Question about 1997 Nissan Sentra

1 Answer

Car starts good idle good but cuts off when gear is put in drive car also cuts off when the a/c is on but when it is warmed up drives good ...please help thanks {nissan b14 ga15 }

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 150 Answers

Try unhooking one of the battery cables and leave it off for at least 20 minutes. When you hook it back up the computers should re-boot. That has solved problems for me with heater, interior lites, power windows, AC, day time running lites, power mirrors, CD player, and wipers on GM autos and S-10 PU and Dodge trucks. None of the switches are connected to the device they control anymore. The switch tells the computer to open the window and the computer send a signal to the window motor. When the computer gets confused strange things will happen or not happen. Of course you may have to re-set your radio stations.

If that doesn't fix it, then check you idle speed adjustment. Take it to Advance Auto parts and they will read out the computer error codes for you and that will tell you what the computer thinks the problem is.

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car shuts off while in drive


Have the CPU reset using the fault code reader.

May 04, 2013 | Mercury Cougar Cars & Trucks

1 Answer

Car runs fine in park and cuts off in drive


Don't know cars - but it might not be idling fast enough to make the gear change. Idle reset needed maybe?

Feb 14, 2013 | Cars & Trucks

1 Answer

1996 mercedes c280 dies when put in drive


Engine stalls or RPM fluctuates at idle up and down or dies near idle.

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault code as well as the cleaning procedure. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Oct 15, 2012 | 1996 Mercedes-Benz C-Class

1 Answer

My car slams when put into drive. is it the idle


Yes, sounds like the idle speed is too high. If you keep driving like that, you will fry the torque converter / turbine. Since idle is computer controlled, you will have to take it for service tune up. There is one possibility that the rich, high rpm idle used for cold start is not disengaging properly after the engine warms up. Air conditioning will raise the idle speed by a couple hundred rpm, so avoid using it until you have the problem fixed. BTW.....warm engine rpm in idle, and neutral should be around 700-800. Anything over 900-1100 will result in a hard shift into 1st gear and dragging at stop lights.

Feb 16, 2010 | 2002 Chevrolet Malibu

1 Answer

Tranny causes engine to stall when tranny warms up


if it feels like your driving a standard transmission ,and "you came to a stop light without pushing clutch in"
that will be the torque convertor lock up,

Jan 12, 2010 | 1995 Pontiac Sunfire

1 Answer

My car will start and then after a minute or two of running, the car will idle down and cut off but I can start it right up again and still get the same results. Whenever I put it into gear to drive it...


First scan the PCM for trouble codes using a hand held engine scanner, Then repair codes by replacing failed sensor as needed.  If no codes are present try replacing the idle air control motor. 
Auto Zone will scan your car for codes for free so you know what your going to have to replace and they do have a how to do it your self instructions to what your going to replace.
Good luck and hope this helps

Apr 20, 2009 | 1997 Pontiac Grand Am

1 Answer

Idle and gear shifting 1987 celica automatic


I would suggest hat you replace the timing belt. The noise that you hear is the belt.

Mar 05, 2009 | 1987 Toyota Celica

Not finding what you are looking for?
1997 Nissan Sentra Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...