Question about 1995 Toyota Camry

1 Answer

Failed inspection because when I pull the parking brake-the brake warning light on the dash does not come on. I replacedthe switch and it still won't come on. All fuses good.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 31 Answers

Have you checked to see if the bulb is good

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lites will not turn off, where and how do I replace the sensor


My brake lights won't turn off Help!!!!! - Club Lexus Forums

www.clublexus.com/.../592044-my-brake-lights-won-t-turn-off-help.ht...
Sep 13, 2011 - Join Date: Oct 2010 ... there is a switch on the brake pedal that operates the brake lights, ... take a look. my hope is it helps people get into their Bible where the Holy Spirit can teach them the REAL truth, not my words, which are .... 400/ 300 Classifieds (98-05), RX350 / 330/ 300 / 400H / 450H Classifieds ...

Rear Brake Light Dash Warning Won't Turn Off - Club Lexus Forums

www.clublexus.com/.../468853-rear-brake-light-dash-warning-won-t-tur...
Dec 9, 2009 - Rear Brake Light Dash Warning Won't Turn Off SC- 1st Gen (1992-2000) ... Do you have the correct tail lights for your model year? Do you a ...

[PDF]List of Warning/Indicator Lights - Lexus Drivers


Jan 30, 2016 | 2010 Lexus RX 350

1 Answer

Brake light won t turn off at dash fluid full


That light is also tied in with the parking brake,with the key and light on pull up on parking brake pedal to see if light will go off, assuming you have a good brake pedal & not a mushy feel then it's doing it's job telling you have a hydraulic issue in the system.The switch for the parking brake is mounted on the mechanism and a single wire to it,works off a cam with pedal pushed down switch grounds the circuit.

May 06, 2014 | Dodge Caravan Cars & Trucks

1 Answer

Parking Brake Light won't turn off, Cruise Control won't engage


Get down and look at parking brake assembly, If you see an electrical connector, unplug it, see if that helps? If it doesn't help or causes other issues just plug it back in.
Of course that isn't the proper fix. If something wrong with parking brake assembly, get it checked out.

Mar 07, 2017 | Ford Cars & Trucks

1 Answer

Constantly on dash brake warning light 2000 chevy venture. the emergency brake warning light on my 2000 chevy venture is constantly on. the rear brakes aren't sticking and the switch seems simple how...


Please also note that the low fluid level sensor in your brake master cylinder will also make this light come on. If the brake fluid is low in the master cylinder, you need to find out WHY! There is either an hydraulic leak in the system or the disc brake pads are worn VERY thin. Then again, the low fluid level sensor could be faulty.

There is also a difference in brake systems available in your vehicle. If you do not have a fluid level switch in you master cylinder, there will be a pressure differential switch mounted between the fluid lines just below the antilock brake module. If this switch is causing the brake light to come on, it is usually because of a fluid leak somewhere in the system. If the hydraulic pressure on one dide of the switch or the other drops for some reason, it will cause the piston in the switch to shift to the side and turn the switch on. Again, you vehicle may be equipped with one or the other - you simply have to look.

To find out if it is the low fluid level switch, the pressure differential switch` or the parking brake switch, just unplug each of the switches to see if the light goes out.

If it actually is the parking brake switch, it is usually because the parking brake lever assembly is malfunctioning or you may have a stuck forward cable that is not allowing the pedal to return to the full UP position. Parking brake lever/pedal assembly failures are pretty common. I have changed quite a few of them.

Oct 08, 2011 | 2000 Chevrolet Blazer

1 Answer

One day my brake light came on. I pulled over and checked my emergency brake and it was not applied. I had someone check my brakes and they said they were fine. How can I make this light go off?


are you talking about the light which warns you that the parking brake is on? if it is the parking brake, that light is turned on by a switch operated by the lever or pedal you push on or pull to set the brake. find that switch and replace it. it will be in the console with a pull lever type handle, or under the dash for a push pedal type parking brake.

the other brake light monitors the integrity of the brake system, it is also operated by a switch which screws into the system. i would check near the master cylinder.

Aug 31, 2011 | Chevrolet Lumina Cars & Trucks

1 Answer

MY WARNIND DASH PANEL BRAKE LIGHT WENT ON AND I CAN'T SHUT OFF THE WARNING CHIME OR SOUND1 HOW CAN I FIND FUSE OR DISCONECT THE WARNING SOUND. EVEN WHILE DRIVING IT IS STILL ON. THANK YOU *****


ello: First grab hold of the park brake pedal and pull it towards you, then open hood and visually make sure brake reservoir is full to the line, if either of the previous does not correct then you may have a failed park brake switch. Park brake switch is mounted on the park brake pedal assembly. If failed you should beable to unplug it and the light and buzzer should go off.

Jan 27, 2011 | 1995 Buick LeSabre

1 Answer

1994 Ford Taurus. Emergency Brake light on dash does not light up when E Brake is applied. It only lights up momentarily when car is started. It failed safety inspection because they said it was...


Yes it is true. and the light is there as a reminder so when you jump in the car you do not drive away with the park brake on. The park light switch needs to be replaced.Good Luck and have a good XMASS.

Dec 17, 2010 | 1994 Ford Taurus

1 Answer

There is a light on my dash it is a ! with a bunch of lines all around it. what is that light for?


According to the 2003 Ford TaurusOwners Manual:

"Brake system warning light: To confirm the brake system warning light is functional, it will
momentarily illuminate when the ignition is turned to the ON position when the engine is not running, or in a position between ON and START,
or by applying the parking brake when the ignition is turned to the ON position. If the brake system warning light does not illuminate at this
time, seek service immediately from your dealership. Illumination after releasing the parking brake indicates low brake fluid level and the brake
system should be inspected immediately by your servicing dealership."

In short, as your brake linings (pads and shoes) wear out, the brake fluid level in the reservoir goes down.

You're probably right at the point where the level gets low enough to turn on the warning only under specific circumstances (cornering? hard braking?).

You can top off the fluid for the short term, but you should have your brakes inspected fairly soon.

May 26, 2010 | 2003 Ford Taurus

1 Answer

My parking brake and drivers door warning lights stay on. Both work fine but the lights on dash won't go out.


The Parking brake light can be set on if the cable to the brake has become loose, or if it stuck on. Check first to make sure the parking brake pedal is released fully, sometimes it will need to be manually pulled back as the tension becomes les on the cable. The drivers dooradjar light is telling you that most likely the door switch on the front dash panel on the door jamb is not functioning, replacing the switch should certainly turn the light off.

Dec 13, 2009 | 1989 Buick Reatta

Not finding what you are looking for?
1995 Toyota Camry Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...