Question about 2004 Chevrolet Aveo
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 2004 CHEVY AVEO THROWING CODES P0700 TRANSMISSION CONTROL SYSTEM,P0300 RANDOM MISFIRE DETECTED, P1781 ENGINE TORQUE SIGNAL CIRCUIT. CAR RANDOMLY DIES DRIVING ON THE HIWAY, PULL OVER,STOP RESTART CAR G
there is a Technical service bulletin for this problem, the number of the TSB is 01575, TSB Date:January 1, 2004
It has to do with engine valve seating problems.
Posted on Jun 03, 2009
SOURCE: 2004 chevy aveo that the
P0128 - the thermostat may be stuck open or has anyone
put a colder thermostat in the car,because once it starts to get cold
it will throw a SES with a colder then stock thermostat. Replace the Thermostat should fix this problem.
PO700 is a code telling you there are codes in the TCM of some late model cars where the Transmission control module has been removed from the PCM the vehicles main computer , and basically it happens when the TCM has a issue within itself or the transmission that sets a code and it sends a request for the PCM to illuminate the SES or CHECK engine light. To get at the TCM codes requires in most cases the most up to date scanner software purchased after the cars model year and as of yet is still a little iffy. Standard OBD11 scanners will generally not be able to see these codes.
P1781 is set during engine start up when the ECM & TCM do not communicate properly during initial power up. It will only illuminate the service light if the condition occurs in 2 consecutive start cycles, but the DTC will be stored in the failure records after the first cycle.
Replace the Thermostat and go to a transmission shop that can read the DTC codes with a scanner and reset the ECM for clear the codes. Most Transmission shop will do that free of charge, if not turn the Ignition key's to the on position and and pull the ECM fuse out for 30 seconds and then place it back in. Turn the ignition keys to the off position for 10 seconds and then start the car, the engine may stall but let it. Just start the engine again, the ECM is just relearning the engine and go for a test drive. This will clear all the DTC history in the ECM like the day it cam off the assembly line. Good luck and keep me posted, be glad to answer ay more question.
Posted on Oct 30, 2009
P2135 Throttle Position Sensor (TPS) Property Malfunction, remember this is not a car that is built by GM it is a Korean import.
Posted on Jun 07, 2010
Tips for a great answer:
Sep 23, 2016 | 2004 Chevrolet Aveo
Feb 22, 2015 | 2004 Chevrolet Aveo
Feb 12, 2011 | 2004 Chevrolet Aveo
Apr 11, 2010 | 2004 Chevrolet Aveo
Apr 05, 2010 | 2004 Chevrolet Aveo
Jun 03, 2009 | 2005 Chevrolet Aveo
Dec 03, 2008 | 2004 Chevrolet Aveo
Sep 02, 2008 | 2006 Chevrolet Aveo
58 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: