Question about 1989 Ford Ranger

1 Answer

Fan for the ac quit working 1989 ford ranger - 1989 Ford Ranger

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

It could be the motor itself, the blower motor resistor or the heater switch. if you can jump the motor with a power source, you will find if its working or not, then if its good try the switch. the resistor generally will allow one speed to work, so try all speeds to rule that out.

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford ranger 1989 firing order


Hi there:
1989 Ford Ranger 4WD 2.3 liter SOHC L4



8_16_2012_11_11_41_pm.gif


1989 Ford Ranger 4WD 2.9 liter V-6 VIN "T"

8_16_2012_11_12_18_pm.gif

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 16, 2012 | 1989 Ford Ranger

1 Answer

Need help removing clutch fan and water pump from 1989 ford ranger


the fan is threaded onto the water pump, they do make a set of wrenches to remove the fan. but all you have to do is leave the belt on the water pump and take a long blunt nose punch and put the tip of the punch on the very edge of one of the flats on the big nut on the back of the fan and hit it with a hammer, keep in mind the direction of the threads most are right handed but some of the early ones were left handed threads, if they are left handed it should be marked on the fan shroud, in a pinch the drag bar off the back of a tiller makes a pretty good punch......GOOD LUCK.....just remember righty tighty lefty loosey

Nov 21, 2010 | 1989 Ford Ranger

1 Answer

1989 Ford ranger Flywheel specs for Torque


I don't know. Why doesn't Dana know these things before he takes his truck apart?

May 20, 2010 | 1989 Ford Ranger

1 Answer

Heater won't warm up. need to see diagram of fuse box for 1989 Ford Ranger.


Is the issue that the blower fan is not functioning? If it is functioning, then your issue is not electrical, and more likely that your heater core needs replaced. After the truck is warmed up, are the two hoses that enter the firewall on the passenger side under the hood warm to the touch, or is 1 warm on the other cold?

Dec 18, 2009 | 1989 Ford Ranger

1 Answer

Ford Ranger Overheating when AC is turned on


If this is happening at slow speeds and idle, I would suspect the fan clutch is defective.

Jul 12, 2009 | 1996 Ford Ranger SuperCab

1 Answer

Cruise does not work AC/Heater fan only blows on high. have checked fuses, circuit breakers, and relays????


My Windstar cruise quit, and after lots of looking it was the "switch" on the brake master cylinder. Only when the switch got very bad did many things quit. It was low voltage that made the cruise not work so if not the master cylinder switch you may have a bad connection in one of the many plugs power runs thru causing a low voltage problem..

Jul 11, 2009 | 2006 Ford Ranger

1 Answer

The tepurature gauge barley moves at all, very littl heat output.


dtramp;

I'm betting on the new thermostat fixing the problem.


Good luck Loringh

Nov 13, 2008 | 1989 Ford Probe

1 Answer

1991 ford ranger 4l supercab


idle air control is ran by the power of motor cause the compressor is attached to motor for the compressor you need an idle air control module for a/c compressor this should bring life back to your a/c

Jun 06, 2008 | 1991 Ford Ranger Supercab

Not finding what you are looking for?
Cars & Trucks Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...