Question about Chevrolet Blazer

Open Question

700r transmission diagram - Blazer Chevrolet Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

700r transmission

Check for a bad CV shaft

Mar 10, 2014 | Cars & Trucks

1 Answer

GMC K1500 700r Transmission started making a wrrrrring sound like a power steering pump low on fluid is still working fine but am concerned

Remove the transmission sump and check for metal in the bottom and the filter. Run pressure test on the transmission to check for pump/ bearing failures

Sep 28, 2013 | GMC Sierra 1500 Cars & Trucks

1 Answer

I'am rebuilding a 700r from a chevy silverado 1985 with the 305. I need to full schematic and diagrams . Can you help me find them pls

Check out They list 2 different manuals that will help. If you are just doing minor repairs and a tune up on your transmission then the Motor manual should do the trick. If you are planning on doing a complete overhaul then you need the GM service manual. It will give you everything you need to know and how to do it so you end up with a working transmission. Hope this helps.

May 02, 2011 | Chevrolet Silverado Cars & Trucks

1 Answer

How much to buy a new transmission and engine??

You do not say which engine trans you have or are wanting. The 3.1 or 3.4 crate engine new will cost about $1,886.00. The 700r transmission will cost about $1499.00. Then the 350 crate engine will cost about $1695.00 up. Plus shipping.

Jan 27, 2011 | 1994 Chevrolet Camaro

2 Answers

Is a 1986 chevy 400 transmission tale shaft the same as a 1986 chevy 700 transmission

If you mean length, not necessarily. You'll have to measure from where the tail shaft bolts to the main transmission case. If you mean the T400 driveshaft sliding into the 700R4, then it shouldn't be a problem. Hope this helps.

Sep 26, 2010 | 1983 Chevrolet Silverado

1 Answer

83 K5 Blazer 6.2 diesel/700R trans lost 2nd and 3rd gear, no clutch slip,then 4th gear lost. I think it's the wiring going to the trans that supplies voltage to internal selnoids.Need supply voltage...

change the shift seloids tell them at the part house to give you the shift seloids boyh they are 24 25 bucks dont let them tell you different we buy them all day in florida from advance auto parts

Jan 29, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

Exchange tail shafts on chevy 700r transmission .need to swap out tail shafts so i will have the same distance for drive shaft

In order to change the length of the shaft coming out of the rear of the transmission you would have to disassemble the transmission and install the correct length output shaft.

Oct 14, 2009 | Chevrolet Caprice Classic Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides