Question about Ford F-250

2 Answers

Where can I find a parts diagram for a 2004 Ford F250 hand brake lever mechanism?

Posted by on

  • Peter Kelly Sep 04, 2010

    Who or what is Auto Zone?

  • Peter Kelly Sep 04, 2010

    The Truck broke a hand brake cable.The truck was taken to the dealer here in Australia and they fitted the new cable. They said that that something had gone wrong in the ratchet mechanism of the lever and they wanted $2000 for the new lever. It would take 4 weeks ex USA to get here.
    All we found was a broken 4mm steel pin about 12mm long lying on the floor.
    If I could find out where the pin was from, I could get a new one machined up quicker and cheaper than that.



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! You may want to check the bookstores or auto parts stores for a HAYNES or CHILLTONS repair manual. Get a copy for your car and will surely help. Hope this helps and thank you for using FixYa!

Posted on Sep 04, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, am pretty sure you cannot find this online, but you can try your luck by visiting any Auto zone store around you to see if they have the diagram.

Posted on Sep 04, 2010



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hand brake doesn't work

The parking/emergency brake is always mechanical no matter what vehicle you have. The cables usually become rusted and no longer move. So, yes, you'll have to replace some if not all the cables. Usually that's enough to fix the problem as the rear brakes hydraulically are probably working fine. (Normal pedal brake use)

Here is a diagram for an 2007, it seems to only have 2 cables. Your lever to the brake cables is probably fine.

Car Parts Diagram

Sep 19, 2016 | 2005 Honda Accord Sedan

1 Answer

How can i get a copy of a fuse box diagram with descriptions for a 2004 ford f250 6.0 diesel super duty?

here is a link to an f250 wiring diagram "PDF".... this site is a great resource for Ford trucks.... download the pdf file and you will have your answer....
hope this helps...

Aug 26, 2014 | 2004 Ford F250

1 Answer

2004 Ford F250 fuse diagram

Need to know what engine you have? But here is a diagram for a diesel just in case you do have a 6.0L.

Mar 31, 2012 | 2004 Ford F250

1 Answer

My cable to my emergency brake snapped off right at the handle, i cant grab any of the cable to release the brake. how difficult is this to repair , or is their a way to release the brake.

I assume it is a foor brake and not a hand brake???
If so, put your head under the dash and look at the brake mechanism. You should see a lever where the cable from the handle went to. Being extremely careful, you can move that lever by hand. Just watch out for the pedal and the brake mechanism that will snap back when its released.

Sep 11, 2011 | Ford Taurus Cars & Trucks

1 Answer

I need a serpentine belt routing diagram for my 2004 Ford F250 6.0 diesel. Where can I get one?

my 2002 f-350 had a sticker under the hood with the belt diagram,yours might have one under there?

Sep 24, 2010 | 2004 Ford F250

1 Answer

Replace emergency brake lever. In a 2008 ford focus

I have the same damned thing and it made the car fail an inspection. The brake works fine, it's just the cheap plastic button that disengages the ratchet that holds the lever broke.
It's like a rally car now (the lack of a lock makes hand brake skids easier).
I haven't found any solutions online, other than replacing the plastic handle and button as one assembly ... but what if something is broken inside?

Jan 26, 2010 | 2008 Ford Focus SE Sedan

1 Answer

On the 2004 ford f-150 talking about the handbrake not parking brake right? if i do, do i take it all the way in like a normal one with a c-clamp?

lets say the parking brake and handbrake are same operated by a mechanical lever or foot lever, ok. if the piston is threaded it has to be spun or threaded back in at the same time pressure is applied pushing it in, you may get away with doing it by hand with a pair of needle nose pliers spinning in and pushing at the same time, also you have have some success using a c clamp while sinning the piston in. keep in mind make sure the caliper has an integral handbrake/ park brake, cable is attached to caliper. hope this helps

Jan 26, 2010 | 2004 Ford F150

1 Answer

The trailer electric brake controller does not work

i have a 2008 ford f250. when i pull my travel trailer the instrument gauge says trailer disconnected and it also says trailer wiring malfunction. then my trailer brake systems turns red and blinks. i took my ford to the dealer they said the truck is fine it is the trailer. than I took my trailer in to get looked at they said the trailer is ok and that 2008 fords have problems with the stock electric brake system what do i do

Jun 11, 2009 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Rear disc brakes

Raise the rear of the truck off the ground using jacks. Support the vehicle on both sides with jack stands to prevent it from tipping over. 
Loosen the lug nuts on the wheels and remove the wheels assembly and set aside, face up, to prevent damage.
Disconnect the caliper bolts and remove the brake caliper. Use mechanic's wire to fasten the caliper to your truck's side rail. Take out the outer disc brake pads followed by the inner pads.
Compress the brake piston into the caliper bore using a C-clamp. Replace the inner brake pads followed by the outer brake pads. Remove the C-clamp.
Remove the mechanic's wire from the caliper. Lay the caliper over the pads, fasten it down and tighten the caliper bolts with the torque wrench to 26 ft. lb.
Replace the wheels and lower the vehicle to the ground. Bleed the brakes if necessary and check the brake performance during a short test drive.
Good luck and hope this helps.

May 05, 2009 | 2004 Ford F250

1 Answer

1996 ford f250 4 wheel drive truck

Item Part Number Description 1 N800794-S60 Bolt, M16-2.0 x 50 2 N601797-S2 Bolt, Caliper Mount M12-1.75 x 30 3 2C150 Pin Assembly 4 2C357 Disc Brake Caliper 5 1175 Seal 6 3423 Bearing 7 3105 Front Wheel Spindle 8 4221 Differential Bearing 9 4222 Differential Bearing Cup 10 1190 Wheel Seal 11 1102 Front Disc Brake Hub and Rotor 12 1102 Front Disc Brake Hub and Rotor 13 1197 Locknut 14 1B198 Lockwasher 15 1C245 Thrust Washer 16 35704 Dana Nut 17 2K004 Front Disc Brake Rotor Shield 18 2B292 Anchor Bracket 19 3130,
3131 Steering Knuckle9572fc0.gif

Jun 11, 2008 | 1996 Ford F250 Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides