Question about 2002 Dodge Intrepid

1 Answer

Just replaced an engine and can't get fire to plugs motor turns but won't crank

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 150 Answers

Most likely it is the anti theft module. The computer thinks the car has been stolen. The only solution I have been able to find is to tow it to a dealer. They have a special computer that resets that and programs the module to match your existing keys. Make sure you keep the door lock remote or spare key in your pocket because the computer will lock the doors without warning and if the keys are in the ignition you are screwed.

Posted on Sep 03, 2010

  • shayla thomas Oct 17, 2012

    about how much did it cost at the dealer

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car won't start 2003 Dodge Stratus sxt coupe cranks but won't start what could b the problem? I tried spraying starting fluid in the air system but it still won't start!


i would check and see if spark pluges are firing. you can take one out and plug into spark plug wire then let the bottom of the plug sit on engine and get someone to try to start while you look at the plug to see if there is any fire. if you have no fire or fuel it would be the crankshaft sencer. it could be the timing belt but the motor would sound different turning over then it used to.

Dec 22, 2012 | Cars & Trucks

1 Answer

91 Cherokee will crank but won't fire. Replaced


how much is the RPM showing in the datatlogger while cranking?

Dec 03, 2012 | Cars & Trucks

1 Answer

Not cranking and not firing


If the engine cranks, but won't start, and you are not getting spark to the plugs, you need to find out if you have voltage to the coils and module. Is the check engine light on ?

Aug 15, 2012 | 1992 Pontiac Grand Prix

1 Answer

2000 Toyota Sienna won't start. No spark


I parked my 04 sienna and cut it off 2 hrs latter I tried to start it and would not crank starter was fried replaced with new one now it crank but will not start I tried starting fluid same thing cecked fire to plugs fire once and quit until you turn key agin fire once agin replaced cam and crank senser no start what am I missing anyone thank ,lost..

May 30, 2012 | Toyota Sienna Cars & Trucks

1 Answer

My 1996 850 volvo wont start the engine turns over but wont crank


ok, turning over and cranking are the same thing, what your saying is it won't fire, so , 2 things make a motor fire, electric and fuel, so starting with the easiest remedy , remove the distributor cap, and inspect the rotor and connection points that are inside the cap, check for any debris built up , sometimes you can clean them good enough to get the car to fire up, if it does , normally you would replace them , ( not that expensive) remove the number one cylinder spark plug, and once out put the spark plug wire back on it, ( your going to need help with this step) with insulated pliers , hold the plug and place the bottom of the plug against a grounding point (any bolt on the motor will do,, but try and keep it away from the carb as its Hopefully going to spark) have someone try and turn the car over as if to start it, look for spark at the end of the plug, if you have spark,, replace the plug and try and start the car , if it won't,, move onto the fuel problem, you need to make sure that the car is getting fuel, remove the fuel line to the carb turn the key for a second, you should see fuel splashing out, if yes ,, you should be able to start the car , if no,, check the fuel filter first , then the fuel pump,

Jul 22, 2011 | Volvo 850 Cars & Trucks

1 Answer

My BMW 520i starts up when cold but when it's warmed up and I turn engine off it won't start it's a 1997 straight six tiptronic whats causing this?


If the engine cranks but fails to fire, the car may be flooding due to a failed temperature sensor. There are several, but the most likely problem would be the water temperature sensor.
If the engine fails to crank when hot, the starter motor is failing and will need to be replaced.

Jun 23, 2011 | BMW 525 Cars & Trucks

1 Answer

Have replaced the starter solenoid, spark plugs, plug wires, fuel filter, air filter, water pump and battery all within the last two months. When the truck gets hot it will not crank. Has electrical power,...


If you haven't already done so, replace the distributor cap and rotor. There is most likely corrosion inside the cap that is causing a crossfire condition.

This is a common problem on that engine.

Don't know why being hot would aggravate it, but start with the cap.

Jun 14, 2011 | 1990 Chevrolet Suburban

5 Answers

Truck wont crank. we have put new distributor cap, rotor button, coil pack, plugs, wires, and fuel pump. we also checked our firing order.


you said you repl dist cap that means you don't have a crank sensor you have electronic ing module. remove your elec ing module have it tested most auto parts stores could test your module, or check your coil at the neg terminal. should have power. if not you lost your primary volt from your batt.your secondary power is coming from your electronic ing module from the module to the pos terminal on the coil, when the eng cranks,from the coil to the dist cap , from the dist cap center to the rotor then out to the plugs,this all happen pervided the timing belt or timing chain is ok. the cumbustion chainber needs 3 things , thats fuel, air, and spark.

Apr 17, 2011 | 1996 Chevrolet K1500

4 Answers

Motor cranks but won,t start


I could barely understand your problem because you had no periods and your apostrophies were commas.
Sounds like you have a bad distributor. If you have the coil pack assembly, then you need to make sure the coil packs or control module under it are working

Nov 28, 2008 | 1992 Chevrolet Cavalier

Not finding what you are looking for?
2002 Dodge Intrepid Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...