Question about Pontiac Montana SV6

1 Answer

How to put in new spark plugs for a pontiac montana sv6

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

Remove those dog bones (motor torque struts) that hang from the top of the radiator to the front side of the motor. Take them all the way off if you want. With those off , push the van forward ( while in park) and the motor will move forward a few inches for more clearance from the fire wall. Put a piece of wood( small 2X4) in between the fire wall and the valve cover to keep the car from rocking back. You can also block the wheels if someone else can keep the car from rocking back. If the wires have never been off, they will most likely break. There isn't enough room or long enough arm to get them from the bottom of the van. The plugs and plug boots sit deep in the valley between the exhaust manifold , I woed be taping the extension and spark plug socket together so they would not separate after I got the plugs back in. Remember at a time every time.

Posted on Sep 03, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Spark wires/Coil ?????

They are COIL PACKS... No Spark Plug Wires

Jul 20, 2014 | 2006 Pontiac Montana SV6

1 Answer


On this website you find fuse box diagram for Pontiac Montana SV6 2005 - 2006

Pontiac Montana SV6 2005 2006 fuse box diagram Auto Genius

Mar 02, 2013 | 2006 Pontiac Montana SV6

1 Answer

Pontiac Montana SV6 engine chugs at 80 Kms

It is usually coming from the spark plug wires( leak spark). Spark to ground or piece of metal.
To find out exactly take an empty spray bottle fill her up with water and add 2 tablespoons of salt. With the engine running a light spray of the mix on spark plug wires you will see the spark leak and proof the spark plug wires have a defect. if so replace all spark plug wires that should solve your problem.

Hope it helps.

Feb 23, 2018 | 2006 Pontiac Montana SV6

1 Answer

Where 2005 Pontiac Montana SV6 heater fuse in the box

On this website (link below) you find fuse box diagram and description for Pontiac Montana Sv6 (2005 - 2006)

Pontiac Montana SV6 2005 2006 fuse box diagram Auto Genius

Feb 01, 2013 | Pontiac Montana SV6 Cars & Trucks

1 Answer

I need a spare tire lift for 2005 pontiac montana sv6 ??

It's not safe to put on a spare tire meant for one car onto another car, even if they do fit. ----------------------------------------------------------------------------------------
super vag k+can

Jan 07, 2013 | 2005 Pontiac Montana SV6

1 Answer

How to replace Spark plugs on 2005 Pontiac Montana Sv6? Thanks

Okay, this is a fun job, the front plugs are easy, the back plugs are a littlle more challenging, I ran my van up on ramps, then slid under and you can reach the rear plugs from underneath, by reaching up beside the exhaust pipe. You have the do it by feel. Good luck

Oct 15, 2010 | 2005 Pontiac Montana SV6

3 Answers

Changing the front brake pads on a 2006 Pontiac Montana SV6

no that is only the older rear calipers on gm and others. the fronts do not have that style caliper and sound like the calipers are frozen and may be way your changing the pads. try opening the bleeder screw and then compressing them if they go then you need need brake hoses and if not you need calipers. god luck man

Dec 13, 2009 | 2005 Pontiac Montana SV6

1 Answer

Pontiac brake rotors sv6 2005

the screw is just to keep them in place and most cars dont have them i would think there wouldn't be any problems

Jul 05, 2009 | 2005 Pontiac Montana SV6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides