Question about Mercury Topaz

1 Answer

I need free installation instructions for a 1992 mercury topaz 4 cylinder on how to install a serpentine belt

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,059 Answers

This link show how to change the belt. Scroll down to find yours.
http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528005d41a

Posted on Sep 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace a water pump on a 1992 mercury topaz 4 cylander


For water pump replacement i suggest you to check the help link provided below.

click the link below :----

Water pump replacing procedure for all vehicles?

http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
---------

HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------
How to route Water Pump Belt for 1992 Oldsmobile ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

---------
How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

---------
How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

-------
Where is Water Pump located ?

http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

-----------

This will help. Thanks.

Feb 04, 2012 | 1992 Mercury Topaz

1 Answer

Firing order for a 89 topaz


For the 1989 Mercury Topaz 2.3L In-Line 4-Cylinder:

Firing Order:
1-3-4-2
Cylinders:
........(back).........
|...1...2...3...4...|
........(front)
Distributor:
....(back)
(+)...4
...............2
3
........1...(+)-screw
....(front)

Let me know if this helped...

May 12, 2010 | 1989 Mercury Topaz

1 Answer

Diagram for 92 acclaim serpentine belt


For the 1992 Plymouth Acclaim:
Click on the following free, direct Link. It has several Seprentine Belt Diagrams, including one to match your specific 1992 Plymouth Acclaim with the unspecified Engine: 2.5L SOHC In-Line 4-Cylinder or 3.0L SOHC V6; and the unspecified Engine Options (AC/No AC ect.)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1992/make/plymouth/model/acclaim/1992_plymouth_acclaim_drive_belt_routing_diagram.htm

Apr 17, 2010 | 1992 Plymouth Acclaim

1 Answer

Replace serpentine belt on 1992 dodge grand


Click on the following free direct Link.
It has the correct Belt Diagrams for your 1992 Dodge Grand Caravan wirh either the 3.0L SOHC V6 or the 3.3L V6.

http://www.2carpros.com/car_repair_information/year/1992/make/dodge/model/grand_caravan/1992_dodge_grand_caravan_drive_belt_routing_diagram.htm


Included on the Diagrams are the Instructions on "Rotating" the Automatic Tensioner. See Below for additional Instructions to make your job easier.

"HOW TO": I professionally prefer the Serpentine Tensioner Tool.
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s).
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (located on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening located on the Tensioner Arm) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Before You GO:
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 11, 2010 | 1992 Dodge Grand Caravan

1 Answer

Firing order for a 89 topaz


Mercury Topaz Answer 4 cylinder 1-3-4-2 6 cylinder 1-4-2-5-3-6 Taken from page 1-2 of Haynes Repair Manual for 84-94 Topaz & Tempo
Good Luck!!

Mar 21, 2010 | 1989 Mercury Topaz

1 Answer

How to replace the drive belt in a mercury grand marquis 1989


Posted by Asker under the 1992 Mercury Grand Marquis for a 1989 model.

Sorry for the delayed response....
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but am answering it in case you do.


I also do not know if you have the 5.0L or 5.8L Engine or what options (AC/No AC, etc.).

Click on the following free, direct Link. It has the Serpentine/Drive Belt Diagrams for the 1989 Mercury Grand Marquis for both the 5.0L and 5.8L Engines and engine options (AC/No AC, etc.).

http://www.2carpros.com/car_repair_information/year/1989/make/mercury/model/grand_marquis/1989_mercury_grand_marquis_drive_belt_routing_diagram.htm

"HOW TO":
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner.
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!


Oct 24, 2009 | 1992 Mercury Grand Marquis

1 Answer

Mercury Topaz serpentine belt diagram


I have a 93 topaz, the diagram label is under
the hood itself.

Jul 16, 2009 | 1993 Mercury Topaz

1 Answer

Oil leaking in front of my engine above the oil filter. '92 mercury topaz GS, 2.3 4 cyl


possibly the oil pressure sending unit- looks like a small spark plug screwed into the engine with one wire going to it

May 30, 2009 | 1992 Mercury Topaz

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...