Question about 2000 Pontiac Grand Am GT

3 Answers

My flashers and blinkers only work once in a while, and when they don't work if i tap the hazard button i can sometimes get them to work, how do i fix this?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Replace the directional switch assembly. They do have a problem with these

Posted on Sep 04, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replace the hazard switch on the dash. the part is about $20.

Posted on Sep 26, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

I would check the hazard switch. This can upset the turn signsl operation as well

Posted on Sep 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Signal lights only work intermittenly


The blinker relay is getting worn out. It's right behind the hazard lights switch. Pull off the black trim around the radio, hazard, ets, and the relay is write there. Next time the blinkers stop working hit the hazard button or hit the trim just above the hazard lights button. Mines been doing it off and on and I just hit the trim above the hazard button and they start blinking again. Never have time or remember to get a new relay.

Sep 07, 2014 | 2001 Pontiac Grand Am SE

1 Answer

Hazards work, blinker engages sometimes but blinks once and stays on


I assume the bulbs (front and back) are lit on the outsIde of the car when you switch them on? Long time since I dabbled with cars but I believe the hazard and indicators run from different flasher units. I suspect the flasher unit is faulty. If you can find it is is fairly cheap and straight forward to replace.

Nov 06, 2012 | Cars & Trucks

1 Answer

Why dont headlights come on an ford f 250


Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher

you need to replace the blinker flasher unit

it is different from the hazard unit

they cost about 4 bucks

the flasher unit is the big round thing in the fuse panel in the dashboard


Oct 05, 2012 | 1988 Ford F 250

1 Answer

Both blinkers don't work but flashers do


There should be a flasher unit on the fuse box under the dash for the turn signals and another behind the dimmer switch for the hazards.
Sometimes one of the flashers is behind the fuse box in the glove compartment if equipped.
Don't be surprised if the flasher is not the problem. Most of the time the problem is the multi-function switch on the column.
There are stories online about using WD40 to take care of the switch problem.

Sep 12, 2012 | 1996 Ford Taurus

1 Answer

How do you change a "flasher" for the "blinkers


Very easy once you find it. Just pull off the electrical connector, unclip the flasher from its bracket, and the new one in...presto! The flasher will be somewhere under the dash, usually somewhere around the steering column. If you have a flasher for the blinkers and a separate flasher for the hazards, put the hazard lights on, and that flasher will be clicking-change the other one for the blinkers.
Good luck.

May 03, 2012 | Cars & Trucks

1 Answer

Flashers out, module, relay


More than likely to be a flasher relay. If you can locate the relay turn the harzards on and tap the relay with the ennd of a screewdriver. If the hazards start to work for a moment when being hit you know its the relay. If it was a module i would of thourght you would have more electrical problems as modern cars are mutiplexed meaning one module controls lots of different things. hope this helps.

Jun 01, 2009 | 2000 Dodge Stratus

3 Answers

Blinkers and hazards not working on Jeep GC


HI. the flasher is faulty or damaged. replacing this device will fix your issue.

May 27, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Blinkers only work with hazard engaged


you need to replace the flasher unit which is located under the dash on the drivers side. put on the hazard flashers to make locating the unit easier (by sound)

robert

please take a moment to rate this solution

Mar 07, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Blinkers and Hazards Stopped working


Signal flasher in fuse panel black and square the one on the right is signal

Jan 26, 2009 | 1998 Dodge Neon

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...