Question about 1995 Buick Regal

Open Question

What special torx size to remove rotor and is the back the same has the front?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size socket do I use to remove a front rotor?


You don't need a socket. The rotor is held by a torx flathead screw. I stripped mine and drilled it out. It is not necessary. Remove the brakes and this little screw from the rotor and it will come off. If it won't. you need to watch a you tube video about removing a stuck rotor. It is fairly simple. But hard to explain in words.

Jun 22, 2014 | 2006 Buick Lucerne

1 Answer

What torx size to take front rotors on 2006 gmc truck.


I had a gmc savanna 1500. Front brake torx was a t55. Just used a loaner brake tool kit from advance auto parts.

Aug 13, 2011 | 2006 GMC Savana

1 Answer

What size torx is needed to remove the front brake caliper on a 2005 dodge durango


Hi,
It requires a special size that comes as a socket type from the parts store. I believe is is a TORX 45. But, usually you can fit and allen wrench into the torx hole to remove them. I have used 5/16",3/8",8mm and 9mm allens to do the job on various vehicles and it worked out great.
Hope that helps!...Mike

Jun 25, 2011 | 2005 Dodge Durango

2 Answers

Tool to remove front brake caliper to replace rotor Escape 2005


You need a 7mm socket, which are available at auto parts stores.

Jun 20, 2009 | 2005 Ford Escape

2 Answers

Remove front Brake Rotor


Try opening up the caliper with a flat screwdriver thru the opening in the middle of the housing.pry on the rotor and pull towards you to push the rotor back.That should loosen it up enough for you to get it of the rotor.If that dont work you probably got a stuck caliper and have to release the brake line and do the procedure again. GOOD LUCK

May 09, 2009 | 2000 GMC Sierra 3500

1 Answer

2006 Silverado - remove front rotors


Yes the torx screw must be removed and you are right the other two threaded holes you can use two bolts screw them in there after you remove the torx and it will push the rotor off the hub and the best way to remove the torx is with a impact driver it is like a screw driver you change the bits but you hit the end with a hammer which the tool then twists and removes the srew you can find them at any tool store prolly even autozone... and if you dont use bolts to push the hub off just use a brass hammer and pound off the rotor

Mar 26, 2009 | 2006 Chevrolet Silverado 1500HD

2 Answers

2001 toyota camry front rotors


They just slide off; no special tools necessary.

Dec 28, 2008 | 2001 Toyota Camry Solara

2 Answers

Changing front brakes on 2003 Chevrolet Silverado


it is a torx bit for your caliper bolt.a size t50 if I am thinking right. use a good one as these can be hard to get broke loose.as far as rotors remove cliper slide bracket with an 18mm two bolts and rotor will slip off. might have to tap with a hammer

Dec 10, 2008 | 2003 Ford Escape

2 Answers

1999 nissan quest brake pad replacement


Remove wheel & tire,
remove 2 torx bolts that go from the inside to the outside of the vehicle. They are on the inner side of the brake caliper.
lift the caliper out of the rotor.
remove the brake pads.
To install, you must first squeeze the caliper piston back inot its bore. Do this slowly to prevent damage to the piston. You are forcing excess brake fluid back into the master cylinder reservoir. Slow constant pressure will get the job done. Use a large c clamp or a wooden hammer handel if that's all you have.
Fit the new brake pads in the calipers and slide the assembly back over the rotor.
install the 2 torx bolts, size 40? head I think.
You are done.
If rotors are scored bad, replace them too.

Jun 07, 2008 | 1999 Nissan Quest

Not finding what you are looking for?
1995 Buick Regal Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...