Question about 1997 Plymouth Voyager

Open Question

How to change the EGR valve on a 97 plymonth voyager

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: 97 mx-6 egr valve problem

You have to jack the car up, put it on jack stands crawl under. The EGR will be near the fire wall and very hard to reach. It's close the rear motor mount. It is situated next to the rear exhaust manifold on the block, the side closer to the driver. Hope that helps. visit for more help

Posted on Feb 12, 2009

  • 1201 Answers

SOURCE: EGR valve erroe code P0401

Depending on what size engine you have, it's either down on the back side of the engine by firewall, ( you have to take intake breather off to get at it) or by or below the battery. Some of these cars don't have one, depending on the engine.

Posted on Mar 10, 2009

  • 172 Answers


You dont, carb cleaner only removes gunk, where an EGR valve is full of hardened carbon.

Posted on Aug 12, 2009

  • 161 Answers

SOURCE: I have a 96 plymonth voyager the front wipers are

Did you check to see if the wiper motor is working turn the wipers on and you should hear it if it is working if not replace the motor

Posted on Aug 31, 2009

  • 288 Answers

SOURCE: Toyota Corolla DX 97 Engine Light EGR valve PLEASE HELP

You can try cleaning the EGR valve and passages with Seafoam. A bottle costs just a few dollars at any auto parts store or discount store. With the engine running, squirt/spray it in through the brake booster hose, or through the PCV hose. This will cause smoke to come out the exhaust. This is normal and will disappear after a few minutes. If Seafoam does not do the trick, then you can still disassemble the EGR valve from the throttle body and clean it with throttle body cleaner.

Frank's Friendly Cars Maui Car Rental

Posted on Sep 12, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hello my name is Emma I need the manual for a 1998 plymonth voyager 6 cyl 3.3 need a part p0505 Idle control system. (Idle air control valve)

Why are you not at the dealers parts counter or auto parts store
to get what you want?

A PO-505 doesn't mean anything needs to be replaced

Nothing gets replaced until you test it
Do you know how to do that

Jun 09, 2011 | 1999 Plymouth Voyager

1 Answer

What is the valve clearance for 1989 plymonth voyger intake &exhaust non turbo 2.5

I wasnt born yet...but im sure if you trade it in you could get 4500 or more depending on the condition

Feb 28, 2011 | 1989 Plymouth Voyager

1 Answer

Our 97 camry check enginlight is on shop says code is for the erg valve, it does not look that hard to change should i just change the valve with the hoses or the whole unit?

Try to change the egr valve, the part with the hose connected to it. That's, of course, that if the egr solenoid is working correctly. Be sure to clean the carbon out of the recess hole that the egr valve pintle goes into.

Good luck on this repair.

Dec 27, 2010 | 1999 Toyota Camry

1 Answer

Engine code 32 on 1998 plymouth 3.0 engine

Here are the common engine error codes for plymouth.

  • 32 (1984 only) power loss/limited lamp or circuit
  • 32 EGR gases not working (1988) - check vacuum, valve
  • 32 (1990-92, all but Turbo) computer didn't see change in air/'fuel ratio when EGR activated - check valve, vacuum lines, and EGR electrical
  • Aug 12, 2010 | 1998 Plymouth Voyager

    1 Answer

    I have a 96 plymonth voyager the front wipers are

    Did you check to see if the wiper motor is working turn the wipers on and you should hear it if it is working if not replace the motor

    Aug 31, 2009 | 1996 Plymouth Voyager

    4 Answers

    I replaced EGR valve on my 97 Acura 3.0 CL after

    I am fixing to change my EGR valve and the piece of paper that came with the part say this:

    Important Notice
    Before installing this part, check the EGR valve passage in the intake manifold and clear any carbon blockage. Failure to do so will result in repeat malfuntion of the EGR valve system. Refer to a technical service manual or contact a service dealer for proper cleaning procedures.

    Hope this helps.

    Aug 02, 2009 | 1997 Acura CL

    3 Answers

    1999 plymouth grand voyager expresso .3 litre 6 cyl , how do I change the air filter?

    Next to the battery & mount onto the upper frame at the front of the car an air filter housing with 2 self tapping bolts. Remove these and disconnect serveral hoses and lift back, Below this is the air filter housing itself. clips are on the side slip off, and replace filter.

    Jun 10, 2008 | 1999 Plymouth Grand Voyager

    Not finding what you are looking for?
    1997 Plymouth Voyager Logo

    Related Topics:

    80 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Plymouth Experts


    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Plymouth Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides