Question about 1989 Chevrolet Corsica

1 Answer

Need location of engine block plug on 95 corsica

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 8,841 Answers

If you are referring to the freeze plugs, there are many. If you have a coolant leak, what you need to do is locate the one that is leaking. Then you'll need to remove and replace it. You may need to remove other engine accessories to access the plug. Also, all of your coolant up to the lavel will leak out when you remove the old plug, so be prepared with a catch pan. These plugs are different sizes, but the parts store can identify which size you need if you bring in the old one.

Posted on Sep 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of the crankshaft sensor on a 1994 Chevy Corsica 3100 engine .


Crankshaft sensors are usually located near the lowest pulley the timing belt goes round. Actual position depends on the manufacturer and model. It will be a small, black, wired plastic block bolted to the engine behind the timing belt.

Dec 25, 2017 | Cars & Trucks

1 Answer

How to tune up 96 chevy corsica


You will need a 3/8" drive ratchet with a 5/8" spark plug socket. There is no distributor on these engines so you won't require a dist. cap. You will want to change spark plugs, ignition wires, air filter, fuel filter and pcv valve. There are no other adjustments.

Sep 14, 2012 | 1996 Chevrolet Corsica

1 Answer

I need location of the freeze plugs on a 95 chevey astro van 4..3


There are three on each side of the block and three on the back, between the engine and transmission. The ones you can't see on the sides are hidden by the engine mounts.

Aug 14, 2011 | 1995 Chevrolet Astro

1 Answer

How many quarts of oil do i need to put in my corsica 95


when changing the oil and filter put 4 quarts in a 4 cylinder engine and 4 1/2 quarts in a 6 cylinder engine. start the engine, check for leaks, turn engine off wait 30 seconds and check oil level to make sure it is on the full mark of the engine oil dipstick.

Aug 10, 2011 | 1995 Chevrolet Corsica

2 Answers

I need to replace my 95 chevy corsica transmission do i have to take out the engine


the trans is removed through the bottom with the engine left in

Jul 27, 2011 | 1995 Chevrolet Corsica

1 Answer

Where is the crankshaft position sensor located on a1991 chevy corsica 2.2 engine


The sensor is located Under hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block. It has the small elec. connecting plug.

May 03, 2010 | 1991 Chevrolet Corsica

1 Answer

K&w engine block sealer


I would suspect at first that this will not work for this problem. On the other hand what do you have to loose by trying it? I have never once got it to work regardless of the manufacturer that I have used.

Considering the price is cheaper to try the block sealer I would at least give it a try with low expectations. Who knows - you could get lucky.

Should it not work yours is and easy one to do a head gasket on. The right fix is a head gasket and inspection of the leaking cylinder wall to make sure there is not a crack in the cylinder wall is really the right fix.

Feb 14, 2010 | 1996 Chevrolet Corsica

1 Answer

1994 chevy corsica would'nt start?


CHECK THE PLUGS SEE IF THEY HAVE GAS (WET) AFTER YOU CRANK THE MOTOR, THEN TAKE OFF THE HT LEAD TO PLUG AND HOLD NEAR METAL PART OF BLOCK, (INSULATED PLIERS TO 50,000 VOLTS OR IT WILL HURT) CRANK THE ENGINE SEE IF THE SPARK IS THERE, MOST START PROBS ARE ELECTRICS, IF YOU HAVE ALL OF THESE REPLACE THE PLUGS

Feb 02, 2009 | 1994 Chevrolet Corsica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...