Question about 1998 Acura TL
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yes it would be a very good idea to change them all at once. You can't go wrong there because most timing belts and water pumps go out around 90-100,000 miles. Go for it I would.
Posted on Feb 08, 2010
My sincere apologies for the delayed response.
I have only been a free contributor to this site for the last 4-months.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, however I am answering it either way.
Click on the following direct Link. It has several Diagrams you will need for your Timing Belt replacement. Included are the Cover Bolt Locations, Tool Needed and Marks for your specific engine.
You may also want to Print out these Diagrams for future use.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 17, 2010
Below are the proper steps to removing your vehicle's fuel tank..
Disconnect the negative battery cable.
Relieve the fuel pressure
Remove the rear seat cushion.
Remove the plastic grommet from the floor pan.
Detach the fuel pump electrical harness.
Disconnect the fuel lines from the fuel pump by compressing the tabs on both sides of each nylon push connect fitting and easing the fuel line off of the fuel pump.
Raise and safely support the vehicle securely on jackstands.
Remove the muffler mount.
Remove the heat shields.
Remove the fuel tank cover.
Remove the drain plug and drain the gasoline into a approved container.
Disconnect the fuel lines and remove the fuel filter and base.
Loosen the fuel tank filler pipe clamp at the fuel tank.
Support the fuel tank using a hydraulic jack and a block of wood or other suitable device.
Remove the two fuel tank support strap bolts and position the straps out of the way.
Partially lower the fuel tank to access the fuel tank filler pipe vent tube and disconnect the vent tube and filler pipe from the tank.
Disconnect the fuel vapor tube from the tank.
Lower the tank from the vehicle.
Installation is the reverse of the removal procedure.
Posted on Apr 23, 2010
Tips for a great answer:
Dec 01, 2017 | Acura Cars & Trucks
Mar 19, 2014 | 2004 Acura TL
Mar 15, 2010 | 1998 Acura TL
Nov 04, 2009 | 2004 Acura TL
Sep 16, 2009 | 1997 Acura TL Series
May 30, 2009 | 1998 Acura TL
Mar 12, 2009 | 1998 Acura TL
Dec 02, 2008 | 1998 Acura TL
136 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: