Question about Ford Taurus

1 Answer

Where is the pcv valve located in a 1998 ford taurus

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

The PCV valve is located on top of the valve cover, on the front of the engine. There will be a rubber hose connected to it about as big around as your thumb. It is really easy to change, just pull the old one straight up and it will come out. Just remove the rubber hose, attach the hose to your new PCV valve, and push it back into the hole. Hope this helps!

Posted on Sep 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 ford Taurus and it backfires and


you might need a tune up but also check the pcv valve and its upper u-shaped hose directly under the throttle body.

Oct 21, 2014 | 1998 Ford Taurus

1 Answer

Where is pvc hose located on 1998 taurus


Look up pcv valve and locate the hose and valve from there, good luck and god bless

Aug 20, 2014 | 1998 Ford Taurus

1 Answer

Pcv location ford escape 2010 2.5 gas engine


The PCV valve is located under the intake manifold on the non-hybrid 2.5L engine. The intake manifold MUST be removed in order to service the PCV valve.
The PCV valve sits in the crankcase vent oil separator.

May 16, 2014 | 2004 Ford Taurus

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

1 Answer

Where is the pcv located on 1998 6cy


Hello! Here is a diagram of PCV location and access/change procedure...Guru...Saailer

e6bdf77.gif




Remove the air cleaner housing to intake/throttle housing. Remove the shield over the throttle springs. Disconnect the cruise control and accelerator cables. Remove the throttle cable mounting bracket, push wiring harness out of your way. Disconnect the PCV hose at the intake manifold and remove the PCV valve.

Oct 18, 2010 | 1998 Ford Taurus

1 Answer

Where is pcv valve located on 2005 taurus


It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.

Jan 27, 2010 | 2004 Ford Taurus

1 Answer

2004 ford taurus


You're pcv valve (positive crankcase ventilation valve) is located in the end of the cam cover it will have a hose connecting it to the intake manifold.

Sep 14, 2008 | 2004 Ford Taurus

2 Answers

PCV valve location


if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.

Sep 05, 2008 | 2002 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...