Question about 2006 Dodge Ram 3500 Truck

2 Answers

Why can,t i get my rear wheel off 1 ton dodge 2007

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

This is not uncommon for big trucks. What I used to do, remove one of the other wheels and with all of the lug nuts removed on the troubled wheel, soak the hub with WD-40, sit 10 minutes, and then use the other wheel to hit the stuck one from the back side, turning it a little with each hit. It will come off! Let me know if it does not or if you ned anything else.

Posted on Sep 03, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 22,095 Answers

Jack it up ,axle stands under it then with wheel nuts off hit it on the inside with a block of wood against the wheel ,using a 7kg hammer with a metal shaft so it doesnt brake the hammer

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is ac relay located on 2007 dodge 1 ton crew cab?


Did you ever find the relay? I was told this pickup does not have a control relay for the AC clutch, but not totally sure.

Aug 14, 2010 | 2007 Dodge Ram 3500 Quad Cab Laramie

1 Answer

1992 Dodge Pickup d150 1/2 ton need to know the torque for the front wheel bearings. Thank you


after packing your berrings tighten the nut untell the wheel stops turning , then back the nut off 1 flat ( the nut has 6 flat) wheel should now turn with minamal drag

May 20, 2010 | Dodge Ram Pickup 1500 Cars & Trucks

1 Answer

Where are the jackstand placement points on a 2007 suburban c1500?


on the frame rails.

behind the front wheel and in front of the rear wheel

Feb 05, 2010 | 2007 Chevrolet Suburban Three-Quarter-Ton...

1 Answer

Connecting code scanner to 2007 chry 300 & 95 dodge 1/2 ton ram


Most obd2 connection ports are under the driver side dash and can be visible without removing any panels. On some chrysler Daimler vehicles you do have to remove a panel to access this service port. If its not located under the dash then it will be located under the hood on the driver side and be capped off and labeled obd2 scan tool service. Simply plug your wire in with the key on and the engine not running and read the codes from your vehicles on board computer/ecm/bcm. Hope this helps. Good luck.

Aug 12, 2009 | 1995 Honda Civic

1 Answer

What is the towning limit fora 94 SLT 1/2 ton V8


That info should be on a sticker in your door jam. The aftermarket intake won't make any difference as far as towing capacity.

Jul 24, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Does dodge offer a rack and pinion steering reduction box


No,at least not at this time,ckeck with some after market vendors

Jul 19, 2009 | 2007 Dodge Ram Truck

1 Answer

Need instructions on how to replace rear drum brakes on 1997 dodge ram 1500 club cab


1/2 ton drums just slide off after the wheels have been remove. you might have to hit the drum with a hammer on the inner side by the backing plate because they wear a grove after a while making them hard to remove.

Jun 10, 2009 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...