Question about Chrysler Concorde

1 Answer

2002 Chrysler Concorde LX. High pitched noise from brake area. Somtimes occurs when brakes are applied gently. It also happens when the brakes are released. Sometimes it can be heard without the brakes being applied. I think the noise is from the drivers side brake. I have had the pads changed and the rotors turned to see if it would solve the problem. It did not help.

Posted by on

  • aktasman Sep 13, 2010

    I will try the suggested fix for the brake noise.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

The most common cause for this type of condition is when the caliper and backing surface of the pads are properly lubricated to prevent squeal, the procedure is as follows;

Lubricate both the caliper mating surface and the machined abutment surfaces with multi-purpose lubricant.

Before brake pad installation, be sure to lightly coat the outer backing plate surface of the new brake pads with a disc brake pad anti-squeal lubricant, usually a gel-like material that deadens any high-frequency vibration that can be the source of disc brake squeal.

Posted on Sep 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT IS CAUSING THIS SQUEALING NOISE IN MY CAR?


Sounds like a dragging brake pad. There is an adhesive that can be applied between the calipers and the pads. Or it may be time for a rear end brake change.

Apr 14, 2016 | Cars & Trucks

1 Answer

High pitch droning sound


There is a metal tab on some pads that contacts the rotor to make hideous noises telling the driver they need to replace the brake pads. It's in your owner's manual.

May 05, 2015 | Cars & Trucks

1 Answer

I have a 2005 Tahoe and recently the SERVICE STABILITY came on the dash board. It makes a real high pitched squealing noise while driving and it's now constantly making the noise. And getting worse. I know...


This stuff is my specialty, sounds like POSSIBLY your abs pump motor failing (the abs module mounts to the abs hydraulic pump where all the brake lines go into) i.e abs module=brain abs pump=muscle to put it simply. get the fault code(s), its going to be something like C0265 or C1214 basically "C" then 4 numbers. I can tell you EXACTLY what your problem is WITHOUT having to throw a bunch of money away by replacing unnecessary parts.
found this:
  • BRAKES - SQUEAK NOISE ON BRAKE PEDAL APPLICATION
TECHNICAL SERVICE BULLETIN
Bulletin No.: 08-05-22-002C
Date: April 07, 2009
Subject:
Squeak Noise On Brake Apply (Remove Brake Fluid from Master Cylinder and Refill)
Condition
Some customers may comment on a squeak noise when the brake pedal is applied or when released. This noise is normally heard when the brake pedal is slowly applied with the engine on or off, but can occur when the brake pedal is released. The noise may be isolated to the master cylinder area.
Correction
To correct this concern, remove as much of the old brake fluid from the master cylinder as possible and refill with a new DOT 3 brake fluid, P/N 88862806 (in Canada, use P/N 88862807). Start the vehicle and fully cycle the brake pedal until the noise diminishes to allow the new fluid to enter the system. hope this helps! -Tim

Jun 06, 2014 | Cars & Trucks

1 Answer

Clicking noise when applying the brakes on a 2002 cadillac seville


If there isn't a high pitch squeel when applying breaks, then your pads/shoes are worn down to the rivits. If in the rear, could be defective hardware in the brake drum/brake assembly.

Jan 16, 2013 | 2003 Cadillac Seville

1 Answer

What does squeaking sound while breaking mean?


it may mean nothing, squeaks from brakes area not uncommon. on the other hand, if the noise changes when you apply the brakes or if you just haevnt had the brakes inspected latley, it could be the wear indicator rubbing, this means the brakes are at the minimum thickness and should be replaced

Jun 10, 2012 | 2006 Honda Accord

2 Answers

Does a 2002 Chevrolet Impala have C V Joints


Yes it does and it is more than likely what you are hearing.

Nov 29, 2011 | 2002 Chevrolet Impala

1 Answer

When driving or starting the car i notice when using the brakes it makes a squeaking noise - not all the time think its possibly damp causing it as it was raining yesterday and it happened but no rain...


To address your first problem squeaking brakes aka "brake squeal", is most often casued by one or 2 things: "Pad vibration" or a "low brake warning sensor".

Pad vibation is usually caused by ineffective pad anti-rattling clips & hardware that allow the pads to vibrate at a super fast speed whenever the brakes are applied, thus causing a high pitch brake squeal. To correct this, replace all the pad hardware and anti-rattling clips and make sure you use a quality pad set that has anti-rattling plates attached to the backs of them. Weather conditions do affect brake squeal, that is why it seems to be worse at times.

Low brake warning sensor squeal occurs when your brake pads reach the point of replacement, the sensor attached to the pads scrapes on the rotor which produces a high pitch squealing sound to warn you it's time for new pads.

As far as your second problem goes (a knocking sound), I'll need more information about the problem before I can offer a possible cause (eg. happens on left or right turns, while going over bumps, at high or low speeds, accellerating...).

Sep 22, 2011 | 2001 Ford Focus

1 Answer

I have a 1997 chrysler concorde and when I apply my brakes they make a funny noise like a leaking air pump. Any ideas? but the brakes are working OK


my idea is that your power steering booster unit is leaking and needs replaced. that is the large double bowl shaped thing which sits between the master cylinder and firewall. not easy to replace.

Feb 22, 2011 | 1997 Chrysler Concorde

3 Answers

2002 Jeep Grand Cherokee Laredo - whining noise driver's side


checked the wheel bearings and sometimes the clips will rub the rotors

Sep 08, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Weird noises in drive and reverse


The high pitched whine in reverse sounds normal for a honda. Ever honda I have had makes a similar noise while in reverse. The spinning, scraping noise in drive is not normal. You might want to see a mechanic about that.

Apr 30, 2009 | 2002 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...