Question about 2002 Chevrolet TrailBlazer

1 Answer

What is the part number for the 2002 trailblazer spare tire hoist

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 1,311 Answers

15247311

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get spare tire hoist to tighten under truck


Hoist assembly needs to taken down and inspected for kinked cable and lubricated. If cable is kinked or frayed, entire assembly needs to be replaced.

Jun 19, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

I can't get the spare tire out of the rack? 2004 yukon


  • Rotate the hoist shaft counterclockwise in order to lower the spare tire to the ground. Continue to rotate the shaft until the spare tire can be pulled out from under the vehicle and removed. If the spare tire does not lower to the ground, the secondary latch is engaged causing the tire not to lower.
  • If the secondary latch is engaged and the cable end is visible, perform the following procedure: 3.1. Tighten the cable by rotating the hoist shaft clockwise until you hear 2 clicks or feel it skip twice. You cannot overtighten the cable. 3.2. Loosen the cable by rotating the hoist shaft counterclockwise 3 or 4 turns. 3.3. If the spare tire can be lowered, repeat steps 1 and 2 to see if the spare tire can be removed. 3.4. If the spare tire cannot be lowered, rotate the hoist shaft counterclockwise until approximately 15 cm (6 in) of cable is exposed. 3.5. Raise and support the vehicle. 3.6. Place a transmission jack, or equivalent, under the spare tire. 3.7. Position the center of the transmission jack under the secondary latch release button at the center of the spare tire. Arrange the arms of the transmission jack so they will support the tire after it has been released. 3.8. Raise the jack until the spare tire stops moving upward and is firmly held in place, releasing the secondary latch. 3.9. Lower the tire. If the spare tire is hanging by the cable, rotate the hoist shaft counterclockwise until the tire is low enough to remove.
  • Feb 28, 2010 | 2009 GMC Yukon XL

    2 Answers

    2005 CHEV SILVERADO SPARE TIRE HOIST JAMMED.


    put weight on it or have someone pull down while turning release need tension so cable can come down

    Jan 25, 2010 | 2002 Chevrolet TrailBlazer

    1 Answer

    The cable for the spare tire on my 2006 1500 works fine (it's all the way down) but the retainer did not lower at all so I cannot pick up the spare tire. Can anyone help? Thanks


    1. Rotate the hoist shaft counterclockwise until approximately 15 cm (6 in) of cable (1) is exposed.
    2. While holding the latch pin (3), fully depress the latch button (2) and release the secondary latch from the hoist assembly. Some side-to-side and/or up-and-down movement may be necessary to disengage the latch mechanism.
    3. Continue rotating the hoist shaft counterclockwise in order to lower the hoist the rest of the way.
    4. If this does not release the secondary latch, the spare tire hoist will need to be replaced. See the following procedure.
    Important: If the spare tire hoist has been fully raised without a spare tire in place, the secondary latch mechanism may have become engaged. If this has occurred the hoist will not lower and the following steps will need to be followed:

    Nov 01, 2009 | 2005 Chevrolet Silverado

    1 Answer

    02 chevy trailblazer Tire Mount/Hoist


    The best place to go and get one is the Salvage Yard, it's will cost you $25,00 if you pull it off the scrap trailblazer. Or you can have them pull one out for you but will cost more, Good luck and hope this helps. 

    Jul 04, 2009 | Chevrolet TrailBlazer Cars & Trucks

    1 Answer

    Replacing Chevy Trailblazer Spare tire mount/hoist.


    Check out item 330335042615 on Ebay...
    it''s the whole jack, handle etc... 50 bucks!
    Tah dah!

    Jun 09, 2009 | 2002 Chevrolet TrailBlazer

    3 Answers

    Spare tire won't release.


    This is the worst GM engineering i have ever seen !!!! The secondary locking mech. rust itself in the locked position on will NOT allow the tire to lower. After lowering the tire down approx. 2-4" the saftey lock is still engaged. I was able to reach above the tire and remove the bolt holding the hoist in place. {15 mm wrench}. Keep a floor jack under the tire to support it and as not to fall on your head. After removing the bolt the hoist is hooked on the frame member and must be lifted off to remove. Once you get it on the garage floor it is possible to disengage the locking mech. with a few tools and a big hammer. Good luck This should be a Recall

    May 20, 2009 | 2005 Chevrolet Silverado

    1 Answer

    Tire hoist will not lift back up.


    no the hoist must be replaced, they are famous for this, all trucks use the same one.

    May 12, 2009 | 2002 Chevrolet TrailBlazer

    5 Answers

    Hoist to lower spare tire does not work.


    Same thing happened to me on my 2002 trailblazer. The last few wraps of the cable was corroded to the point that it wouldn't unwind with the tool supplied. First thing to do is cut the crimped end of the cable off with a grinder or cut off wheel but don't forget to support the spare. This will get the spare out of your way then simply take out the 3 mounting bolts for the cable hoist. At this point you could buy a new cable hoist from the dealer and install it yourself or you might be able to do what I did. I managed to pull and remove about a foot of the rusted cable, slide the rectangular metal piece, that actually holds the spare at the center of the wheel, back on the cable and attach a 1/4" cable clamp to the end of the cable which of course must be in good condition. There should still be enough cable to re-attach your spare to it and hoist it back up. Don't forget to lube things up so it won't happen again. Good luck. (buying a new one sounds better, doesn't it?)
    mikethemedic in Hawley,Pa.

    Jan 23, 2009 | 2002 Chevrolet TrailBlazer

    Not finding what you are looking for?
    2002 Chevrolet TrailBlazer Logo

    Related Topics:

    201 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8522 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...