Question about Hummer H2

2 Answers

LIGHT READS ENGINE OIL LIFE 29% what does that mean

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

If the oil life moniter was correctly reset when the last time the oil was changed then as the car is driven and miles and time count up the life of the oil is being counted down as the oil gets dirty and needs to be changed again, 0% and it's time to change the oil and 100% it's just been changed and your good to go. number of cold starts miles of stop and go and not st much highway miles fully warmed up. The easy things like fully warmed up and not under high load are easier on the oil than ideling in stop and go traffic and then even worse many short trips not allowing the engine to fully warmerup these things make the moniter of the oil life count down quicker.

Posted on Sep 05, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Its getting to be time for an oil change. don't wait for 25% oil changes are cheap, engines are expensive

Posted on Sep 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the percentage mean regarding my oil


oil life. 100% means you just changed oil. 0% means the oil is worn. the computer tells you when to change oil based on hours run speed acceleration and engine temp. Id change mine when it says 10% because at 0% the oil is toast. when you change the oil you need to reset the cluster so it reads 100% most lube places do this for you. if not read the manual it tells you how to reset

Mar 15, 2013 | 2007 Chevrolet Tahoe

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

Tip

Buick service light 1991-01


LeSabre,
Park Avenue


2000-01

Turn the ignition to ON. Press the GAUGE INFO button on the driver information center (DIC) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIC until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset. Turn the ignition OFF.



Park Avenue


1997-99

When "OIL LIFE INDEX CHANGE OIL" appears in the Driver Information Center, press and hold the "RESET" button while the oil life index is being displayed. After 5 seconds, the oil life will change to 100%



Le Sabre,
Park Avenue


1995-99
1995-96

When "CHANGE OIL SOON" light is illuminated, access the reset button in the glove box. With the engine off and the ignition switch in the run position, press and hold the button for at least 5 seconds. The light will flash four times and then go out.



Century,
Regal,
Roadmaster


1997-01,
1996-01,
1995-96.

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Fully depress and release the accelerator pedal three times within 5 seconds. The light will flash twice and go out.



Roadmaster


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Le Sabre,
Park Avenue


1992-94,
1991-94

When "CHANGE OIL SOON" light is illuminated, find the hole in the underside of the dash on the passenger side near the door. Insert a blunt instrument into the hole and press the switch. The light will flash four times when the system is reset.











on Dec 07, 2009 | Buick LeSabre Cars & Trucks

1 Answer

Possible ice shows up on dash light, what do I do?


This is normal, all it is saying is that with the outside temp.there may be ice on the roads. this is just a warning message letting you know it may be slippery on the roads. you will see this message go away when the outside temp rises above freezing. hope this is helpful, good day

Jan 04, 2013 | 2009 Chevrolet Cobalt

2 Answers

Oil Light is on need to Reset it. Don't have manaual.


Do you mean the "Oil" light or the "Oil Life System" light?
.
If the oil light is on, you need to stop operating the engine and have it checked to find out why the light is telling you that there is no oil pressure.

If you mean the Oil Life light, Then here are the instructions:

How to Reset the CHANGE ENGINE OIL Message

1. With the ignition key in RUN but the engine off,

fully push and release the accelerator pedal slowly

three times within five seconds.

2. Turn the key to OFF.

If the CHANGE ENGINE OIL message comes

back on, the engine oil life monitor has not reset.
Repeat the procedure.

You can also download a PDF version of your owner's manual for free.
2000 Pontiac Montana Owner's Manual

Feb 19, 2011 | 2000 Pontiac Montana

1 Answer

Car says change engine oil because it has 0% life but I just changed it and reset the the change oil light what can it be


You have not reset it. have oil life on dash, hold reset button in until it reads 100% (5-10 seconds)

Jun 05, 2010 | 1998 Cadillac DeVille

2 Answers

I changed the oil and i need to know how to reset the oil light in the dash


Press the up or down arrow button on your dash,until you get the % oil life message.
Then simply press and hold the reset button until the oil life message reads "100% engine oil life".

Sep 03, 2009 | 2005 Cadillac STS

2 Answers

Change engine oil soon light on, how do I turn it off?


Turn the ignition to ON. Press the GAGE INFO button on the driver information center (DIG) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIG until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset.. Turn the ignition OFF.

Best of luck.
Greg

Jul 04, 2009 | 2003 Buick LeSabre

1 Answer

Service Light


You need to reset you oil life.
Cycle through til your oil life shows up.
hold reset for approx. 10 seconds or untill oil life begins to blink
release reset
press reset again for a few seconds until oil life reads 100 %

Good luck and hope this helps

Apr 08, 2009 | 2007 Honda CR-V

4 Answers

Reset oil life display after oil change?


THIS SHOULD BE IT.
How do I reset the Engine Oil life monitor and how does it work? TO reset To reset the Engine Oil Life monitor do the following:
Reset Oil life in NAV/DIC by (with car running) going to INFO>Oil Life>RESET
Press and HOLD until XXX turns to 100%
How does it work? The oil life monitor is a pretty sophisticated algorithm.

GM "The GM Oil Life System will automatically adjust the oil change interval based on engine characteristics, driving habits and the climate in which the vehicle is operated."

Feb 09, 2009 | 2007 Cadillac CTS 3.6L

Not finding what you are looking for?

Open Questions:

0 Answers

What is wrong with my VIPER 5706v remote start alarm installation? 2002 Hummer H1 How it has been connected. On the alarm harness 6 pin connector Connected pin #1,2,3,5 to corresponding ones on the car changing the polarity of the parking light on the alarm by changing fuse position to the positive position. On the 10 pin connector Connected pin # 2,5,9 together to constant wire on the car Connected pin # 10 to 1st ignition on the car Connected pin # 4 to 2nd ignition on the car Connected pin # 8 to accessory on the car Connected pin # 6 to starter key side Connected pin # 7 to starter car side On the 24 pin connector Connected pin # 13 to ground Connected pin #14 to the factory alarm disarm output. - FACTORY ALARM DISARM OUTPUT. We connected the - FACTORY ALARM DISARM OUTPUT through a relay to the - Factory Alarm Disarm wire. At the same time, using a relay and 2 diodes we have connected the Viper alarm - unlock output to the + door unlock wire and the - factory disarm wire, so the factory disarm wire is pulsed at the same time as the unlock wire. Connected pin # 20 to brake wire on the car Connected either pin 15 negative trigger or pin 18 positive trigger to door trigger out on the car Connected pin #22 via a relay to the wait to start glow plus light wire. The wiring diagram supplied by Direct Wire shows the Hummer H1 2002 with an Orange + wait to start wire, therefore the relay was used to reverse polarity. Connected pin #24 to the factory alarm arm wire. 3 pin connector door locks As the DirectWire wiring diagram shows the 2002 Hummer H1 having reverse polarity door lock system, we have used 2 relays Pin # 1 Pin # 3

Apr 12, 2018 | Hummer Cars & Trucks

Cars & Trucks Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Brandon Johnson
Brandon Johnson

Level 2 Expert

251 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...