Question about 1999 Mercury Grand Marquis

1 Answer

Heater hose nipple blew out of engine. How does this part stay in,does it have a retainer clip?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Yes it has a clip retainer. you can get a new hose end at a parts store or from the dealer.

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can iget the hot water to the front heater coil both hoses stay cold


does the engine's cooling system thermostat open and close?
(does upper and lower RAD hose feel warm then warmer)
are the hoses to the heater coil (both hoses) free of obstructions?
(pull them off and blown them out)
is the heater coil able to pass coolant in one side and out the
other? Hook up garden hose to inlet house (disconnect from pump hose nipple) disconnect heater outlet hose from pump and drop into a pail to catch outflow)
Does the water pump work as it should? ( should see fluid flow when looking through rad cap opening while engine is running)

Jan 27, 2015 | 2005 Kia Sedona

1 Answer

I NEED A HEATER HOSE DIAGRAM FOR MY 98 VOLVO S70 T5 TURBO PRIOR OWNER BYPASSED THE HEATER THANK YOU JAMES CUMMINGS


You will likely need the heater hose junction (Volvo p/n 3522035) since it always leaks and it connects the heater core to the heater hoses on the firewall. The kit usually contains the retaining clips, but not the O-rings to connect to the heater core. You will also need the outlet and inlet hoses (9186847 and 9186849). The length, angles and configuration of these hoses will help you understand their orientation in the engine bay. They can only go on one way. Else, they won't connect to the pipes from the engine.

Oct 10, 2014 | 1998 Volvo S70

2 Answers

Heater core removal. under the dash or remove???


Hi there,

Firstly, you don't have to remove the dash on them. There is a screw in the center of the lower cover that is sort of hidden in a hole there. Here are a few steps to help:
  • Disconnect the negative battery cable and drain the cooling system.
  • Disconnect the heater hoses from the heater core inlet and outlet connections in the engine compartment.
  • Allowing residual coolant from the heater core to drain. Cap the openings.
  • Working inside the vehicle, remove the lower instrument panel sound insulator.
  • Remove the heater floor outlet duct screws or clips and remove the duct.
  • Remove the heater core cover by removing the attaching screws and clips.
  • Remove the heater core cover.
  • Remove the heater core retainers and remove the heater core.
  • Position the heater core in the housing and install the retaining straps.
  • Position the heater core cover on the housing and install the attaching screws and clips.
  • Install the floor outlet duct and attaching screws or clips.
  • Install the lower instrument panel sound insulator.
  • Working in the engine compartment, connect the heater core inlet and outlet hoses.
  • Fill the cooling system.
  • Start the engine and check for coolant leaks. Allow the engine to warm up sufficiently to confirm the proper operation of the heater.
  • Recheck for leaks. Check the cooling system level.
Good luck!

Jan 16, 2011 | 1990 Pontiac 6000

1 Answer

Windows fogging heater core replacement / location


  1. Disconnect the negative battery cable and drain the cooling system.
  2. Disconnect the heater hoses from the heater core inlet and outlet connections in the engine compartment.
  3. Allowing residual coolant from the heater core to drain. Cap the openings.
  4. Working inside the vehicle, remove the lower instrument panel sound insulator and look for where the air blows to your feet.
  5. Remove the heater floor outlet duct screws or clips and remove the duct.
  6. Remove the heater core cover by removing the attaching screws and clips.
  7. Remove the heater core cover.
  8. Remove the heater core retainers and remove the heater core
  9. Reverse order to install leaving the covers off at first then connect all hoses, refill and check for leaks before putting covers back.

Dec 17, 2010 | 1999 Oldsmobile Cutlass

1 Answer

My escort has no go power like its getting no gas


Try a fuel filter:
Fuel Filter REMOVAL & INSTALLATION The in-line fuel filter is located in the engine compartment between the fuel tank and the fuel rail.
  1. Properly relieve the fuel system pressure.
  2. Disconnect the negative battery cable.
  3. Position a suitable container below the fuel filter to collect any excess fuel that may leak from the filter and lines. CAUTION
    Observe all applicable safety precautions when working around fuel. Whenever servicing the fuel system, always work in a well ventilated area. Do not allow fuel spray or vapors to come in contact with a spark or open flame. Keep a dry chemical fire extinguisher near the work area. Always keep fuel in a container specifically designed for fuel storage; also, always properly seal fuel containers to avoid the possibility of fire or explosion.
  4. Remove the retaining clip from the fuel filter upper hose.
  5. Disconnect the upper hose from the fuel filter and drain any excess fuel into the container. Plug the hose.
  6. Raise and safely support the vehicle.
  7. Remove the retaining clip from the fuel filter lower hose.
  8. Disconnect the lower hose from the fuel filter and drain any excess fuel into the container. Plug the hose.
  9. Lower the vehicle.
  10. Unfasten the filter retaining clamp screw and remove the fuel filter. Fig. 1: The fuel filter is located in the engine compartment, between the fuel tank and fuel rail — 1.9L engine's underside shown 90981p47.jpg
    Fig. 2: To remove the fuel filter upper hose clip, grasp the clip (arrow) . . . 90981p48.jpg
    Fig. 3: . . . and gently pull the clip from the hose. (Lower hose clip removal is similar) 90981p49.jpg
    Fig. 4: Grasp the hose and pull it from the fuel filter 90981p50.jpg
    Fig. 5: Unfasten the filter retaining clamp screw 90981p51.jpg
    Fig. 6: Grasp the filter and remove it from the vehicle 90981p52.jpg
    To install:
  11. Position the fuel filter and tighten the filter mounting clamp.
  12. Remove the plug, then connect the upper hose to the filter and install the hose retaining clip.
  13. Raise and safely support the vehicle.
  14. Remove the plug, connect the lower hose to the filter and install the hose retaining clip.
  15. Lower the vehicle.
  16. Connect the negative battery cable.
  17. Start the engine and check for leaks.
prev.gif next.gif

Aug 01, 2010 | 1995 Ford Escort

1 Answer

How to remove heater core from buick cintury 1995


With Air Conditioning
CAUTION When draining the coolant, keep in mind that cats and dogs are attracted by ethylene glycol antifreeze, and are quite likely to drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.

  1. Disconnect the negative battery cable and drain the cooling system.
  2. Disconnect the heater hoses from the heater core inlet and outlet connections in the engine compartment.
  3. Allowing residual coolant from the heater core to drain. Cap the openings.
  4. Working inside the vehicle, remove the lower instrument panel sound insulator.
  5. Remove the heater floor outlet duct screws or clips and remove the duct.


cefb957.gif
Remove the heater floor outlet duct screws or clips ...


0e95988.gif
... then remove the heater floor outlet duct

6. Remove the heater core cover by removing the attaching screws and clips.

7. Remove the heater core cover.

8. Remove the heater core retainers and remove the heater core.


900321a.gif
Remove the mounting bolts which retain the heater core

To install:
  1. Position the heater core in the housing and install the retaining straps.
  2. Position the heater core cover on the housing and install the attaching screws and clips.
  3. Install the floor outlet duct and attaching screws or clips.

0aed66b.gif
Exploded view of the heater core and case assembly

  1. Install the lower instrument panel sound insulator.
  2. Working in the engine compartment, connect the heater core inlet and outlet hoses.
  3. Fill the cooling system.
  4. Start the engine and check for coolant leaks. Allow the engine to warm up sufficiently to confirm the proper operation of the heater.
  5. Recheck for leaks. Check the cooling system level.
  1. Drain the cooling system.

72f974e.gif
Heater and air conditioning module assembly

CAUTION When draining the coolant, keep in mind that cats and dogs are attracted by the ethylene glycol antifreeze, and are quite likely to drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.


  1. If equipped with a diesel engine, raise and support the car on jackstands.
  2. Disconnect the hoses at the core.
  3. On diesels, remove the instrument panel lower sound absorber.
    1. Remove the heater duct and lower side covers.
    2. Remove the lower heater outlet.
    3. Remove the two housing cover-to-air valve housing clips.
    4. Remove the housing cover.
    5. Remove the core restraining straps.
    6. Remove the core tubing retainers and lift out the core.
  4. To install:
    1. Install the core, then attach the core tubing retainers.
    2. Attach the core restraining straps.
    3. Install the housing cover, then install the two housing cover-to-air valve housing clips.
    4. Install the lower heater outlet, then attach the heater duct and lower side covers.
    5. On diesels, install the lower instrument panel sound absorber.
    6. Connect the hoses at the core.
    7. Lower the vehicle if raised and supported.
    8. Fill the cooling system.
    9. Start the engine and check for coolant leaks. Allow the engine to warm up sufficiently to confirm the proper operation of the heater.
    10. Recheck for leaks. Check the cooling system level.

Mar 07, 2010 | 2000 Buick Century

1 Answer

I need to install a heatercore on a 92 olds cutlass 3.3 engine not sure howto install need instructions on removal and replacement.


  1. Disconnect the negative battery cable and drain the cooling system.
  2. Disconnect the heater hoses from the heater core inlet and outlet connections in the engine compartment.
  3. Allowing residual coolant from the heater core to drain. Cap the openings.
  4. Working inside the vehicle, remove the lower instrument panel sound insulator and look for where the air blows to your feet.
  5. Remove the heater floor outlet duct screws or clips and remove the duct.
  6. Remove the heater core cover by removing the attaching screws and clips.
  7. Remove the heater core cover.
  8. Remove the heater core retainers and remove the heater core
  9. Reverse order to install leaving the covers off at first then connect all hoses, refill and check for leaks before putting covers back.

Jan 17, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

What is the best way to replace a heater core on a 97 Mercury tracer? And where is it located?


This is for the 1.8L and the 1.9L engine:

1.8L & 1.9L Engines CAUTION NEVER open, service or drain the radiator or cooling system when hot; serious burns can occur from the steam and hot coolant. Also, when draining engine coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze and could drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantities. Always drain coolant into a sealable container. Coolant should be reused unless it is contaminated or is several years old.

  1. Disconnect the negative battery cable. If equipped, disable the SRS system.
  2. Drain the cooling system.
  3. Disconnect the heater hoses at the firewall.
  4. Remove the instrument panel.
  5. Disconnect the mode selector and temperature control cables from the cams and retaining clips.
    1. Remove the necessary defroster duct screws and loosen the cap screw that secures the heater-to-blower clamp.
    2. Remove the three heater unit mounting nuts and disconnect the antenna lead from the retaining clip.
    3. Remove the heater unit.
    4. Remove the insulator and the four brace cap screws.
    5. Remove the brace.
    6. Remove the heater core from the heater unit.
  6. To install:
    1. Install the heater core into the heater unit.
    2. Install the brace.
    3. Install the brace cap screws and the insulator.
    4. Place the heater unit into position, then attach the defroster and floor ducting.
    5. Install the heater unit mounting nuts.
    6. Tighten the heater-to-blower clamp cap screw and install the defroster duct screws.
    7. Connect the antenna lead to the retaining clip.
    8. Install the instrument panel.
    9. Connect and adjust the mode selector and temperature control cables.
    10. Connect the heater hoses at the firewall.
    11. Fill the cooling system and connect the negative battery cable.
    12. Start the engine and check for leaks.
    13. Check the coolant level and fill as necessary.
f97a909.gif

Nov 16, 2009 | 1997 Mercury Tracer

1 Answer

I want to flush the heater core


Take off the hoses at the bulkhead/firewall that go to te heater core, use a garden hose and back flush the core by forcing water through the smaller of the 2 hose nipples, if the water runs right through then you have a heater air temp control door actuator problem

Dec 24, 2008 | 2005 Pontiac Grand Prix

2 Answers

Where is the fuel filter on a 2001 mercury cougar and what tools are needed to replace it?


You will need a straight-head screw driver and possibly a 1/4 inch nut driver.

The hoses are held by white plastic retaining clips that you pop off with the screw driver. My new filter came with new retaining clips in case the old ones break during removal. The filter itself is held in place with an adjustable strap like one you would use for any hose. You can use a screwdriver, but I prefer to use the nutdriver to avoid mangling the screw.

You can change this filter without having to actually put your body underneath the vehicle. Jack it up at the rear jackpoint just fore of the rear right wheel. The filter is slighty forward from there. You can lay on the ground next to the vehicle and just reach under to change the filter. It is about the size of a regular coffee mug. It is cylindrical in shape with one end rounded with hose nipple and the other end flat with hose nipple.

Before removing the fuel filter I tried pulling the fuel pump fuse (15A fuse #9 in the power distribution fuse box in the engine compartment next to the battery) to bleed the pressure off the line. The engine however never died, but acted as if it would, so I shut it off. I did not know where to actually disconnect the pump. Pulling the fuse seemed to help anyway. The hoses were not under pressure, though still about a half-cup or so of fuel still leaked out, plus the fuel in the filter itself. That's normal.

1. Start engine, pull fuse, wait for engine to choke, turn off.
2. Jack up car, use Jack-stand for safety.
3. Pop clips, pull off hoses.
4. Loosen strap, remove old filter.
5. Reverse for installation.

Jul 15, 2008 | 2001 Mercury Cougar

Not finding what you are looking for?
1999 Mercury Grand Marquis Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

fordexpert

Level 3 Expert

5622 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...