Question about Subaru Impreza

Open Question

Clock room fuse blows as soon as fuse put in and clock int light,radio,central locking not working

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 188 Answers

SOURCE: VW Polo 2000 1.4 16V Blowing fuse for Central locking / windows

car electrics are a nightmare. the car lights up when a door is open i presume. and by bypassing the central locking. the electric computer says there is a fault. and will not start. that i think is programed in. best thing to do is. go to phone VW dealer ask about diagnostic test without repair. about £35 then fix it yourself. they garentee it right I think. the dealers have come into line better with that kind of thing phone and ask anyway.

Posted on Mar 26, 2009

Ad
  • 104 Answers

SOURCE: the audio/clock fuse blew and every time I replace the 15w fuse it blows

i would try to unplug the clock and the radio change the fuse and see if the fuse blows.

Posted on Apr 30, 2009

  • 1348 Answers

SOURCE: taillights and license plate lights not working

there is a short somewhere.put a test light in place of the fuse.
the light will glow bright.when the short is removed,the light will go dim

Posted on Jul 18, 2009

vwmike2001
  • 74 Answers

SOURCE: clock, and dome light (2004 aveo)

If the fuse blows when you start the car their is a bare wire somewhere in the wiring system that is grounding out when power goes through the system. Thier is a possibility of it being something else that is on the same fuse. You will have to trace the wires to find out what and where it is exposed. Your switches should be tested also. The switch that turns the light on manually and the one located in the door jam itself that turns the light on when opening the door. You should bring your car to a mechanic who is qualified in electrical dianosis. I hope this helped you out. good luck..... It would be appreciatted if you could rate my answer. tThanks....MIKE-

Posted on Aug 25, 2009

  • 1 Answer

SOURCE: 98 toyota corolla radio, dome light, and power locks don't work

2005 toyota corolla radio,dome light,alarm and power locks dont work.

Posted on Nov 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Mitsubishi Lancer no interior lights, clock, speedo, radio, central locking after radio was pulled out and looked at. Fuses for radio etc are all fine ?


something shorted
i would be checking the engine bay fuses
central locking will have a relay

are the other instruments working
and just bulbs out...blown bulbs

radio pulled out ?
was the battery disconnected before radio removed

some radios back that far
had an inline fuse or small fuse at the rear of the radio



26273263-rsk2rli0cjrwxwd2b0tzpg54-3-0.jpg

Sep 02, 2016 | Mitsubishi Lancer Cars & Trucks

1 Answer

Toyota Camry 1992 blows DOME20A FUSE when radio is turned on. RADIO and CLOCK will not come on.


pull the radio and unplug the connector. Replace the fuse. If it does not blow than replace the radio.

Aug 18, 2015 | Toyota Cars & Trucks

1 Answer

Electric locks,interior lights & radio all quit working at same time Why ?


big possibility that the locks, int lights and radio are in one fuse. check the fuse box.

Aug 08, 2014 | 2004 Dodge Intrepid

1 Answer

My fuses for the cigg. lighter, radio, and windows, and dash lights are blown, but when as soon as i change one of them it blows


you have a dead short to ground or chassis on the fuses that blow right out it sounds as if maybe a wire harness got pinched and grounded , did you have any int. work done on truck recently? might be somthin to look at.

Jan 27, 2011 | 2003 GMC Yukon Denali

1 Answer

I jumped started my 2009 kia spectra and now the radio and clock and dome light dont work. i checked all of the fuses but the room or memory fuse it doesnt come all the way out and i dont know how to get...


OK THE PROBLEM HERE IS IF YOU REMOVE THE MEMORY FUSE YOUR CLOCK RADIO AND INTERIOR LIGNT WILL NOT WORK. BUT IF YOU CHANGE IT(IF BROKE OR MALFUNCTIONAL) YOU WILL RESET CLOCK RADIO AND LIHT.
CLICK HERE TO READ
KIA MOTORS COMPLAINT


Jan 24, 2011 | 2007 Kia Sedona LX Minivan

1 Answer

What is the dimmer relay for?


look for a fuse that control the clock and interior light may be labeled int. light.Did you recently installa aaftermarket radio or anything having to be wired??

Apr 26, 2010 | 1991 Toyota Camry

3 Answers

Radio, clock, interior light and central locking not working


This is as a result of a short occurring most likely in the radio harness.

It happened me while working on a customers car. In my case checked all fuses and they all appeared fine, both those under the hood/bonnet and those underneath the steering wheel.

After studying the workshop electrical schemmatics for the car it appears that the clock, interior lights, central locking receiver and radio permanent live/battery are all on the one line.

In effect damage had occurred after the internal fuse panel, therefore all fuses were ok and supplying power across them, but at some point after there was a break in the wire.

However you DO NOT need to remove dash and or replace harnesses to rectify.

Look at the fuse panel underneath the steering wheel. Slot 18 (bottom RHS) and you will see in raised plastic 'BACK UP'. Inserting a 10A fuse here will restore the interior lights, radio, clock and your central locking.

There is a small plastic piece in the way which prevents a fuse going in. Simply use a thin pair of pliers, scissors or a screwdriver (or similar tool) to break this and all pieces of it away until you are able to insert the 10A mini blade fuse.

Problem Sorted!

(I believe the fact this back up exists is because the designers of electrical system at mitsibushi realised it had shortcomings or this would be a potential problem - and included the back up for such an occurence)

Fearghus Quinn
(7 years experienced auto electrician & owner of Car Audio company in Perth Western Australia)

Jan 03, 2010 | 2002 Mitsubishi Lancer

1 Answer

15 amp fuse blows as soon as it's fitted!


Pinched, worn, or otherwise damaged wire somewhere. You will need to investigate further to find the problem.
Get a continuity tester and check for continuity to ground with each wire.
I would suspect a door wire before the dome light wire.
Good Luck

Jan 15, 2009 | 1998 Volkswagen Passat

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...