Question about 1991 Chevrolet Cavalier

1 Answer

How do u remove door panel on 91 cavalier with crankup window

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 385 Answers

Remove screws around handle. look for others. when they are all removed you pry the panel off. that will damage the one-way plastic snap-in holders that will have to be replaced. they are cheap and available at the dealership if not at your local auto parts store

Posted on Sep 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers window fell into to door. trying to remove door panel and try to figure out what happened. don't want to damage door panel by forcing panel off. 91 cad deville 35,000 miles sitting for long time....


Had exact same problem in '91 Cad. Fleetwood FWD, which is same as '91 Deville except for trim fender skirts. My mechanic said it was a broken window regulator. That part is not available new anymore, unless you can find some NOS. I bought a used regulator from Cadillacs Only for $75, and paid my mechanic for 1.5 hours of his time to r&r. Window now works fine. Not happy that I had this problem; regulator not a great design.

Jan 15, 2011 | 1991 Cadillac DeVille

1 Answer

How do you remove the inside door panel backseat right side of a mercury grand marque 1996


Door Panels REMOVAL & INSTALLATION 1989–91 Vehicles
  1. Disconnect the negative battery cable.
  2. On 1990–91 vehicles, remove the speaker grille.
  3. Remove the retaining screws from the door inside handle cup.
  4. If equipped with armrest courtesy lamps, remove the lens, detach the bulb and wiring assembly from the pull cup and remove the pull cup.
  5. Working through the pull cup opening, disconnect the remote lock rod from the lock knob.
  6. Remove the retaining screw and the remote mirror bezel nut from the power window regulator housing switch plate, if equipped.
  7. Raise the plate to expose the window switch and power door lock switch and disconnect the switches.
  8. Remove the retaining screws from the armrest finish panel.
  9. Remove the retaining screws from the armrest and remove the armrest.
  10. Using a suitable trim pad removal tool, carefully pry the trim panel plastic push pin retainers from the door inner panel. NOTE: Do not use the trim panel to pry the clips from the door inner panel. Replace any bent, damaged or missing push pins.
  11. Disconnect the radio speaker wiring, if equipped.
  12. Remove the trim panel and watershield. To install:
  13. If the door panel is to be replaced, transfer the plastic push pins to the new panel. Make sure that the watershield is positioned correctly to the door sheet metal. Remove the door pull handle from the old panel and transfer to the new one.
  14. Position the door panel loosely to the door belt opening and route the wiring harness through the appropriate access holes in the panel.
  15. Connect the radio speaker, if equipped.
  16. Align the plastic push pins on the door panel to the holes in the door sheet metal and press the pins into place.
  17. Install the armrest and route the window regulator, remote mirror cable and power lock harness through the access hole.
  18. Install the armrest finish panel.
  19. Install the power window regulator switch plate housing to the armrest connecting the power window switch, power door lock switch and remote mirror bezel nut, if equipped, prior to securing the retainer screw.
  20. Connect the lock remote rod to the lock knob retainer boss. NOTE: Make sure that the remote rod is fully seated into the retainer boss, then function manually or with the power switch to ensure smooth operation of the lock knob.
  21. Install the bulb and wiring assembly.
  22. Install the lamp lens, if equipped, and the pull cup.
  23. On 1990–91 vehicles, install the speaker grille.
  24. Connect the negative battery cable. Fig. 1: Front door panel — 1990–91 vehicles 84170064.gif
    Fig. 2: Rear door panel — 1989–91 vehicles 84170065.gif
1992–98 Vehicles
  1. Disconnect the negative battery cable.
  2. If removing the driver's door panel, remove the nut from the outside rearview mirror control switch.
  3. Remove the window regulator switch housing by gently prying up, starting at the front. Fig. 3: Front door panel — 1992–98 vehicles 84170066.gif
    Fig. 4: Rear door panel — 1992–98 vehicles 84170067.gif
    Fig. 5: Remove the window regulator switch housing by gently prying up, starting at the front 89600p08.jpg

  4. Detach all connectors from the switch housing.
  5. Remove the door inside handle cup.
  6. Remove the push pin from the door trim panel upper front extension and remove the screw.
  7. Remove the lower self-tapping screw retaining the door trim panel to the door inner panel. Fig. 6: Detach the switch housing electrical connector and remove the housing 89600p09.jpg
    Fig. 7: Remove the door inside handle cup 89600p01.jpg
    Fig. 8: Remove the screws from the door panel in the front and on the upper extension 89600p02.jpg

  8. On Grand Marquis, pry up the screw covers from the door pull handle and remove the screws and handle.
  9. Lift the door panel upward and snap out the panel. Fig. 9: There are also retaining screws located in the map pocket as well as . . . 89600p03.jpg
    Fig. 10: . . . along the bottom edge of the door panel 89600p04.jpg

  10. Disconnect the necessary wire harnesses and remove the panel. To install:
  11. Connect the wire harnesses to the door panel, as necessary.
  12. Install the door panel by pushing in and down until it snaps into place.
  13. Install all self-tapping screws retaining the door trim panel to the door inner panel.
  14. On Grand Marquis, install the door pull handle, tighten the screws and install the screw covers.
  15. Install the push pin covering screw on the panel upper front extension.
  16. Install the inside door handle cup.
  17. Install the window regulator switch housing and install the nut on the outside rearview mirror control switch, if removed.
  18. Connect the negative battery cable. Fig. 11: Lift the door panel upward and snap out the panel to remove it from the door 89600p05.jpg
    Fig. 12: Rotate the door marker lamp bulb and remove it from the door panel 89600p06.jpg
    Fig. 13: Detach the connectors for the trunklid and fuel door release switches 89600p11.jpg
    Fig. 14: Slide the relay connector off of the door panel and remove the door panel from the vehicle 89600p17.jpg
prev.gif next.gif

Aug 26, 2010 | Mercury Grand Marquis Cars & Trucks

1 Answer

2005 Chevy Cavalier Power Window Motor Fix?


the cheapest way to replace your window motor would be to go to a salvage yard to get the replacement. they are not very hard to install the hardest part of the job is removing the door panel without breaking the clips that hold it in place. just slide a big flathead screwdriver in between the plastic door panel and the metal door frame and twist the screwdriver that way the clips wont break on you.

Mar 09, 2010 | 2005 Chevrolet Cavalier

1 Answer

Replace window motor 96 chevy cavalier


take out the door padding
unscrew the glass from the panel
take the glass support kit out
remove the motor and replace it.
NOTE : MAKE SURE THE WIRE DOESNT TRIP OFF THE PULLY.

Mar 03, 2010 | 1996 Chevrolet Cavalier

2 Answers

The door on my 91 chevy truck will not open from inside or out. How do I get it to open or how do i get the door panel off? Don't say you need to get the door open to get the panel off no $#!/ if i could...


OK ok take it easy.... you do not NEED to get the door open to take the panel off. If it is a silverado with electric windows ect, start taking out screws ect. , and pop the panel off, your latch mech, may just need lube, I recommend BP POWER BLAST, spray it on, also look for any linkage that may have come off, IF your door has a window crank, you will need a special tool to remove the locking clip.

Feb 03, 2010 | 1996 Chevrolet Cavalier

1 Answer

How to replace electric window motor 1985 Chevrolet Cavalier Driver's side


You'll ned to remove the inner trim off the inner door first (handle, any arm rest or such, look low for screws) after removing all trim pieces the inner door panel will need to be removed; start in lower corner pulling straight out, work with the top of the panel last, I expect it is hooked into the upper portion of the door. After removing panel and some plastic sheeting (weather protection) you should have access to the inside of the door where the motor sits.
I hope this may have helped,
Tom

Oct 03, 2009 | 1985 Chevrolet Cavalier

1 Answer

2-door Chevy Cavalier - window fell


there are clips that pull out of holes in door around perimeter of door remove panel, that should give you access 

Sep 20, 2009 | 1994 Chevrolet Cavalier

1 Answer

Remove door pannels and replace window motor


You may have missed a few. There are also clips that will hold the panel in place with the screws out, and can be a pain to pop out.

Jun 05, 2009 | 1994 Chevrolet Cavalier

3 Answers

The rear outside door latch on a 1999 Chevrolet Cavalier was caught in a fence and broken off'' How do Replace it?


remove the inner door panell from their its just disconnection of a rod and a few bolts

Mar 08, 2009 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
1991 Chevrolet Cavalier Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...