Question about 1995 Oldsmobile Cutlass Ciera

1 Answer

Does anyone know how to change out the A/C compressor to a 1996 cierra?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 4,340 Answers

This job requires special tools and special training. If you lack either, you risk SERIOUS personal injury. Injury comes VERY EASILY!

You need to address oil levels, proper and legal refrigerant recovery, system evacuation, and recharge.

You were planning to also replace the receiver/dryer, correct? It also needs the oil in it measured and incorporated into the amount of oil (in %) that would need to be added. FAILURE to address these and other issues will guarantee premature system failure and likely compressor damage.

Take this job to a qualified shop.

Sorry

Posted on Sep 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to check the oil pressure switch. Does anyone know where it is located on a 94 old cutlass cierra?


Stick your car details onto youtube. there's all sorts of info like this question on there. basically its low down on the right front engine block as you look in.

Nov 14, 2016 | 1994 Oldsmobile Cutlass Ciera

1 Answer

How do you change the a/c compressor on a 96 old aurora?


just changing the compressor, some auto parts stores have videos on this. you will need a vacuum pump and some parts. there is not partial fix on AC. the refrigerant gas is corrosive when it is in contact with water. so, the old lines must be cleaned the dryer must be replaced, the "O" rings must be replaced. the orifice must be replaced. after all the parts are replaced a vacuum pump is put on the system for at least 4 hours. after that, the pump is turned off and the valves are closed and the gage is watched until you are sure there is no leak, then the charge in placed in the system. I forgot, you must also ad the correct "pag oil" if you still what to know how to do this let me know and I will try to find you a link, or you can try Auto Zone

Jul 27, 2014 | 1996 Oldsmobile Aurora

1 Answer

1996 olds cutless cierra sedan stalling and backfiring when it dies it wont restart for hours. just replaced fuel pump


I would check the cam sensor,and it is most likely the crankshaft sensor,that is the problem.

Aug 21, 2010 | 1996 Oldsmobile Cutlass Ciera

1 Answer

I need to install a new radio in my '96 Oldsmobile Cutlass Cierra


http://www.modifiedlife.com/1996-oldsmobile-cutlass-ciera-car-stereo-wire-schematic/

Apr 18, 2010 | 1996 Oldsmobile Cutlass Ciera

1 Answer

AC Bypass Pulley


YOU MAY CHECK NAPA AUTO PARTS THEY HAVE THEM FOR CERTAIN VEHICLES

Mar 17, 2010 | 1996 Dodge Stratus

1 Answer

I have a 1996 olds cierra. Need a torqe spec on front axle. Replacing a wheel bearing. Thanks!


Hello Quiggle.
The axle nut torque is a 107 ft lbs according to the service manual.
Thank you for using FixYa !

Dec 03, 2009 | 1996 Oldsmobile Cutlass Ciera

1 Answer

96 Geo Tracker Belt Removal Problem


it has more than one bolt.
loosen them all.

May 08, 2009 | 1996 Geo Tracker 2 Door

2 Answers

How do I change out headlight bulb on 91 olds cutlass cierra


Behind the headlight, you should see the nylon bulb holder. Turn it counter clockwise, about a 1/4 turn, and it should come out. Pull the old bulb straight out, and replace it with the new one. Don't touch the glass part of the new bulb with bare fingers, or you'll be replacing it again. Use cotton gloves or a paper towel. Put the holder back in the headlight, turn it clockwise until it locks.

Mar 09, 2009 | 1991 Oldsmobile Cutlass Ciera

1 Answer

Difficulty starting


Could be throttle position sensor, idle air control motor, mass air flow meter, egr valve... if it hasn't had a tune up I would recommend it, since its over 12 years old those spark plugs and wires could use changing if it hasn't been done before.

Take it to a shop for diagnostics to be sure. It's hard to fix/diagnose something that is intermittant.

Sep 02, 2008 | 1996 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1995 Oldsmobile Cutlass Ciera Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...