Question about Saab 9 3

Open Question

How do i replace my front crankshaft seal on a saab 93 2004

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

evanusa
  • 197 Answers

SOURCE: headlight replacement 2000 Saab 93

To replace the headlamp on a Saab 9-3, open the hood. Behind the headlamp there is a round black plastic cover; screw clockwise and pull back; there is a metal clip holding headlamp in place (9003 i believe is the halogen number). locate top of clip and move very slightly clockwise; the top will pivot down on a hinge; release the wire harness and pull out bulb. Retrace these steps to introduce the new bulb to your Saab.

Hope this helps. Please leave a rating! FIXYA!

Posted on Apr 28, 2009

  • 236 Answers

SOURCE: Front Brake Pads 2004 Saab

allen wrench

Posted on Jun 16, 2009

  • 1129 Answers

SOURCE: Saab 93 2001 front windows blow a fuse putting windows down

The window motor is working too hard go to Napa and ask for the silicon lube made for windows and lube up the window rims and guides this should allow the motor to work less hard.

Posted on Aug 05, 2009

  • 14036 Answers

SOURCE: I have saab 93 2004. Has 74K miles. Check engine light on. help

TAKE CAR TO ANY AUTO ZONE THEY WILL SCAN IT FREE TO SEE WHAT SENSOR IS BAD.

Posted on Apr 02, 2010

Testimonial: "Thanks. Reasons given seems logical. Will take it to Autozone & have it checked."

countrybo331
  • 79 Answers

SOURCE: got Check engine light code P 0442. saab 93 2004 73k Miles

P0442 Evaporative Emission Control System Leak Detected (small leak)....this actually should not cost that much...its more then likley a leak on 1 of your hoses...if u take it to the dealler the parts and stuff is more expensive...but if u take it to the mechanic shop then they are more then likley goin to tell you u need stuff that u really dnt in it probally in hte long run cost you more there....but its up 2 u...any more questions feel free to ask...hope this helps

Posted on Apr 02, 2010

Testimonial: "Thanks for advice. I have long trip planned approx 1000 miles. Can this wait or should I have it rectified before I start for the trip."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I replace front crankshaft seal on a 2005 Chevy aveo


Chiltons repair book any library or buy it at auto store

May 04, 2016 | Cars & Trucks

1 Answer

On a 1998 Chrysler Cirrus does the transmission have to be removed for the front seal to be replaced?


No, that would be for the rear crankshaft main seal, if it had to be replaced. The front crankshaft seal will be behind the front crankshaft pulley, usually in the timing belt cover.

May 14, 2015 | Chrysler Cars & Trucks

1 Answer

Replacing water pump & timing belt on 2001 Dodge Stratus R/T. Easy to replace front main seal, too?


oil seal failure is the main killer of rubber timing belts . Oil can come from the crankshaft seal --the cam shaft seal/s and the hydraulic belt adjuster.. So if you have the front off and am replacing the timing belt then it is fools economy not to replace the seals and any idler pulleys at the same time.

Jan 09, 2014 | Cars & Trucks

1 Answer

How to replace front crankshaft seal on 2005 chevy aveo


harmonic balancer out there is sensor.

Mar 13, 2013 | Cars & Trucks

1 Answer

Leaking front crankshaft seal


Quite a complex job as seal is behind timing belt. if you replace timing belt kit all seals are included

Nov 27, 2012 | 2006 Kia Sedona

1 Answer

How to replace front crankshaft seal


replace Front main oil seal mighty max 1988 can i get a digram

Aug 24, 2012 | Mitsubishi Mighty Max Cars & Trucks

1 Answer

I was told I have to replace the crankshaft seal and oil pan gasket on my 2000 chevy malibu and will cost approx. $380.00. Also is the rear main seal the same thing as the crankshaft seal??? Thanks!


Well sometimes.... the front crankshaft seal is usually called a crank seal, or the front timing cover seal but the rear crank seal is (usually) called the Rear Main crank seal. In order to replace the rear seal , the transmission will need to be removed. If its the front, then the harmonic balancer will be removed. $380 sounds cheap. As you will need a oil seal, oil pan gasket, oil, filter, labor and tax. Maybe even a lower engine mount.

Feb 01, 2011 | Chevrolet Malibu Cars & Trucks

2 Answers

How hard is it change front and rear oil seals?


By front and rear oil seals, I am assuming that you are refering to the CRANKSHAFT front and rear oil seals.
The front crankshaft oil seal is under all the components that must be removed to replace the timing belt.
The standard labor time to replace this seal is 4.0 hours for the 4 cylinder and 4.8 hours for the V-6.

The rear crankshaft oil seal requires removal of the transaxle to replace it.
The standard labor time required to do this is 7.3 hours

This is not a job for a novice unless you want to purchace a service manual and spend a lot of time reading the instructions before jumping into it.

Dec 01, 2010 | 1995 Honda Accord

1 Answer

I need but cant find a Chilton manual for my 1995 tercel. All I find are up to 1994. 1995 was the first year of the fifth generation Tercel so I doubt 94 would work. I need to find something so I can...


I only found a front crankshaft seal replacement not the whole crankshaft: Front Crankshaft Seal REMOVAL AND INSTALLATION 1.5L (5E-FE) Engine Tercel NOTE: The front oil seal can be removed from the engine without removing the oil pump.
  1. Disconnect the negative battery cable from the battery. On vehicles equipped with an air bag, wait at least 90 seconds before proceeding.
  2. Remove the front covers and the timing belt.
  3. Remove the crankshaft timing belt sprocket. WARNING
    When removing the front seal, be extremely careful not to damage the crankshaft.
  4. Using a knife, cut off the oil seal lip.
  5. Tape the end of a flat bladed tool to avoid damaging crankshaft. Pry out the oil seal using the taped end of the tool.
  6. Inspect the oil seal riding surface on the crankshaft for signs of wear or damage. To install:
  7. Wipe the seal bore with a clean rag.
  8. Apply multipurpose grease the lip of a new oil seal.
  9. Drive the oil seal into place using tool SST 09309–37010 or an equivalent seal installer tool. Make sure the seal surface is flush with the oil pump case edge. Work from the front of the cover. Be extremely careful not to damage the seal.
  10. Install the sprocket without disturbing the Woodruff key.
  11. Install the timing belt and front covers.
  12. Connect the negative battery cable to the battery.
  13. Start the engine and check for leaks

Aug 01, 2010 | 1995 Toyota Tercel

1 Answer

How to replace Honda front Crankshaft Seal


Have to take off the crankshaft pulley to get at the Crankshaft Seal.

Use a hooked seal remover to dig in and pull the seal out without damaging sealing surfaces.

Jul 20, 2010 | 1995 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...