Question about 2002 Mitsubishi Lancer

1 Answer

2003 Lancer OZ Can't turn the knob from AC to heat. Help!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

The wire has been bent. If you work the switch twisting gently you can actually get it to switch over from cool to heat. The only way to fix it is to replace the wires for the coolant switch. Rest assured you are not the only one with this problem. Just don't force it. Gently turn back and forth till it moves over.

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The knob for the heat turns but do not switch over to heat


The cable that flips the heater valve has become bent and will always bind until it is replaced. If twist the knob back and forth gently you can work the knob over to the heat side . The bad news , it is easy to turn the heat off , but it will be tricky to finesse the the heater back on again.

Nov 07, 2010 | 2003 Mitsubishi Lancer

2 Answers

AC/Heater control valve :Lancer 2003 Misubishi


The sliding switch on the console is stuck in the cold position and the knob is pulled off. Use pliers to jiggle the switch as best you can. Feel under the center console and you probably will find the cable that is hooked up to the flapper. You'll know because when you jiggle the cold/heater switch at the upper console, the cable will move slightly. At the hookup of the cable to the flapper down under the console (passenger side) try to work the flapper loose to the open (or close) position. At the same time work the sliding switch (with pliers). The flapper will come loose and function properly. Try not to knock of the AC button like I did in the process. It flew off some where under the passenger seat. I'll find it sometime before summer. Ha.

Apr 21, 2010 | 2003 Mitsubishi Lancer

1 Answer

Lancer ES 2003 Hot/Cold knob won't turn. Snaps back to where it previously was. Mechanic said would be very expensive to replace all cables and doors opening and closing air ducts. I'm wanting to try...


You have a broken mounting at the end of the cable,at the housing thats why the temp. control knob doesnt work,you can remove the center console to gain access to pivot the broken piece manually and try to modify it so you can attach the cablr

Apr 14, 2010 | 2003 Mitsubishi Lancer

3 Answers

Can't move the climate control knob to hot of my 2003 Lancer Mitsubishi and please tell me how to get under dashboard.


remove the knob and check it...sometimes the inner metal part breaks...use a plier to turn it...if it does work....replace the knob

Nov 14, 2009 | 2003 Mitsubishi Lancer

1 Answer

I have a problem with my 2003 lancer AC


sounds like you may have a leak or the compresser is not turning on

Sep 02, 2009 | 2003 Mitsubishi Lancer

1 Answer

2003 lancer oz No heat at idle


make sure the coolant level is all the way full

Feb 05, 2009 | 2003 Mitsubishi Lancer

1 Answer

2003 Lancer AC knob wont switch all the way over to heat...


this is due to the cable behind the dash kinking when you move the knob at worst you may need a new cable at best you can try to get your head under the dash and reposition the cable eg. cable tie it over to one side so it dosn't kink

its not to hard to do just a little hard to get to good luck

Dec 17, 2008 | 2002 Mitsubishi Lancer

1 Answer

No heat from Heater 2003 Lancer


check the heat selector is too tight, then look under the driver side on the right to check the white heat selector is jam. You can see a black cable connected to it. Turn the heat selecter knob and check see whether it move freely. good luck.

Oct 21, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...