Question about 2006 Mercury Grand Marquis

Open Question

P0191 Error Code 2006 Grand Marquis\r\nFuel Rail Sensor A Circuit\r\nRange/Performance The car seems like is starving for gas at different times, speeds, and rpms. I have replaced fuel filter, fuel pump and and..

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1874 Answers

SOURCE: 2006 Ford F-150 5.4 engine. code

2006 Ford F-150 5.4 engine: code P0191 fuel rail pressure sensor circuit range / performance

First step is to change the fuel filter and test the car. If the problem still occurs: The fuel pump driver module was corroded through from salt and was malfunctioning. Bought a new one and runs great. Problem fixed. See pictures below:

This is why salt destroys cars.

Posted on Dec 16, 2010

  • 1 Answer

SOURCE: 1998 Mercury Grand Marquis Fuel Pump Replacement

you can try just resetting the fuel pump switch located in the car

the switch is originally in the car for in case of an accident, however, if changed, chances are you also have to reset it

in my 98 grand marquis, the switch is on the left side of the trunk

Posted on Mar 19, 2009

  • 78267 Answers

SOURCE: engine light on 2003 Grand Marquis code p 2197 "lean"

the very 1st thing u do is have the trouble code checked that turned on the light, there are well over 200 possible reasons for a check engine light, a fuel filter is not one of them.

Posted on May 26, 2009

  • 186 Answers

SOURCE: 2001 mercury grand marquis. Engine stutters or

Start car and use a squirt bottle of water to wet the wires and coil, if you see it spark or run rough one or both are bad, repair the wires first as they are more common.

Posted on Aug 02, 2009

  • 101 Answers

SOURCE: Fuel issue on 2001 Grand Marquis

most cars have an oil pressure sensor that is tied into the fuel system that will shut off fuel pump if oil pressure is low. Ford is famous for having a yellow fuel pump cut off switch that activates in a collision - you need to locate and check this 1st

Posted on Oct 18, 2009

Testimonial: "Oil pressure during cranking? This come off the sender switch? How to bypass to "test" if engine will start? "

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have replaced the maf sensor,the fuel pressure sensor and the fuel pump, not sure what else to do. The engine light stays on and after some warmup, difficult to start. Thanks for your time.

Jan 18, 2017 | Cars & Trucks

1 Answer

My 2007 Toyota isis code P0191

Anon, Trouble code P0191, You may need a good tech. with scan tool to read and test system.
  • Fuel Rail Pressure Sensor Circuit Range/Performance,computer see's signal from the Fuel Rail Pressure Sensor and/or its circuit is sending erratic readings, indicating a fuel pressure condition that is abnormal. Problems could be out of gas, leaking fuel, faulty fuel pressure sensor, bad wire or plug in circuit,fuel pressure regulator, the fuel pump could be faulty also. Check the attached links,instruction and guides, Good luck
    "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
P0191 OBD II Trouble Code

P0191 Fuel Rail Pressure Sensor Circuit Range Performance

RAV4 2001 Trouble Code p0191 probable solution Toyota Nation Forum Toyota...

code P0191 2007 Toyota Google Search

May 03, 2016 | Toyota Cars & Trucks

1 Answer

Which of the four probable causes for DTC P0191 is most likely?

P0191 - Fuel Rail Pressure Sensor Circuit Performance (FRP) The comprehensive component monitor (CCM) monitors the FRP pressure for acceptable fuel pressure. The test fails when the fuel pressure falls below or exceeds a minimum/maximum calibrated value for a calibrated period of time. High fuel pressure.
Low fuel pressure.
Damaged FRP sensor.
Excessive resistance in circuit.
Low or no fuel.
A FRP PID value during KOER of 138 kpa (20 psi) and 413 kpa (60 psi) for gasoline or 586 kpa (85 psi) and 725 kpa (105 psi) for natural gas vehicles (NG) is acceptable. You will have to check these items to find the cause of the code. no short cuts.

Sep 02, 2015 | 2003 Ford Explorer Sport XLT

1 Answer

I have a 2006 Ford escape need help repairing intermitting P0191 code problems

P0191 - Fuel Rail Pressure Sensor A Circuit Range/Performance , Description: The comprehensive component monitor (CCM) checks the fuel rail pressure (FRP) sensor for an acceptable fuel pressure. The test fails when the fuel pressure falls below or exceeds a minimum/maximum calibrated value for a calibrated period of time. Possible Causes:
  • High fuel pressure
  • Low fuel pressure
  • Damaged FRP sensor
  • Excessive resistance in the circuit
  • Vacuum leaks
  • Low or no fuel
Diagnostic Aids: A FRP PID value during key ON, engine running of 138 kPa (20 psi) to 413 kPa (60 psi) is acceptable. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to Pinpoint Test DD .

May 09, 2015 | 2006 Ford Escape

2 Answers

Codes P0191,P069E

P0191 is injector pressure sensor system performance. Nothing on the other code with the letter mixed in. I would erase it and see if it comes back.

Apr 14, 2015 | 2007 Chevrolet Chevrolet Silverado 1500

1 Answer

P0191 code - Intermittent stall - 2006 Ford Explorer 4.6

Sorry but you should take it to the dealer

Apr 18, 2017 | Cars & Trucks

1 Answer

2006 ford explorer p0191 intermittent stall

P0191 Fuel Rail Pressure Sensor Circuit Range/Performance
galletto 2

Mar 05, 2013 | Ford Explorer Cars & Trucks

1 Answer

Check engine light

Go here and it will tell you how to get your codes. Actually on an 06 you can just turn the ignition on and off 3 times (dont crank the engine) and the codes will show up on your odometer. But here are all the codes. PS you can get a manual on for free too.

P0191 Fuel Rail Pressure Sensor Circuit Performance

May 04, 2009 | 2006 Dodge Ram

Not finding what you are looking for?
2006 Mercury Grand Marquis Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

78267 Answers


Level 3 Expert

5655 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides