Question about 1994 Pontiac Firebird
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: no start on 3.4 engine
If your car has spark and runs on starting fluid you have a fuel problem not a cam sensor. 41 lbs of fuel pressure is not enough. Try pinching off the return fuel line and check the pressure. Let me know what you find.
Posted on Dec 18, 2008
SOURCE: How do you program a
Using a fused jumper short between terminal G and terminal A on the ALDL plug. The receiver will then cycle the door locks within one to three seconds this is saying that the reciever is in program mode. Press any button on the remote once the locks should cycle to acknowledge the transmission has been received. Thats it remove the fused jumper lead. you have now finished programming the receiver. Enjoy
Posted on Apr 23, 2009
On most, engine should be lifted a bit to get better clearance. when doing that, make sure you don't lift it too high or it will break stuff on top. Best way is to disconnect engine mounts and put blocks between mounts and block or use a lift bar to keep motor in place.
Posted on Jun 26, 2009
Tips for a great answer:
Apr 03, 2017 | 1994 Pontiac Firebird
Jan 09, 2016 | Pontiac Firebird Cars & Trucks
Jul 02, 2014 | 1994 Pontiac Firebird
Nov 17, 2010 | 1994 Pontiac Firebird
Feb 27, 2010 | 1994 Pontiac Firebird
Jun 10, 2009 | 1994 Pontiac Firebird
Apr 09, 2009 | 1994 Pontiac Trans Sport
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: