Question about Ford Escort

1 Answer

Belt routing for 2000 ford escourt - Escort Ford Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

The belt routing is often found on a sticker, under the hood. But, the best I can do is instructions on how to change the belts, step by step:
REMOVAL & INSTALLATION 1.8L Engines ALTERNATOR AND WATER PUMP BELT

  1. Riase the front of the car and support it with safety stands.
  2. Loosen the alternator adjusting bolt.
  3. If necessary, remove the power steering drive belt .
  4. Loosen the alternator mounting bolt.
  5. Remove the alternator and water pump drive belt. To install:
  6. Install the alternator and water pump drive belt.
  7. Adjust the belt tension.
  8. If removed, install the power steering pump belt.
  9. Tighten the alternator adjusting bolt to 14–19 ft. lbs. (19–25 Nm).
  10. Tighten the alternator mounting bolt to 27–38 ft. lbs. (37–52 Nm).
  11. Lower the vehicle.
POWER STEERING PUMP BELT
  1. Raise and safely support the vehicle.
  2. Loosen the power steering pump mounting bolt and nuts.
  3. Remove the drive belt. To install:
  4. Install the belt and adjust the tension.
  5. Tighten the power steering pump mounting nut, located near the adjusting bolt, to 27–38 ft. lbs. (37–52 Nm).
  6. Tighten the pump mounting bolt behind the pulley to 27–40 ft. lbs. (36–54 Nm), and the remaining pump mounting nut to 23–34 ft. lbs. (31–46 Nm).
  7. Lower the vehicle.
1.9L and 2.0L SOHC Engines
  1. Insert a 3?8 in. drive ratchet or a breaker bar in the hole on the automatic tensioner, then pull the tool toward the front of the vehicle.
  2. While releasing the belt tension, remove the drive belt from the tensioner pulley and slip it off the remaining accessory pulleys. Fig. 1: Insert a 3?8 in. drive ratchet or breaker bar into the hole of the automatic tensioner belt routing for 2000 ford - 90981p74.jpg
    Fig. 2: Pull the breaker bar or ratchet toward the front of the vehicle to relieve belt tension 90981p75.jpg
    Fig. 3: Once the tension has been released, remove the belt from the pulleys and the vehicle 90981p76.jpg
    To install:
  3. Position the drive belt over the accessory pulleys.
  4. Insert the 3?8 in. drive ratchet or breaker bar into the hole of the automatic tensioner, then pull the tool toward the front of the vehicle.
  5. While holding the tool in this position, slip the drive belt behind the tensioner pulley and release the tool.
  6. Remove the tool from the automatic tensioner.
  7. Check that all V-grooves make proper contact with the pulley.
2.0L DOHC Engines
  1. Raise the car and safely support it with jackstands.
  2. Use a 13mm wrench to rotate the tensioner clockwise.
  3. Remove the drive belt from the pulleys. To install:
  4. Position the belt on the pulleys.
  5. Use a 13mm wrench to rotate the tensioner clockwise.
  6. Route the belt as shown in the illustration and release the tensioner.
  7. Lower the car.
  8. Run the engine for a few minutes to seat the belt in the pulley grooves.
prev.gif next.gif

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Ford serpentine belt routing


Which 3.0 V6 engine do you have ? I need the engine code
There should be a sticker on the hood or the radiator cover showing the diagram too.

Apr 08, 2013 | 2000 Ford Taurus

1 Answer

Ford 2000 windstar install multi-v belt 3.0 AC


2000 Ford Windstar 3.8L Serpetine Belt Routing
I have seen several posts here about belt routing. Many provide descriptions of the routing but, I didn't see a picture. Pictures help greatly... here's one for 2000 3.8L Windstars.

3.8l_winstarbeltrouting.jpg user_offline.gif

Jan 19, 2011 | 2000 Ford Windstar

1 Answer

Looking for diagram of serpentine belt


0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine


0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine


0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN U) engines


0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN S) engine


0996b43f80208c9f.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.4L SHO engine


0996b43f80208ca0.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Water pump drive belt routing-Ford 3.4L SHO engine
i wasnt sure what engine you had hope this helps good luck

Jan 15, 2010 | 2000 Ford Taurus

1 Answer

Serpentine belt diagram


2000 FORD WINDSTAR - V6 3.0L 182ci GAS FI N U
Belt Routing Diagram Multiple Accessory, w/A.C.

2736613.jpg



2000 FORD WINDSTAR - V6 3.8L 232ci GAS FI N 4
Belt Routing Diagram Multiple Accessory, w/A.C.

a00aa8f.jpg

Also, in the Windstar Owners Manual can find additional information.

I really hope helps with this (remember rated this help) Good luck.

Jan 05, 2010 | 2000 Ford Windstar

1 Answer

Supinten belt on a 2002 ford escourt zx2 2L


Sorry for the delay. I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.


Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine size and options (AC/No AC...etc).

http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/zx2/2002_ford_zx2_drive_belt_routing_diagram.htm

Nov 10, 2009 | 2002 Ford ZX2

1 Answer

Serpentine belt routing 1999 Ford Escourt 2.0 DOHC


Belt ribs under the Bottom pulleys, Ribs over the Top pulley and the Flat side inboard to the Tensioner Pulley. May sure everything is lined up on completion before starting the engine. Regards,DT

Aug 29, 2009 | 1999 Ford Escort

1 Answer

Timing belt


Are you sure it is the timing belt and not the serpentine or accessories belt?

Apr 14, 2009 | 1997 Ford Escort

1 Answer

Serpentine belt


92 FORD PICK UP ALL 7.3 BELT WRAP

hi , this link shows the 7.3 belt routing scroll down the page at that link for the 7.3 .

J5

Jan 20, 2009 | 2000 Ford F250 Super Duty Crew Cabs

5 Answers

Serpentine belt replacement


2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

Jul 24, 2008 | 1999 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...