Question about 2002 Mercedes-Benz C-Class

1 Answer

My turn signal light is not working on the left side. I changed the bulb, no luck. The message board says "check bulb, F, L.

Posted by on

  • Jeff Turcotte
    Jeff Turcotte Sep 04, 2010

    check bulb socket for corrosion. May be an open in the wiring too. Trace wiring as far as you can from bulb and look for cut wire or bad connection.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 229 Answers

It's have to do small modification in your light modified wiring can buy through nearest Mercedes dealer it's require to remove signal wire from your light wiring connector and fixed in to new wiring connector and other connection to the body ground wire comes with new holder then fix it in to the light as normal way it will not get problem again modification wiring is not much expensive do the same to other side light too

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Front right and back right turn signal wont work but the front left and back left do


first check the bulbs on that side by visual or changing to the other side if you can't see that well if the bulbs from the front and back work or are good when checked the flasher has blown out on one side and you have to replace it other possible cause could be a broken wire for the right side lights so look at the connectors for that side front & back if all is good one more thing could do this the actual turn signal lever that you use to activate the signals could be bad for the right side especially if it does not go back to the normal position after making a turn and the steering wheel rotates back to it's normal position but the turn signal lever does not click back to the center position this would burn out that side from the signal constantly being on good luck stephen

Jan 03, 2015 | 1991 Ford Probe

2 Answers

Where is the fuse located for left brake light on fuse box


Brakes are generally not fused seperately. Have u check the bulb in the left side.

Sep 15, 2014 | Cars & Trucks

1 Answer

Right front side turn signal does not work replaced all bulbs and checked fuses headlight flashers work when hazards are on front to back except driverside turn signal ,in dash right stays solid left


I don't believe it would be a bad ground for just one light. It could be a wire, a socket connector, or the bulb socket itself. See if the wire has power at the socket when signaling left, with key on. If there is power, probably a bad socket or connector. If no power, check for power coming from flasher-the wire going to front left, or driver's side. If you have power from the flasher, but nothing at the socket, the wire has probably broken.
Good luck.

Feb 06, 2013 | Cars & Trucks

2 Answers

Need to fine the fuse for the left turn on a 1999 w900 kenworth


only has one fuse for turn signals . if both left turns do not work it is most likely in the turn signal switch.

Jan 29, 2013 | Cars & Trucks

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

1996 chevrolet C1500. The back left turning signal/brakes light is not working. Front left turning signal works fine.(Faster than usual). The bulb comes on when the headlights are on(steady), but does not...


The bulb for the turn signal/brake light is a double filament bulb. It will come on with the lights on, but should light the second filament, making it brighter, with the brakes applied or turn signal on. It could just be a bad bulb, but one common problem on these years of truck is the rear light circuit board and requires the whole assembly to be replaced. Start by checking the bulb first though.
Hope this helps. Good luck!

Apr 18, 2011 | Chevrolet C1500 Cars & Trucks

1 Answer

License plate lights do not work. Bulbs changed still does not work. The right brake light does not work. Changed bulb and plug. Turning signals work, tail lights work. All works on the left side.


Well for the license plat you might wanna check the fuse. and the brake light if one works fine then I'm sure you need a new bulb in the other side. Good luck

Jan 09, 2011 | 1999 Ford Windstar

1 Answer

Brake light/turn signal no not work on left side only.


check fuse number 7 in Engine Compartment Fuse Box , if its ok you need change turn signal switch

Mar 15, 2009 | 1996 Ford F150 Regular Cab

Not finding what you are looking for?
2002 Mercedes-Benz C-Class Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...