOES NOT GO AWAY. i CHECK THE OIL LEVEL AND IS OK. HAD MY TRANSMISSION FLUSHE AND FLUID REPLECED TWO DAYS AGO. aNY iDEAS^ THANKS


THE CHECK ENGINE LIGHT COMES ON WHEN THE COMPUTER DETECTS A PROBLEM. YOU NEED TO HAVE THE CODES READ. THAT GIVES YOU A GOOD PLACE TO START.

Dec 21, 2014 | 2005 Kia Amanti

1 Answer

Red spanner warning light


Brake Light. Make sure you are not driving with hand brake on. Check brake-fluid level. Top off brake fluid if low and make appointment to check brakes. Driving with brake light can be dangerous; deal with this soon. Call tow truck or drive carefully and slowly to shop.
ABS (antilock brake system) Light. Indicates either low brake-fluid level, stuck brake caliper or faulty ABS. Check brake fluid and make appointment to get brakes checked. Call tow truck or drive carefully and slowly to shop.
Oil Light. Either engine is very low on oil or there is no oil pressure. Pull over and turn off engine immediately. Check oil level and add oil if low. Turn engine back on to see if light has gone off. If oil light is still on, bad oil pump (no oil pressure) is likely. Call tow truck.
Check Engine Light. Car's computer senses engine problem. Difference in performance may not be noticeable, but make appointment to have car diagnosed. This usually cost around $65-$75 to do. OK to drive. If problem is serious, computer may switch to limp-home (low-power) mode and you won't have option of waiting to bring car into shop.
Air Bag Light. Get air bags checked. Problem could prevent them from activating in accident. OK to drive, but not safe in accident.
Battery Charge Light. Alternator is not charging. OK to drive, but turn off any unneeded electrical devices (radio, heater, defroster) and avoid starting engine more than necessary. Bring car into shop soon to avoid getting stranded. When alternator is not charging, battery loses charge and car stops working.
Emissions Lights (O2 sensor, EGR, check emissions). Depending on car model, these lights may indicate problem with emissions sensor or may light up at certain mileage, usually 60,000 miles (100,000 km). Get sensors checked. OK to drive. If problem exists, car might get poor gas mileage.
OBD Tools 365 Days Shop

Aug 14, 2014 | Cars & Trucks

1 Answer

I have a warning light that came on today, looks like an engine but is lit solid not flashing, I checked the fuel cap and it is fine, should I stop driving it?


Maybe. did you check the oil, coolant level. automatic transmission fluid? The check engine light will come when your vehicle needs a major service; such as, Now, this an example, OK. Like change coolant, change the automatic transmission fluid, or change differential fluid, or it just needed 3 month, 6 months, 12 months service check up at the dealship. It could tell you even to rotate the tires.

When the check engine light comes on. you vehicle needs some type of preventive maintenance done to this Volkswagen Jetta. You need to get it check out and have them reset the check engine light. GB...stewbison

Sep 09, 2011 | 2005 Volkswagen Jetta

2 Answers

I have a 2002 pontiac grand prix. my e-brake light will stay on when the e-brake is not on.


Check your brake fluid level. Low fluid levels will cause the brake light to come on. If the fluid is not low, there could be a problem with the emergency brake light switch or the brake fluid level sensor.

Sep 03, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

Check engine light comes on and goes off after about 5 minutes of driving. All fluid levels check out fine. Motor will knock if light stays on for any longer than 5 minutes


sdYour fluid levels can be OK and you can still not be getting oil up to the valves, rocker arms and push rods. I would suggest taking the valve covers off and see if oil is lubricating the above. Please let me know if I can be of any further help.

Jun 21, 2010 | 1995 Buick LeSabre

1 Answer

Can't find the fill or check transmission location on 1996 isuzu trooper 3.2 v6 engine. where is it located? no isuzu mechanic in our area


It's check at the transmission pan, there is two drain plugs, the lower one is to drain transmission fluid, the higher one is to check level, with engine running and in park remove up most drain plug if fluid start to come out level is ok, if no fluid coming out will need to add some till it start to come out.

May 27, 2010 | 1996 Isuzu Trooper

1 Answer

How to check transmission fluid on my 2000 Isuzu


Transmission fluid level get's check from the transmission pan. there is two drain plug's on the transmission pan, the lower one is to drain fluid and the up most one on the pan is to check level, with engine running remove the up most plug if transmission fluid start to come out it's ok.

May 21, 2010 | 2000 Isuzu Trooper

2 Answers

Oil level low light comes on. When I turn


some cars with oil level warning light on, it doesn't mean that its only reading the engine oil level is low, sometime the transmission fuid too. Did you check your transmission fluid if it is ok or not? try to check and let us know, ok.

Mar 14, 2010 | 1999 Buick Century

1 Answer

2006 Subaru Outback: all of a sudden, the cruis control kicked off, I had a ''check engine'' light, flashing ''sport'' light and flashing cruise light?? When I arrived home, I checked under the hood...oil...


Hello, whenever the check engine light comes on the cruse light will flash as well, that is normal. The check engine light will not come on if fluid levels are low or if the temp is getting to high, I am pleased to know that you checked all of the fluids, most wouldn't have even the slightest thought to even try checking them. The On Board Diagnostics or OBD-2 for short only sets a check engine light when the ECM or Electronic Control Module reads a sensor value either too high or too low, but it has to read that same fault 3 consecutive times in a row to turn on the check engine light (w/ flashing cruise). Otherwise your check engine light would be going on and off all the time. I would go to your local parts store and have them check the codes for free because a dealer will have to charge you labor for them to check due to the knowledge needed to use the highly sophisticated scan tool they use. That way you can go either to an independent shop or a dealer with what the other scanner says is wrong which cuts down on the cost of repairs. They will probably ask you if you fueled up just before the engine light came on, in which that would be code P0440:EVAP leak(very small leak), that means the fuel tank sensor doesn't like how you put the fuel cap on. Subaru recommends AT LEAST 3 clicks when tightening your fuel cap. But until that code is checked you won't know whats wrong, if nothing went boom or bang you'll probably be ok. If it does end up being a fuel cap leak, then just loosen the cap put it back on and just make 1 full revolution, and just keep driving it. The light will go off within 3 full warm up cool down cycles or (drive cycles). I hope this info helps...(subyguru)...

Feb 23, 2010 | 2006 Subaru Outback

Not finding what you are looking for?
1994 Ford F150 Styleside Supercab Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...