Question about Mitsubishi Cordia

1 Answer

I have fitted a sirius 2l 12 valve sohc engine to my Cordia but it does not run too well. I have the ECU which came with the engine but can not find a pinout/wiring diagram for it. Can you help?

Posted by on

  • Peter Nelson Sep 04, 2010

    I was not specific enough. The engine i bought had some of the plugs but others had been chopped off. Without a pinout diagram, I don't know what wires go to which component {boost sensor, knock sensor, etc. I don't even know if the sirius system even had a knock sensor.} I am guessing that the sirius loom had many of the same plugs as the cordia but I can't be sure.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 5,763 Answers

You should use that computer that came with the engine ,but why a wiring diagram it should plug right in, the engine should of come with the wiring harness and computer should plug in,

Posted on Sep 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chrysler Sebring 2001 3.0 v 6 sohc interference motor or non interference I've seen answers that it was and then it wasn't


Chrysler
  • 1.4L, 1.5L & 1.6L Interference
  • 1.7L Non-Interference
  • 1.8L Interference
  • 2.0L DOHC Interference
  • 2.0L SOHC Interference
  • 2.2L DOHC Interference
  • 2.2L SOHC Non-Interference
  • 2.22L SOHC Interference
  • 2.3L Diesel Interference
  • 2.4L DOHC Non-Interference (Valves may hit if camshafts turn out of time)
  • 2.4L SOHC Interference
  • 2.5L 4 Cyl. Non-Interference
  • 2.5L V6 Interference
  • 3.0L SOHC 12 Valve Engine Non-Interference
  • 3.0L DOHC Interference
  • 3.0L SOHC 24 Valve Engine Interference
  • 3.2L Interference
  • 3.5L Interference
  • 4.0L Interference
  • this should be what your looking for.

Dec 10, 2015 | Chrysler Cars & Trucks

1 Answer

Will a 2007 mondeo 2L dtci engine fit in a 2007 transit 2.2 tdci if I use the mondeo ecu ?


It will, but you need all the computers out of the transit. ECU,BCM,Radio,Security, ignition switch and key, then you need to make sure the wiring is the same...

Oct 23, 2015 | Cars & Trucks

1 Answer

Broak timing chane


you drove car , with it screaming like that. really?
big error that?
if engine (type not stated) is interference engine , they grenade.
that means you bend over the head valves, at least.
post engine full spec


quote: which engine, cant help not knowing the ENGINE !
generation 5 is:
  • 1988-1995: 1.8 L (1,812 cc) 2Y-U I4, 58 kW (79 PS; 78 hp) at 5,000rpm 140 N·m (100 lb·ft) at 3,200rpm
2Y I4, 61 kW (83 PS; 82 hp) at 4,800rpm 140 N·m (100 lb·ft) at 2,800rpm (export markets)[11]
  • 1989-1995: 2.4 L (2,366 cc) 22R-E SOHC EFI I4, 84 kW (114 PS; 113 hp) at 4,600 rpm and 192 N·m (142 lb·ft) at 3,400 rpm
  • 1989-1995: 3.0 L (2,958 cc) 3VZ-E V6, 112 kW (152 PS; 150 hp) at 4,800 rpm
  • 1989-1997: 2.4 L (2,446 cc) 2L diesel I4, 61 kW (83 PS; 82 hp) at 4,200 rpm and 165 N·m (122 lb·ft) at 2,400 rpm[12]
  • 2.8 L (2,779 cc) 3L diesel I4, 67 kW (91 PS; 90 hp) at 4,000 rpm and 188 N·m (139 lb·ft) at 2,400 rpm

Jan 20, 2014 | 1991 Toyota Pickup

1 Answer

What engines will fit 1996 geo tracker 1.6l sohc


if you go to the 2.0 you will need to replace the wire harness ans ecu

Dec 20, 2012 | Cars & Trucks

1 Answer

We are building a race car for dirt circiut and fitting a 1.8L turbo cordia engine to it we are chasing a wiring diagram for the engine to assist..any suggestions where I could get this


repair mannual book or ask your NAPA dealer to print it off for you. Good luck
Let me know how it go's i run the dirt track's in arkansas and oklahoma.

Mar 23, 2011 | Mitsubishi Cordia Cars & Trucks

2 Answers

What other engine will fit a 97 civic ex?


The 96-98 Civic EX came with an OBD2A D16Y8 engine. That is the only engine that will go in as a direct replacement with your current engine ECU. It's an SOHC VTEC engine that has two extra connections not found on the other 96-98 Civic engines - a VTEC solenoid and a special oil sensor used to determine if VTEC engagement is possible. If you swap in an older Civic engine (92-95 generation) you'll have to convert the car to OBD1 (requires a special adapter hardness) and run the ECU that goes with whatever engine you use. This will break functionality of your OBD2 diagnostics port, and depending on which state you live in will cause you to fail emissions checks. If you install a D16Y8 engine from a 99-00 Civic EX, you will have to swap the intake and exhaust manifolds from your old engine to the new engine, and you will be able to continue to run your existing OBD2A wiring and ECU. The 99-00 Civic EX engines have additional sensors, since those engines are OBD2B. The easiest fix would be to find a SOHC VTEC D16Y8 from a 96-98 Civic EX, as it would be a direct plug and play replacement.

Apr 16, 2010 | 1997 Honda Civic

1 Answer

New radiator for 96 plym neon is too large. old one was much smaller. 2L SOHC 16 valve engine, no AC, what gives? Are there 2 diff engines for 96 neon?


Yes there is 2 different engine, 2.0L SOHC, and 2.0L DOHC, but autoparts stores show a few different sizes available, with AC, and without, as well as cooling fan mounts location. Better take lots of measurements and head back to parts store. That's one good reason for taking old part in with you, when at all possible.

Dec 03, 2009 | 1996 Plymouth Neon

1 Answer

My cordia turbo keeps blowing the dip stic out and blows smoke


There is a valve in the top of the Valve cover with a hose that runs to your air filter. PVC valve....... It tends to get clogged. Check/Replace

Jul 07, 2009 | 1988 Mitsubishi Cordia

1 Answer

1993 Geo Storm |Transmission


There is no way they would leave you stuck with the engine!! However, the odds are that it should fit. First check the flywheel or flex plate. [Not sure if its a auto or manual.] If they bolt on, your are into installing the engine! Good Luck with it! Frankster016

Oct 22, 2008 | 1993 Geo Storm

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...