Question about 2007 Hyundai Veracruz SE

Open Question

Battery light and seat belt light flashing - 2007 Hyundai Veracruz SE

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Seatbelt warning light keeps flasing when seatbelt is fasten


Belinda, could be a bad wire,plug,seat belt switch/sensor. Have a good tech. diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Seat Belt And Battery Lights Flashing
Driver Side Seat Belt Buckle Open short
Hyundai Seat Belts Repair Replacement

Aug 11, 2016 | 2005 Hyundai Accent

2 Answers

How can I fix the seatbelt light that keeps flashing after I put on the seatbelt. Flashes the whole time I'm driving.


You may have to replace the female receptical for the seat belt. There may be a switch inside the latch that has gone bad.

Jul 04, 2015 | 2002 Jaguar X-Type

2 Answers

Flashing seat belt light


There are sensors in some car seats that pick up if someone is sitting in the seat, when the car is started, the safety system will check that if there is a person in the seat, if so, the seatbelt has to be clicked to stop the light from flashing. I have found that if I have a heavy weight sitting on my passenger seat, the warning light will come on to say the seat belt is not fastened as it thinks someone is sitting there. It could be a faulty switch under the seat that is causing your problem.

Apr 12, 2015 | Seat Cars & Trucks

1 Answer

Air bag light flashes 5 times then 1 time


That flashing indicates fault code 51. Fault code 51 indicates a problem with the driver's seat belt circuit. The seat belt buckle has a switch in it to determine if the belt is buckled up when the seat is occupied [determined by a pressure sensor in the seat bottom]. The switch in the buckle is either bad or the wiring to the switch is either short or open circuited.
Use of a computer scan tool can help narrow down the problem. There are four different scan tool fault codes relating to code 51. They are B2432, B2433, B2434 & B2435. These codes will give you more defined information on the actual fault. Most common faults are either a bad switch in the seat belt buckle or damaged wiring to that switch. Damaged wiring is usually caused by the driver placing objects under the driver's seat, which damage the wiring coming out of the seat belt. It is also possible to have a bad seat belt computer [Restraints Control Module or RCM]. A bad RCM is not common. Check for damage to the seat belt wiring under the driver's seat. Best to remove the seat and lift up the carpeting to do this. If no physical damage or water corrosion damage is present, replace the seat belt. After repairs, disconnect the battery for 1 minute to clear the fault code from the RCM's memory.

Aug 27, 2014 | 2003 Ford Crown Victoria

1 Answer

Why flashes yellow illuminated after the ignition is switched on and not goes out after the engine starts


You talking about the seat icon? Which light is flashing? If you do not connect seat belt that light will not go out. If you have a dog the seat belt light will flash if it is on front passenger seat. Which icon light is flashing?

May 01, 2014 | 2012 Chevrolet Spark

1 Answer

My 2006 Buick Lacrosse warning light started dinging while I was driving and the seat belt light for passenger seat started flashing even though there was no one in the seat. After stopping the car I...


It sound like two or three separate problems, but it's hard to tell. The seat belt warning could be a faulty switch which senses a passenger in the seat, while the trunk lid opening could be a battery problem in the key fob. However, if the door locks still work with the same key fob, the problem is more likely with the lock on the trunk. Not starting after stopping could be a battery problem.

Sep 13, 2017 | 2006 Buick LaCrosse

1 Answer

The seatbelt light in the gauge on the dashboard keeps flashing on and off. Passengers wear seat belts when driving..... I have disconnected the battery, recently to replace a burned out head light bulb....


Dear,

the blinking light only indicates the belt position of the Driver seat only.
if you click the seat belt in the fixer.......you will find the light getting off....

thanx

May 16, 2011 | 2004 Nissan XTerra

2 Answers

2001 air bag light flashing - what is reset fix?


Here's a quick check list for most common cost of SRS / Air bag problem.


Dirty contacts on driver and passenger seat belt buckles

Dirty contacts on seat belt connectors (under seats)

Dirty contacts on driver and passenger sides weight sensors (under seat)

Seat covers

Weight on passenger seat

(Example: grocery package trigger SRS / Air Bag light on the way home.)

I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity2_bing.gif problem.

I DO NOT disconnecting the negative battery connector to clean the code(s)

Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.

======

Please rate me answer if it is useful to you.


Cheers,

Mustgo

Nov 16, 2009 | 2001 Mercury Villager

1 Answer

Instrument cluster damaged after battery shorted out.


4 resistors on the back of cluster bad get them at radio shack.

Dec 14, 2008 | 1998 Buick Regal

Not finding what you are looking for?
2007 Hyundai Veracruz SE Logo

Related Topics:

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...