Question about 1988 Jaguar XJ6
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
What you need to do is remove the 2 screws on the top bezel from inside the engine bay, then underneath the outer corner of the plastic headlamp surround there is a philips screw, (put your head under neath car near from wheel) loosen the screw, do not remove it, now the headlamp plastic bezel/surround will come free enough so you can get a philips screwdriver in through the middle of the headlamp surround, there is a chrome retaining ring holding the headlamp in place, loosen the 3 philips screws (do not remove) The retaining ring will rotate and you can slide the ring out from the outer edge of the headlamp surround. The headlamp will then come out throught the middle of the surround, disconnect the 3 pin multiplug and reverse process for install.
Posted on Sep 19, 2008
no there is'nt enough pressure underneath to make it leak try tighting up the valve cover bolts or just getting a new gasket about a $6.00 to $10.00 dollar fix depending on where you go
Posted on Dec 02, 2008
all cars of that year use r-134 refrigerant. Follow the ac lines till you run across the service port. The one near the evaporator (front of engine) is the high side; leave that one alone. It usually is marked with a red cap
the low side port is near the firewall, and usualy has a blue cap. The valve for a refill can usuallly will only fit on a low side. When filling the can will get very cold very fast. If the can doesnt start to get cold immediately, remove it you have it on the wrong side. Make sure to remove it immediately, as keeping it on the high side will pump liquid freon into the can causing it to explode.
Posted on Sep 04, 2009
Before 2005 the Blutooth Units in the Jaguars were Analog. Analog phones are no longer available, everything is digital. The only option according to Jaguar USA is to pay $2000.00 for a digital unit. Then any bluetooth enabled phone will work.(Jaguar stated that since the government made the switch, they will not do upgrades at Jaguars expense)
Posted on Jan 07, 2010
Tips for a great answer:
Aug 27, 2011 | 1995 Jaguar Vanden Plas
May 19, 2011 | Jaguar Vanden Plas Cars & Trucks
Feb 15, 2011 | 2000 Jaguar Vanden Plas
Dec 22, 2010 | 1991 Jaguar XJ6
Dec 16, 2010 | 2001 Jaguar Vanden Plas
Nov 13, 2010 | 1995 Jaguar Vanden Plas
Feb 05, 2010 | 1995 Jaguar Vanden Plas
Jan 15, 2010 | 2001 Jaguar Vanden Plas
Dec 15, 2009 | 2005 Jaguar Vanden Plas
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: