Question about 2000 Dodge Durango

Open Question

2000 DODGE DURANGO SLT, REAR HATCH WON'T OPEN. SEEMS TO UNLOCK AND LOCK BUT HANDLE WON'T ALLOW ME TO OPEN THE HATCH.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ghost4548
  • 776 Answers

SOURCE: handle on rear hatch door broke off.how can i open hatch door until i can get a new handle?

you don't. take it into a Hyndai Dealership and have the handle repaired/replaced. The rear hatch panel/cover has to be removed (from inside the vehicle) to access the hatch latch and open the door.. from that point the handle can be replaced/repaired.

Posted on May 27, 2009

Ad
alicantecoli
  • 22265 Answers

SOURCE: My rear door, hatch, won't open. The handle is

get a machanic to have a look because it sounds like either something is broken or most likely its just loose

Posted on Jun 22, 2009

  • 5 Answers

SOURCE: trying to find out the speaker sizes for the back

Consult the website, crutchfield.com Go to the "Outfit my Car" section. Enter the vehicle info about your Durango to get a listing of the speaker sizes.

Posted on Jul 09, 2009

  • 82 Answers

SOURCE: 2000 dodge durango driver side window problem

durangos have many problems with the windows motors and regulators, I know for personal experience , because I have one, ...when you try rolling the windows down do you hear any noise coming from inside the door..if so.. the cable is busted ..you will need the windows regulator, if no, is probably the motor..you will have to check for power and ground right at the motor connector...if power and ground are present, then you need a motor ....in mine ,I pull the motor and cleaned , and they have been fine for more than a year, I starter with one and them had to do the same to all of them..hope this help

Posted on Aug 02, 2009

michigan man
  • 3533 Answers

SOURCE: power lock does not open rear hatch 2004 Dodge

you may need to replace the power door actuator on that door give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local Dodge dealership in the parts department and they be able to print you off pictures and diagrams showing you how the door comes a part wish you the best of luck Michigan Man.

Posted on Nov 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix rear hatch lock that won't release


Although the liftgate has no inside release mechanism,
the liftgate trim panel includes an opening with a
snap-in cap that provides access to release the latch in
the event of an electrical system malfunction.

It is possible that the handle is stuck in the "open position" which will not allow the hatch to unlock.

Apr 28, 2016 | 2010 Dodge Caliber

1 Answer

How do you open the back door (no manual)


Rear hatch is locked or unlocked with a key. (if equipped) • To open the rear hatch, insert the key into the lock, turn it to the unlock position and pull up the rear hatch by pressing the handle (DOOR). You can also lock/unlock the latch (but not release it) with the central door lock system. • If unlocked, the rear hatch can be opened by pressing the handle (DOOR) and pulling the hatch up. • To close the rear hatch, lower and push down the rear hatch firmly. Make sure that the rear hatch is securely latched.

Apr 12, 2016 | 2009 Kia Sportage

1 Answer

1999 dodge durango rear hatch wont shut


pull handle open and take a screwdriver and open the latch. still not latching ? try spraying silicone lubricant or wd-40 on latch

Sep 25, 2012 | 1999 Dodge Durango

1 Answer

How do I remove the tailgate trim from 1998 durango? My tailgate will not open, not with a key, or automatic lock it just won't open. Thinking it needs a new actuator, but i can't access it to...


If you can get the hatch unlocked and opened, you can remove the interior panel and unplug the factory powered door lock. This will not do anything to your security systems. The only down fall is it will only open with the key. If the hatch doesn't work with the key either, I would say you need a new lock assembly. I have shaved my door handles and have removed the power door lock, so I know it will work just fine ( I depend solely on my shave door handle system and my security system (Viper) to access my truck) - from Dakota-Durango.com Lots of info there..I agree with losing the power opening option if you have it...I am renewing a 98 Durango and its keys all the way...needed new lift struts for the rear hatch tho..(that thing is very heavy...I HAD to have help installing the new struts, I had held it up with my skull to remove the worn ones....definitely use E-Bay for parts search and full synth oil w/Lucas synth additive will make the motor happy.Hope things work out....

Oct 29, 2011 | 1998 Dodge Durango

1 Answer

2005 dodge durango rear hatch will not unlock to open


I own a 04 durango and the door lock actuator froze up internally and I could not open the rear hatch. After hours of research on my computer nothing seemed to fix the problem. I eventually figured it out myself. You must pull the screws out of the molding on the inside of the rear door. You can now pull the molding toward you and look down at the actuator and latch. You can pull on the molding quite a bit if necessary. I never broke mine and I was pretty agressive with it. Now, on top of the whole mechanism is the lock actuator. There should be a white plastic lever sticking out towards the driver side. If you can slide it from back to forward "forward is front of vehicle", the lock should be working. If not your door is not unlocking. My durango had 3 Torx screws on top of the actuator. Remove them. This will take the actuator off of the latch. Now that the actuator is not binding or holding the lock from moving, again try to move the white plastic lever towards front of vehicle. It should click and you should be able to open the door.

Oct 12, 2011 | 2005 Dodge Durango

1 Answer

My 2006 dodge durango rear hatch door will not open, I am looking for a manual way to open the rear hatch? and a solution to this problem. also looking for a detailed manual for the fuse box.as I am...


I own a 04 durango and the door lock actuator froze up internally and I could not open the rear hatch. After hours of research on my computer nothing seemed to fix the problem. I eventually figured it out myself. You must pull the screws out of the molding on the inside of the rear door. You can now pull the molding toward you and look down at the actuator and latch. You can pull on the molding quite a bit if necessary. I never broke mine and I was pretty agressive with it. Now, on top of the whole mechanism is the lock actuator. There should be a white plastic lever sticking out towards the driver side. If you can slide it from back to forward "forward is front of vehicle", the lock should be working. If not your door is not unlocking. My durango had 3 Torx screws on top of the actuator. Remove them. This will take the actuator off of the latch. Now that the actuator is not binding or holding the lock from moving, again try to move the white plastic lever towards front of vehicle. It should click and you should be able to open the door.

Jun 12, 2011 | 2004 Dodge Durango

1 Answer

Glove compartment door on my 2000 Dodge Durango SLT won't open


What models of dodge are interchangeable with a 2000 Dakota glove door latch?

Sep 19, 2009 | Dodge Durango Cars & Trucks

1 Answer

2005 dodge durango rear hatch is down and will not open


I own a 04 durango and the door lock actuator froze up internally and I could not open the rear hatch. After hours of research on my computer nothing seemed to fix the problem. I eventually figured it out myself. You must pull the screws out of the molding on the inside of the rear door. You can now pull the molding toward you and look down at the actuator and latch. You can pull on the molding quite a bit if necessary. I never broke mine and I was pretty agressive with it. Now, on top of the whole mechanism is the lock actuator. There should be a white plastic lever sticking out towards the driver side. If you can slide it from back to forward "forward is front of vehicle", the lock should be working. If not your door is not unlocking. My durango had 3 Torx screws on top of the actuator. Remove them. This will take the actuator off of the latch. Now that the actuator is not binding or holding the lock from moving, again try to move the white plastic lever towards front of vehicle. It should click and you should be able to open the door.

Feb 08, 2009 | 1995 Subaru Legacy

Not finding what you are looking for?
2000 Dodge Durango Logo

Related Topics:

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...