Question about 1997 Dodge Intrepid

1 Answer

I need a diagram of the rear brakes of a 1997 Intrepid Chrysler-where can I get one>

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,826 Answers

If the following is not enough then maybe try Alldata.com which generally has more information, but it will cost: REMOVAL & INSTALLATION Chrysler Concorde, New Yorker, LHS Dodge Intrepid Eagle Vision

  1. Remove the rear wheels and brake drums.
  2. Remove the dust cap from the rear hub and bearing assembly.
  3. Remove the cotter pin, nut retainer and wave washer. Discard the old cotter pin.
  4. Remove the rear hub and bearing assembly retainer nut and washer. Remove the rear hub and bearing assembly from the spindle.
  5. Remove the automatic adjuster spring from the adjuster lever.
  6. Rotate the automatic adjuster starwheel enough so both shoes move out far enough to be free of the wheel cylinder boots.
  7. Disconnect the parking brake cable from the actuating lever. Disconnect parking brake cable one side at a time.
  8. Remove the both lower brake shoe to anchor springs.
  9. Remove the 2 brake shoe hold-down springs from the brake shoes.
  10. Remove the brake shoes, upper shoe-to-shoe return spring, automatic adjuster and automatic adjuster lever from the backing plate as an assembly.
  11. Separate the brake shoes from the automatic adjuster mechanism.
  12. Remove the brake shoe automatic adjuster lever from the leading brake shoe. To install:
  13. Thoroughly clean and dry the backing plate. To prepare the backing plate, lubricate the bosses, anchor pin and parking brake actuating lever pivot surface lightly with lithium based grease.
  14. Remove, clean and dry all parts still on the old shoes. Lubricate the starwheel shaft threads with anti-seize lubricant.
  15. Assemble both brake shoes, the top shoe to shoe return spring, automatic adjuster and automatic adjuster lever before mounting on vehicle. Make sure the ends of the automatic adjusters are positioned above the extruded pins in the webbing of the brake shoes prior to installation.
  16. Install the brake shoe assembly onto the brake support plate and install the hold-down springs.
  17. Install the lower anchor springs and reconnect the parking brake cable to the park brake lever of the trailing brake shoe.
  18. Rotate the serrated adjuster nut to remove the free-play from the adjuster assembly.
  19. Install the automatic adjuster lever spring on the lead brake shoe assembly and the automatic adjuster lever.
  20. Install the rear hub and bearing assembly. Install washer and retainer nut and torque to 124 ft. lbs. (168 Nm).
  21. Install the wave washer, nut retainer and a new cotter pin onto the spindle. Install dust cap.
  22. Adjust brake shoes so not to interfere with brake drum installation. Install the rear brake drum. NOTE: After installing the brake drums, pump the brake pedal several times to partially adjust the brake shoes. To verify proper operation of the self-adjusting parking brake, be sure that both rear brakes are not dragging when the parking brake pedal is released.
  23. Install the rear wheels and lug nuts. Torque the lug nuts, in a star pattern sequence, to 95 ft. lbs. (129 Nm).
  24. Road test the vehicle. The automatic adjusters will continue brake adjustment during the road test of the vehicle.
I need a diagram of the rear brakes of  a 1997 - prev.gif next.gif

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

REAR BRAKE UPGRADE TO DISC 1997 CHRYSLER VOYAGER


That's an expensive job. You will need new spindles, backing plates, rotors, new master cylinder and a pressure equalizer. You may also need to install new brake lines for the increased volume of fluid. Usually costs around 1000 dollars just for parts. Rear disc brakes are mostly for sports cars. About 80% of a cars braking power comes from the front. Disc brakes aren't necessary for the rear.

Jan 08, 2015 | Chrysler Cars & Trucks

1 Answer

I need to reassemble driver side rear brakes on a 97 dodge intrepid


Perhaps if you post some photos of the springs, clips, and other hardware, as well as the brake assembly itself, I could probably be able to guide you. However, I don't know what it looks like, so I have nothing to go on.

Nov 03, 2011 | 1997 Dodge Intrepid

1 Answer

Is there a way to adjust the parking parking brake in 1997 intrepid?If so where? I have 1997 intrepid with rear drum breaks brand new pads and the parking park won't grab enough to stop the car in motion,...


there is an adjustment screw on the bottom of the drum try tightening is little by little. you want it to grab when engaged. it is much harder to stop the car while moving than setting still.

Jul 11, 2010 | 1997 Dodge Intrepid

1 Answer

Need a diagram of the firing order for 97 intrepid 3.5l


Looking from the front of the car. the passenger side is cyl 1, 3, 5, and the drivers side is 2, 4, 6. The coil pack front row is, 6,4,2. and the rear row is 3,1,5 The firing order is 123456

Dec 18, 2009 | 1997 Dodge Intrepid

2 Answers

I have a 1997 Chrysler Intrepid 3.3 v6. The rear defogger doesn't work. I change the Heater/Ac Control unit.


check the fuses and also check the defog grid, ( lines across back window) for broken lines, start there,

Nov 06, 2009 | 1997 Dodge Intrepid

1 Answer

Brakes need to be replaced


there is a bleed valve on the backside of your caliper
under the brake hose. 2. on the inside of your rotors
there is a minimum thickness. if you have a micrometer mic them yourself. if no take to local parts store they will be glad to measure them for you.

hope2help shack

Apr 16, 2009 | 1997 Dodge Intrepid

1 Answer

I have a 1997 dodge intrepid my brake lights are not working but the tail lights are so which bulb is the brake light , the one one on right or left.


first of all do you have a third brake light and does it work???? you could have a bad brake light switch turn on the head lights check all rear lamps then put on the 4 way flashers and check the bulbs the ones that dont light should be the brake lights or replace the tail lights they should be double fillament

Jan 29, 2009 | 1997 Dodge Intrepid

1 Answer

WHERE COULD I FIND THE THERMOSTAT ON 1999 CHRYSLER INTREPID


under the alternator on the side of the block

Oct 01, 2008 | 1999 Dodge Intrepid

1 Answer

1997 Dodge Intrepid rear brake lights


check the switch by the brake pedal. This is what turns on the brake lights.

Jun 28, 2008 | 1997 Dodge Intrepid

Not finding what you are looking for?
1997 Dodge Intrepid Logo

1,847 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...