Question about Toyota Prius
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: electric door mirror repair
Hi.. It was an Avensis not a camry. Unfortunately the Avenssi was not on the drop down list.
Basically The bits on the back of the galss mirror did not seem to match up with the backplate. After trying several different ways I did the following.
1. remove the black casing this leaves a cover with several holes in it.
2 slide the lugs on the mirror furthest away from the door into the slot just to the left of the round circular backplte.
3 put a screwdriver through the rear housing hole near to the door. If you look through you will see a "lug sitting on a black lip. Use the screwdriver to force the lip away from the car. the lug will slip down the side of it. release the lip and it will secure the mirror.
Note the mirror does not seem to fit 100% correctly so I've added some tape for extra security.
Posted on May 13, 2009
SOURCE: Indicator on wing mirror
Have you tried taking off the cover to see if the indicator cover is part of the entire wing mirror cover. I think it might all be part of the same cover. The Haynes manual may be able to help more.
Posted on Oct 19, 2008
SOURCE: VW indicator unit on wing mirror
Ok very carefully pull off the mirrior blade. The mirrior blade is clipped but EXTEMELY fragile and will break if forced. From there remove the 2 heated blade wires. The cover is also clipped as you will notice after that is removed. You have to pry with a plastic tip between the cover and hosing near the body of the car while pulling the clips in the housing you see to lift the cover straight up. Once this is done you'll need a t-10 torx screwdriver to remove the lower portion. These screws are when you're looking straight down. With this assembly off you can access the 2 other little screws holding the flasher to the bottom cover. Remove the wires and the little clip and there you go. Installation is reverse.
Posted on Nov 01, 2008
Tips for a great answer:
Mar 21, 2016 | 2007 Toyota avensis 1.6
Nov 25, 2015 | Toyota Cars & Trucks
Nov 22, 2015 | 2006 Toyota Avensis 2.2
Jan 04, 2015 | 2007 Toyota avensis 1.6
Jan 02, 2015 | 2007 Toyota avensis 1.6
Apr 09, 2014 | 2007 Toyota avensis 1.6
Sep 09, 2012 | 2005 Toyota Avensis 2.0
Jun 30, 2009 | 2003 Toyota Corolla
May 12, 2009 | Toyota Camry Cars & Trucks
974 people viewed this question
Usually answered in minutes!