Question about 1997 Oldsmobile Bravada

1 Answer

My back brake lights rare not working but the top brake light works i change the bulbs and also the brake switch what else could it be ???????

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 170 Answers

If its not a fuse, it should be the wiring harness, basically the connector that provides juice to the rear lights. see if you can find it inside the rear panels maybe ids corroded or just unplugged.

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights not working but running lights & turn signals work already changed brake switch


check all fuses using a test light or volt meter if they are all good test for voltage at brake light connection if you have voltage in and out of switch test for voltage at rear light sockets with someone holding foot on brakes if voltage is present replace bulb or socket if no voltage is present a wire between switch and socket is broke . but that is very rare.a fuse is usually the problem dont just visually inspect them

Jan 18, 2013 | 2002 Ford Explorer

1 Answer

I have no brake lights on my mini bulbs are good


Usually a problem with the turn signal switch.

Jul 05, 2012 | 2005 Mini Cooper

2 Answers

No brake lights on rear of truck. Turn signals work and brake light on top with cargo light works but not on rear of truck


Brake light on top works tells me the switch at the pedal is ok. Turn signals working tells me that the turn signal filaments have power.

I would try changing the bulbs and if that doesn't work have an electrical shop trace the wires and check for power on the brake light circuit in the back.

Jul 04, 2010 | 1996 Chevrolet K1500

2 Answers

95' Buick regal, 3rd brake light works, tail lights work, turn signals work, stoplight switch seems to work ie 3rd brake light working, fuse is ok, changed bulbs, but no rear brake lights.


If the third brake light works and the regular ones don't, it is most likely a bad turn signal (multifunction) switch. The switch is able to kill the brakes lights to run the turn signals, and in rare circumstances does this. I've seen it several times. It could also be wiring, especially near the turn signal switch, but it is usually the switch.

Nov 25, 2009 | 1995 Buick Regal

2 Answers

Brake lights not working on 2003 E 350


Have you checked the fuse for the brake lights and have you checked the brake light switch.
The brake light switch is directly above your foot when it is placed on the brake pedal.

Sep 07, 2009 | 2002 Ford E350

1 Answer

Brake lamps wont work when brake is applied.


CHECK FUSES.THE TOP BRAKE LIGHT WORKS ON A SEPERATE FUSE.

Sep 07, 2009 | 2003 Chevrolet TrailBlazer

3 Answers

Brake lights not working


Not even the third eye? then the fuse is blown or all the bulbs are out or the brake light switch on the break pedal is bad wire off or broken( it breaks right off the plug then crosses then blows the fuse as the loose broken wire hits the brake pedel arm. Test the break pedal switch first if the third eye doesesnt work either. no power with a test light the fuse is blown or the wire broke ( the wire goes straight to the switch from the fuse and doesnt go anywhere elese. the other wire if hot should light the lights. Most of these wont come out of park without this working as the wire also turns on the park release but some Fords the park release sticks released and Ford made em that way as they didnt like the brake to get out of park law. If the brake lights dont work maybe you ought not be able to get out of park anyway till its fixed. the switch is hot on both wires with the switch pused down and the lights dont still work go after the third eye first if the bulbs are bad change em before you do the rest of the work. on cars with yellow turn signals the brake lights all work on the same wire but red only use three wires, but you didnt say the turn signales didnt work if they work and they are red you r on the way to the turn signal switch as the brake switch powers the turn switch with power then it splites it fot the two lights and adifferent switch circuit for the front hooks them all together for hazard. yellow turns in the back or even separt bulbs can mean blown bulbs ther too its old enought for all the bulbs to fail and the runs still work.

Aug 14, 2009 | 1999 Ford Explorer

2 Answers

Bottom brake lights and hazard lights do not come on. All other lights work including top brake lights. Fuses and bulbs checked.


Check for power out of brake light switch by brake pedal. Of its faulty , the 3rd brake light will still work. Hope this helps

May 20, 2009 | 2000 GMC Yukon Denali

Not finding what you are looking for?
1997 Oldsmobile Bravada Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...