Question about 2006 Kia Amanti

1 Answer

Very bad gas fumes inside car and will stall.I took it and had the diagnostic ran on it and it came out it was the gas cap changed gas cap and did not fix the problem

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 197 Answers

Have you contacted the guys who told you to get a new gas cap? Was a new gas cap a recall? It was on mine. It might be just old gas smell still in car. Does the car still stall? On my car the dealer said there was not a hole in my old gas cap to relieve vaccume pressure, it was a factory recall, but I never did have any trouble with it.

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The code P0422 per oBD diagnostic is evap emission control has little leak. Where is that evap emission control located?


you have something allowing the gas fumes to leak out of your emission system is what code po422 means if you replaced your gas cap and this code came back after resetting your check engine light then some where in the vent line between the fuel tank and the intake there is a leak that is allowing the gas tank to depressurize which will turn on the light and cause your cars ecm or computer to go into (limp mode) this is a preset program which allows the driveline to operate at a non optimum setting or diagnostic setting meaning it will get lousy gas mileage until repairs are made and the problem is fixed as far as being safe to drive it could be very dangerous depending on how bad the leak is and weather the car has exhaust leaks also you are dealing with gas fumes closed in say like parking in a garage where these fumes can build up it can be very dangerous if enough fumes build up in such a instance out in the open not very bad at all

Sep 01, 2014 | Cars & Trucks

1 Answer

Code comes of for leak evac the shop ran smoke and could not find a leak I got a new gas cap, I don't smell gas help?


Make sure the computer has been reset since changing the cap. Autozone, etc. will scan for free.

The smoke test should have caught the problem provided the shop looked at the gas tank too. There can be a problem in the electric solenoid valving for the canister which can be concealing a leak beyond the solenoid valving. If the solenoid is closing off the flow, then it can also close off the leak.

As for smelling gas, its the fumes which flow in these hoses, not raw gas. If the Vacuum system draws the fumes in, or if the leak is rearward, there is less of a chance of smelling the fumes. Rushing air from driving will dissipate many fumes.

Dec 23, 2013 | 2000 Ford Focus

1 Answer

Van won,t start montanasv6 did a diagnostic on it the c305 came up


Could be fuel pump or fuel relay, sound like you're not getting enough gas.

Nov 24, 2013 | 2005 Pontiac Montana SV6

1 Answer

The diagnostics module does not work. When my check engine light came on I took it several places but there was no power. All fuses are good and triple checked. I took it to a shop 3 weeks ago they ran...


the cigar lighter fuse usually powers the scan tool. If the light is on, take it back to the shop that did the gas cap repairs. there may be more to the leak than the gas cap.

Nov 30, 2010 | 2005 Chevrolet Cobalt

2 Answers

2000 Dodge Intrepid with PO455 code and stalling.


A code 455 most likely one or more of the following has happened
a loose or bad gas cap
a non-conforming gas cap
other leaks or damage pieces in the evap system

Inspect the evap system for cracks or breaks in lines listen for vacume leaks or strong gas fume smell and fix all lines you find that are damaged ..I know you say you put a new gas cap but make sure it a conforming cap..Hope this helps

Nov 14, 2009 | 2000 Dodge Intrepid

1 Answer

Service light and stalling


Replace crank sensor,cheapest 1st,if this does not fix problem most probably fuel pump.Auto trans on this car requires a rack,has plug on bottom side.

Jun 15, 2009 | 2000 Saturn Ls 4dr Sedan

1 Answer

Service light and sometimes stalling


if you had sa recent oil change you need to reset your sensor,try changing the inline fuel filter as well.hope this help's

Jun 15, 2009 | 2000 Saturn Ls 4dr Sedan

3 Answers

Stalls while Driving


that'll b air intake system or not enough gas going 2 the engine so it stalls or blocked gas lines

Sep 17, 2008 | 1990 Toyota Celica

Not finding what you are looking for?
2006 Kia Amanti Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...