Question about 2005 Ford F-150

1 Answer

My f150 cranks and wont start, plugged in a computer and nothing shows up, screen is blank

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 984 Answers

Crank no start could be
1. Fuel inertia switch ( passenger side kick panel )
2. Fuel pump relay or fuse ( fuse replaceable relay is built into the fuse panel )

3. Most common for crank no start is the FPDM ( Fuel Pump Driver Module ) on the cross member by the spare tire.
Lower the spare, and check to see if the module is cracked.
This is what mine looked like on my 2006, the housing was cracked, but the PCB was still good ( I did not have a problem yet )
my f150 cranks and wont start, plugged in a - e3d0c60.jpg
The cable on the right side of the picture is the spare tire lift, and the picture is taken facing the front of the truck.

Posted on Sep 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car wont start


your missing a fuse or the ignition switch is not turning it on

Mar 31, 2012 | 2000 Mercury Grand Marquis

1 Answer

Just replaced my 5.4 triton engine in my 2004 truck, engine was laid up for 2-3 months that I purchased from a auto dealer. It fired up fine, after short ride it developed a bad misfire, so I changed out...


Kind of open territory, but check fuel pressure at the rail, check for spark (does tach move when you crank it?)-check the fuel regulator for gas inside the vacuum hose, and make sure things are hooked up like the Mass Air Flow harness, throttle position sensor, even the IAC. Harness to the ECM should be looked at to see if it is plugged in tightly-non-starts can also be found on Fords often be just unplugging and plugging the crank sensor.

Apr 21, 2011 | 2004 Ford F150

1 Answer

Running fine. Died and wont start. Cranks fine


can you hear the fuel pump kick on when you turn the key on but without crancking the engine? Generally the fuel pump will prime for about two to three seconds when you first turn the key on. if you don't hear it that's probably the culprit. If you do hear it it may be a bad pump. also should check to see if you have spark. You can do this by removing a plug wire and using another spark plug. Ground the plug to somthing metal and have someone crank the engine (making sure you are not touching the plug or metal) You should see a spark while cranking. Good luck

Jun 20, 2010 | 1985 Ford F150

1 Answer

Engine cranks but wont start


Usually if no rpm signal, the vehicle won't start. Engine cranking, did you check for spark at the spark plugs? The fuel pressure you listed may have been the initial prime. It sounds like no injector pulse. The rpm signal comes from crank sensor. If your missing rpm signal, may thought is the crank sensor.
Were there any applicable trouble codes?

Apr 06, 2017 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Replaced spark plugs and now truck wont crank


explain more............ what kind of plugs, wont crank????? turn over or turn over and wont start, crank no fire???? changing spark plugs wont stop a truck from running.

Mar 06, 2010 | 2004 Ford F150

1 Answer

2001 f150 wont start change plugs and wires and now wont fire and wires are in correct order. can you help


Check your ignition fuse # 30, in the inside fuse box all the way on the right second from the bottom, check your coil and crank position sensor, these are responsible for spark, the crank sensor is bolted with 2 bolts next to the lower engine pulley, this is a magnetic pick up that triggers spark from the coil, if the crank sensor is good and you have no spark then the coil could be bad. Hope this helps, let me know.

Dec 14, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

F150 wont start


Change crank censer

May 28, 2009 | 1990 Ford F150

2 Answers

Car wont crank 1994 plymouth acclaim


Not sure what yor experiencing . Do you have crank no start or no crank no start? No crank no start is battery and cables issue. Crank no start is ignition , plugs, and fuel.

May 28, 2009 | 1991 Plymouth Acclaim

Not finding what you are looking for?
2005 Ford F-150 Logo

613 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...