Question about 2006 Nissan Sentra

1 Answer

Stop lights do not work when brakes are applied on a Nizzan Sentra 2006. fuse is good. Both brake lights do not work.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

If bulbs are good disconnect the stop light switch mounted on the brake pedal. Jump the connectors and see if the lights come on. If yes, bad switch. If no, check for power and ground at each wire.

Posted on Sep 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no brake lights but all the other lights work


Test sall the fuses first with a test light ands then test for power coming into the brake light switch all the time and back out on the other wire when the brake is applied

Aug 21, 2013 | 1996 Nissan Sentra

1 Answer

Brake lights do not work.


Are the brake lights the ONLY lights that do not work? Does the third (high mount) brake light work when you apply the brake pedal?
The Hummer H3 is basically a Chevy Trailblazer in Hummer clothing.. so the first place to look is the brake light fuse. If it is good, then check for power at the brake light switch mounted near the top of the brake pedal pivot area. Also be sure that the bulbs themselves are OK.

Jul 11, 2013 | 2006 Hummer H3

1 Answer

Brake lights don't work on 95 crown victoria


Battery power is applied through 15A fuse 1 in the I/P fuse panel. It passes through the brake on/off switch and is routed through the multi-function switch to the stop lamps. When the brake on/off switch is closed, the stop lamps light. Possible failures include the fuse, the brake on/off switch, the multi-function switch, and the filaments of the multi-purpose rear lights.

Sep 08, 2012 | 1995 Ford Crown Victoria

2 Answers

My brake lights on my nissan sentra 2006, dont work, fuses are good and bulbs are good, how do I remove my brake light sensor behind the brake pedal?


look to find how its fastened in place and what electrical connectors are hooked up to it and how they are fastened to the switch.disconnect the wire connector first noting how you removed it.then disconnect the switch from its mounting again noting how and what you did to remove it then re-install the new one in reverse order.this is all a tech does to do the same job.

Apr 29, 2011 | 2006 Nissan Sentra

1 Answer

My brake lights wont work on my 2006 nissan sentra.. i replaced the bulbs and the fuse and they still wont work..


might be the brake lite switch way up on the pedal.otherwise it could be the turn signal switch?

Dec 21, 2010 | 2006 Nissan Sentra

1 Answer

Brake light dont work. 2006 chevy truck, 4.8L 2wd


Some of these had two fuses for brake lights. One for the top/center stop lamp and another for the rear left and right brake lights. Usually one said "stop" and the other said "brake" and one was in the underhood panel while the other was in the dash fuse panel. It's not uncommon to blow a brake light fuse [LR and RR] if you tow a trailer but some of these had seperate fuses for the trailer lights also. If you have a test light check both sides of the two fuses for power [ignition key on] while stepping on the brakes. It should at lest narrow your search a bit.

Jun 08, 2010 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

Brake lights will not work.


check all your fuses if fuses are good check brake lite bulbs see if they are blown. if bulbs are good get a test lite see if you have power to the bulb sockets have friend apply brake pedal you test power going into bulb socket if you have no power brake lite switch behind brake pedal could be burnt out. p.s dont forget to check all fese relays when checking your fuses.

Apr 26, 2010 | 2006 Chevrolet Colorado

1 Answer

All 3 brake lights on my 2006 nissan sentra went


WD40 is nonconducting so it can't hurt. Also check the wires at the lights for corrosion.

Apr 14, 2017 | 2006 Nissan Sentra

2 Answers

Brake lights not working


RockAuto has brake light switches for your car ranging in price from $14 to $30. 2006 NISSAN SENTRA 1 8L L4 Brake Light Switch RockAuto

Jun 07, 2017 | 2006 Nissan Sentra

1 Answer

Brake lights not working when you apply brakes


check the brake light switch.
It's usually up under the dash, and it activated by the brake pedal.

There are 2 wires going to it. To test it, jumper across the leads.
or, watch the "action" sometimes you just need to reposition the switch to get it to work.

Aug 07, 2008 | 2004 Nissan Sentra

Not finding what you are looking for?
2006 Nissan Sentra Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...