Question about 1993 Cadillac DeVille

1 Answer

Trying to install a turning signal flasher - 1993 Cadillac DeVille

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,608 Answers

The turn signal flasher should be on the drivers side lower dash left of the steering column in the fuse panel.There are 2 plastic tabs that you push together and the fuse panel drops down.You should see the flasher in here.Hope this helps.Good luck.

Posted on Sep 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Toyota Avalon turn signals stopped working


Its either the flasher's, the turn signal lever switch or the hazard switch.
Try pulling one of the flashers out and see if the other system starts working.
Has anyone installed aftermarket electronics or tampered with the wiring in either system? Like an ALARM system? Stereo?

Jul 08, 2013 | Cars & Trucks

1 Answer

Turn signals & Flashers will not work on 2002 Dodge Dakota, replaced Combination Flasher unit, still no turn signal or Flasher


Hi Jeff , do you know how to test electrical circuits using a DVOM - digital volt ohm meter ? How to read an use a wiring diagram to pin point testing points in the turn signal circuits ? Here is a web site for free wiring diagrams http://www.bbbind.com/free_tsb.html .Enter vehicle info year ,make , model an engine size . Under system click on lighting ,then under subsystem click on turn signal lamp , Click the search button then the blue link . Then watch this videos an then test the power and grounds ,inputs to the Combination Flasher !
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts
How to Use Multimeter to Troubleshoot Common Problems
The Trainer 18 Electrical Testing Tips


Jul 03, 2017 | Cars & Trucks

2 Answers

How to change the signal flasher


Models from 98 on use a combination flasher. This flasher is mounted either on the front or on the back of the junction block.
The combination flasher is a smart relay that functions as both the turn signal system and the hazard warning system flasher. It is designed to handle factory-fitted equipment. If aftermarket equipment is added to this circuit (such as trailers with lights), the flasher will automatically try to compensate to keep the flashing rate the same.
  1. The flasher contains sophisticated internal circuitry that cannot be tested with conventional equipment. Substituting a new unit for a suspected defective version is the easiest test.
  2. On air bag-e quipped vehicles, disconnect the battery negative cable(s) and wait two minutes from the air bag capacitor to discharge.
  3. Remove the junction block cover. If the flasher is accessible, grasp and pull the flasher from the fuse panel.
  4. If the flasher is not mounted on the outside of the junction block, remove the steering column cover from the instrument panel. Reach through the opening to access the fuse block on the back of junction block. Pull off the flasher.
  5. Inspect the socket for corrosion or any other signs of a bad contact.
To install:
  1. Install a new flasher in the connector.
  2. Install the fuse panel cover.

zjlimited_225.jpg

Fig. Removing the steering column cover for access to the flasher


zjlimited_226.jpg

Fig. Early style flasher system: dual flashers mounted on junction (fuse) block. The turn signal flasher is the lower of the two; hazard flasher is the higher one

zjlimited_227.jpg

Fig. Combination flasher location (1) on fuse block (2) (later models)


Hope helps (remember to rate and comment this answer).

Dec 14, 2010 | 1999 Dodge Durango

2 Answers

Is there a fuse for the turn signals? hazards works ok but the turn signal only the light comes on.


Should be two flasher relays.Easiest way to find them is to turn flashers on and find where the clicking is coming from. They are usually within a few inches of each other.Once you find them both remove the one for the hazard flashers and install it in place of the one for turn signals.If this corrects your issue you will need to purchase another flasher relay.

Jul 20, 2010 | 1992 Dodge Dakota

1 Answer

Blinkers in a 1987 chevy camaro not working inside or out. what might the problem be?


Have you checked the signal light flasher?
You have one for the hazard flashers and one for the turn signals.
Try the hazard flashers.
If they work....switch that flasher with the signal flasher....(they should be interchangeable).
Follow the clicking sound to find the hazard (working ) flasher.
(It just pulls out )
To find the non working signal light flasher....just look for another flasher under the dash that looks very much like the hazard flasher.
Now try the signal lights again with the different flasher installed....do they work now?

Sep 14, 2009 | 1987 Chevrolet Camaro

1 Answer

Turn signal and 4- way not working


Installed a new turn signal arm

Apr 15, 2009 | 1996 Ford Taurus

1 Answer

1995 F150 the turn signals do not work, but


Look in the fuse panel and the turn signal flasher is the big round most likely yellow or silver in the corner of fuse panel. The emergency flasher is in the back side of fuse panel right directly behind the turn signal flasher.
Remove the emergency flasher and install it in place of the turn signal flasher and see if this corrects the problem and if so get a new flasher. If this does not correct it problem will most likely be the multi-function switch.

Mar 13, 2009 | 1984 Ford F 150

2 Answers

Location of flasher for turn signal


  1. Access the COMBINATION Turn Signal and Hazard INDICATOR FLASHER on the Left-Hand (drivers) side of the instrument panel in the fuse junction panel.
  1. Remove turn signal flasher/hazard indicator flasher by pulling indicator flasher straight out.
  1. To install, align the terminals of the flasher and press into place.
How about a picture--

388df46.gif

Oct 03, 2008 | 1996 Ford Thunderbird LX

2 Answers

Turning signals have stoped flashing.


The hazard flasher is located in the convenience center, under the dash, on the left side kick panel. The turn signal flasher is installed in a clamp attached to the base of the steering column support inside the car.
hope this helps!

Jul 25, 2008 | 1996 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1993 Cadillac DeVille Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...