Question about 2004 Hyundai Santa Fe

Open Question

1) All the lights inside the car is not working: the roof ( in the front and in the middle )and the dashboard. What to do ? 2) The car loose power on the engine as soon as I put on the air conditioner 3) Can you send me the user manual IN FRENCH of a Hyundai Santa Fe 2004 ( petrol , 2351 cm3 ) because I have it in German as soon as the previous owner is a German. Me, I speak French. 4) What kind of information can i get with the chassis number ? Thank you for your help.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 373 Answers

SOURCE: 2001 hyundai santa fe 6

HI......
OK. just follow the number on the ignition coils.
And the number on the cylinders are.
The FIREWALL side are 1,3,5, Starting from the belts location.
The RADIATOR side are 2,4,6, Starting from the belts location.
The coil with number 1 go to cylinder 1. as the same way the rest of the coils and cylinders.

OK... I hope this solve your question .

THank you for use fixya.

Posted on Jul 25, 2008

  • 1 Answer

SOURCE: Fog Light Replacement Hyundai Santa Fe

The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.

Posted on Apr 06, 2009

goalie39
  • 469 Answers

SOURCE: ''check engine light'' illuminated, 1004 Hyundai, Santa Fe

If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.

Hope this is of some help.
Ed

Posted on Apr 21, 2009

  • 14036 Answers

SOURCE: 2001 Hyundai Santa Fe 4 cylinder..air conditioner

check to see if you have power at the AC AND HEAT blower motor.if yes your blower motor is defective.if you have no power to blower motor look at fuse- blower relay-resistor or bad control switch.

Posted on Jun 23, 2009

dsacco86
  • 1077 Answers

SOURCE: 2002 Santa Fe 4-2351 DOHC Engine running very

The odds are the timing belt wasn't lined up correctly with the timing marks. Best to have the timing belt recheck for correct alignment.

Posted on Sep 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why are my speakers not working


Wires have came loose in back of receiver

Pull out in dash unit and follow wires to speakers

Jan 02, 2016 | Cars & Trucks

1 Answer

Roof unsecure warning light


THERE ARE 2 MICRO SWITCHES LOCATED AT THE FRONT NINGES THAT USUALLY MALFUNCTION.SO WHEN A MALFUNCTION IS DIAGNOSED THE ROOF STOPS WORKING.

Apr 12, 2014 | 2003 Audi A4 Cabriolet

1 Answer

How to replace headlight switch


First check all the light bulb's. Then check all the fuse's related to the lights on the vehicle. If that doe's not solve the problem, Check the relay that may be associated with the exterior rear light's. If that does not solve the problem, You either have a bad light switch itself located under the light knob that you are turning the lights on and off with, which is located on the dashboard display panel in various different location's depending on the make, model and year of your motor vehicle. and if that does not solve your problem it is possibly a wiring shortage which is followed from the light switch through the dashboard, to the fuse box, then through the entire vehicle running from the front of the vehicle to the back of the vehicle on the floor of the vehicle on either side of the vehicle, or the wire's may be located in the interior roof trim located on the inside of the vehicle over the door area running from the front off the vehicle to the rear of the vehicle, or the wire's could also run from the front of the vehicle to the back of the vehicle through the center of the floor or center console area, But most light shortage's are located either at the light fixture itself, which is where the light bulb is located, or either at the fuse in the fuse box, or at the light switch located on the dashboard display area.

Nov 30, 2012 | 1998 Lincoln Town Car

1 Answer

None of the clocks in the dashboard work


C2GT RED
Staffordshire
MODS DONE - ABS sports grille, standard lower grille, Raceland Coilovers, Angel eyes, Tinted windows, RAM Air induction filter, Club Stickers, Edge audio system, exhaust.
MODS Coming - PowderCoated gloss black alloys, front VTR splitters, Black Vinyl roof, wing mirrors colour coded, Heko wind deflectors!

Oct 20, 2012 | Cars & Trucks

1 Answer

How do I take down a dome light in 1993 Jeep Cherokee?


In front of the dome light console is a screw in the middle. She's a bit inside the console. pull it out, take the console downward and if you have the long version, push the console frontwards for about 1 1/2" , then downwards. Be careful, because you have the wring on the backside of the console. Now you can remove the bulbs and so on.. To reinstall it, push the console to the roof and backwards, tighten the screw in.

Oct 19, 2009 | 1993 Jeep Grand Cherokee

2 Answers

Audi A4 Cabriolet roof stopping half way open


refer to the owners manual, for instructions to put down roof by hand, they are not easy to follow, however, the manual key they refer to is in the fuse panel, the 1st lock to undo is in the middle section of the back seat, next the lock for the front section push down roof and lock in place. the warning light at this point will still be flashing, and the display saying roof unsecure. the bit everyone seems to forget is to go back to the middle back seat lock and relock, once that is done, display clears, and both roof and boot should work. i have no idea why this fault occured just hoping its doesn't too often. suggest also you always have engine on when operating roof. hope you find this usefull.

Jul 29, 2009 | 2003 Audi A4 Cabriolet

4 Answers

2004 hummer h2 leaks water from roof over front


Seal all the lights on top. Mine flooded from the water running down the light harness wires. Used clear rtv sealant and fixed it. You will have to remove the seal the two larger lights on the corners.

Jun 23, 2009 | 2004 Hummer H2

1 Answer

Light on dashboard


Yeah you need to hold the button down to close or open the roof, once that light goes off then you can drive!

Apr 23, 2009 | 2000 Porsche Boxster

1 Answer

350z map lights (2) are not working


you have a fuse box under the hood..........located behind your battery.......you have to take battery out to get to it....fuse out

Nov 27, 2008 | 2003 Nissan 350Z

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...