Question about 2004 Chrysler Sebring

Open Question

Check engine code po562, and p0700 - 2004 Chrysler Sebring

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
kenezz6396
  • 64 Answers

SOURCE: What does the code P0700 mean

this a gerneric code that gose from the transmition computer to the power control mod.

Any time the trans feel a hesitation it will send this code.

I have had two plymouth vans and around 130,000 miles i got hesitation in the speed and throttle.. both cases the throttle position sensor went bad. It will be abiut 45 dollars and it is in a place were any one can replace it.


Posted on Aug 12, 2009

Testimonial: "thanks where is this located exactly and is it something i can fix myself"

Ad
  • 412 Answers

SOURCE: Check Engine Light on, codes P0605 and P0700

P0700 IS A CODE SAYING THAT THERE IS FAULT IN TRANS CONTROLLER..P0605 IS AN INTERNAL ERROR IN TRANS CONTROLLER..ACCORDING TO TEST,TRANS CONTROLLER MUST BE REPLACED

Posted on Feb 16, 2010

  • 880 Answers

SOURCE: P0700 code?

P0700 means a transmission problem.

Posted on Mar 31, 2010

  • 184 Answers

SOURCE: engine code reads P1776 1/2 and P0700 transmission

P0700-This Relates to MIL"Malfunction Indicator Lamp")( Request - Control System for Transmission
unable to locate description for P1776,can you get all systems scanned for codes again as 0700 just indicates that a fault has occurred that has lit the check light and logged at the ECU.
Obviously it will be related to the shift fault,maybe a speed sensor or a dirty fluid fault.
Get back to me with any extra info.

Posted on Apr 10, 2011

snoopyme28
  • 1 Answer

SOURCE: CHECK ENGINE LIGHT IS ON WITH 3 CODES

It is the alternator pull out the old one autozone taste it. Pass the test alt good amp volt gives rong volts when you press gass rpm go up3600 volts droop from 14.7 to 10.5 to lowest 8 because alt cylinder is bad 3 codes 1 overall 2 and3 sands low volt codes to the brain you will. Thanks me

Posted on May 14, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Check engine light came on. Registered codes P1775 and P 0700 X2. What are these numbers and can I fix it myself?


Search Results

P1775 Transmission System MIL Fault - AutoCodes.com

https://www.autocodes.com/p1775.html Repair Information for P1775 code. Learn what does P1775 Transmission System MIL Fault means?
Search Results What the P0700 code means. P0700 is set when the PCM detects a malfunction in the transmission control system. This malfunction causes the vehicle to set a Check Engine Light and trigger a failsafe mode. Once the failsafe mode is set it will remain until the fault is repaired or normal operation is detected.Apr 8, 2016

P0700 OBD-II Trouble Code: Transmission Control System ...

https://www.yourmechanic.com/.../p0700-obd-ii-trouble-code-transmission-control-syste...

obd 11 fault codes Google Search

Jun 28, 2017 | Cars & Trucks

1 Answer

I have a 2005 dodge grand carvan What do the codes p0700 and p0562 mean? and how do i fix it ?


P0700 is generic transmission code, transmission malfunction.. Have it read with a scanner to find the exact code. p0562 is battery voltage is low. Check positive and negative cables for corrosion and good connection. Also check the engine and body grounds. Make sure you have a engine to body strap/ground. They break. This could be the reason you're getting the p0700 code.

Oct 14, 2014 | 2005 Dodge Grand Caravan

1 Answer

Dodge 2002 stratus 2.4liter codes po016 p0700 ,po562,what could these mean & how do you fix


lets start with po562, this is a transmission code with low voltage reading at trans solenoids, for this code test your battery and alternator,
the next code po700, this code is to tell you that there is a transmission code stored in the transmission module, which could be the po700. but sccanning the trans module may be a good idea to check for other codes, i assume at this point you are having transmission problems? as far as these codes i would check all fuses and connectors going to transaxle(transmission). you may have internal problems, as we know these chrysler transmissions are junk but you may have bad connection or bad wire to transaxle controller.
last code po016 this code i would check first, i have worked on a few of these that had po016 which means crank and cam correlation . this means the crank and cam are not aligned meaning worn chain , these 2.7 engine... or cam gear spun. testing this ,you will need to know about car repair or you could damage the engine if it isnt already.

May 08, 2013 | Cars & Trucks

2 Answers

I have a 2011 dodge caliber and it isz throw a c0700 code could u tell me what this is


P0700 DODGE - Transaxle Control System Malfunction

Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transaxle shifting problems

Possible causes - Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module

Tech notes Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem.

P0700 DODGE Description The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.
CLEAR THE CODES AND SEE IF IT RESETS. MOST LIKELY NOT A PROBLEM

Sep 07, 2011 | 2002 Dodge Grand Caravan

1 Answer

What do i need to replace to fix error code p0700 on a 2002 dodge intrepid


(DTC) CODE # P0700....Transmission Control System (MIL Request) Translation: Transmission Control Module (TCM) Malfunction or Failure. P0700 Information Code The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM. This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it.

I hope this helps....let me know if I can assist further !!

Feb 21, 2011 | 2002 Dodge Intrepid

3 Answers

Car does not run ,I check the code ,it is P0700


Because it is not starting, you should replace the Crankshaft sensor (above the oil filter, back of the engine)-it will cause a P0700-I have a 99 SL2, 178,000 miles


DTC) CODE # P0700....Transmission Control System (MIL Request)
Translation: Transmission Control Module (TCM) Malfunction or Failure. P0700 Information Code The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM. This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it. The dealer probably saw the code P0700 and went to the TCM and pulled out the code stored there telling them the Transmission Solenoid Assembly (TSA) is bad. This is a good example of understanding what the codes actually mean. If the manual you looked at said the TCM is bad and to replace the TCM when you see a P0700, then it is wrong.

Jan 24, 2011 | Saturn Ion Cars & Trucks

2 Answers

I have a cherokee sport that is running a few engine codes and i have a code scanner but no book to look the code up... mine are p1281,p0700,p1694


P1281 Engine Is Cold Too Long P1694 No CCD Messages Received From ECM
  • P0700 Transmission Control System Malfunction


    For the P0700 I would check your tps sensor first to make sure it is good. This is a common failure in this vehicle which can sometimes show as a transimission malfunction.


    Hope this helps, if you want alot more info about jeeps goto www.cherokeeforum.com

  • Dec 12, 2010 | 2000 Jeep Cherokee

    1 Answer

    DODGE CARAVAN 2007 AND CODE PO480 + PO562 + PO700 AND FAN COOLING REST OPEN WHEN THE KEYS NOT IN CONTACT THANKS


    I just had the same codes a week ago. P0562 & p0700. Found that they were both related to a battery with a dead cell. The p0562 (low voltage code caused by no good battery) causes the transmission control module (p0700) to not receive the correct voltage and act up when drawing power from the battery due to dashboard, starter, etc. drawing from battery as well, With the keys in the ignition. I changed the battery to a new one. Removing the battery will reset the codes and with the new battery the codes may not re-appear, provided there are no other codes pending that could be causing the p0700 code. Some conditions you may experience are 1) no start 2) clicking from the tcm 3) clicking from the starter 4) the dashboard lighting having a life of its own coming on and off, dimming, etc. note: when this happened to me (all of the above) I tested the battery and it was ok, but the problem existed until the New battery was installed. Still runs good now

    Nov 28, 2010 | 2006 Dodge Caravan

    2 Answers

    P0700 code?


    P0700 is a code that tells u the TCM [transmission Control Module] has requested that the PCM [Powertrain Control Module] turn on the check engine light, u now need to ge the TCM tested for the transmission fault code(s) that were stored when the check engine light was turned on by the TCM through and by the PCM

    Mar 31, 2010 | 2004 Jeep Grand Cherokee

    1 Answer

    Check Engine Light on, codes P0605 and P0700


    P0700 IS A CODE SAYING THAT THERE IS FAULT IN TRANS CONTROLLER..P0605 IS AN INTERNAL ERROR IN TRANS CONTROLLER..ACCORDING TO TEST,TRANS CONTROLLER MUST BE REPLACED

    Feb 15, 2010 | 2002 Dodge Stratus

    Not finding what you are looking for?
    2004 Chrysler Sebring Logo

    Related Topics:

    1,488 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    76070 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8266 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...