Question about 2005 Ford Escape

Open Question

How to Change Alternator on 2005 Ford Escape?

Posted by on

  • Anonymous Sep 03, 2010

    Why are you changing it? What tests were done on it? Voltage output,Amp output, Too much AC ripple, bad oscilloscope results, bearings failed?

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
polarcycle
  • 1392 Answers

SOURCE: 2005 ford escape assembly diagram for the front axle

If they are sealed bearings, you will need a press to get them out. If they are bolt in, just remove the brake pads/rotors, then the axle nut, then the bolts holding the wheel bearing in. Install in reverse order.

Posted on Mar 07, 2009

Ad
  • 1 Answer

SOURCE: 2005 escape auto transmission maintenance

I had the defective cooler replaced yesterday and the Ford service manager told me there is no pan or filter in the 2008 escape, only a screen.

Posted on Sep 02, 2009

ZJLimited
  • 17970 Answers

SOURCE: how do I change a 2005 mustang alternator? NOT gt

2005 Ford Mustang 4.0L SFI SOHC 6cyl
Ford Mustang 1999-2005
Alternator - Removal & Installation

3.8L And 4.0L Engines

  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the accessory drive belt.
  4. Disconnect the alternator electrical connectors.
  5. Remove the alternator shield (4.0L engine).
  6. Remove the alternator mounting bolts.
  7. Remove the alternator from the vehicle.
  8. Installation is the reverse of the removal procedure.
To install:
  1. Position the alternator onto engine. Tighten the lower bolt to 35 ft. lbs. (47 Nm) and the upper bolt to 18 ft. lbs. (25 Nm).
  2. Install the alternator shield (4.0L engine).
  3. Connect the alternator electrical connectors.
  4. Install the accessory drive belt.
  5. Connect the negative battery cable.

4.6L Engines (Non-Supercharged)
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the air intake scoop bracket, if equipped.
  4. Remove the accessory drive belt.
  5. Remove the upper alternator bracket.
  6. Disconnect the alternator electrical connectors.
  7. Remove the alternator bolts.
  8. Remove the alternator from the vehicle.
  9. Installation is the reverse of the removal procedure.
To install:
  1. Position the alternator onto engine. Tighten the mounting bolts to 18 ft. lbs. (25 Nm).
  2. Connect the alternator electrical connectors.
  3. Install the upper alternator bracket. Tighten the bolts to 89 inch lbs. (10 Nm).
  4. Install the accessory drive belt.
  5. Install the air intake scoop bracket, if equipped.
  6. Connect the negative battery cable.
4.6L Engines (Supercharged)
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the accessory drive belt.
  4. Raise the vehicle.
  5. Disconnect the alternator electrical connectors.
  6. Remove the alternator bolts.
  7. Remove the alternator from the vehicle.
  8. Installation is the reverse of the removal procedure.
To install:
  1. Position the alternator onto engine. Tighten the lower bolt to 18 ft. lbs. (25 Nm) and the upper bolt to 37 ft. lbs. (50 Nm).
  2. Connect the alternator electrical connectors.
  3. Lower the vehicle.
  4. Install the accessory drive belt.
  5. Connect the negative battery cable.
  6. Installation is the reverse of the removal procedure.

More details about this model in Autozone.com (free register).

I hope help you with this (remember rated this help). Good luck.

Posted on Sep 17, 2009

gladys_neal
  • 334 Answers

SOURCE: 2005 ford escape 3.0l AWD XLT - DRIVESHAFT CARRIER

if there is some one in your area that balances driveshafts they can change just the bearing for you

Posted on Nov 10, 2009

  • 1 Answer

SOURCE: How do you change a license plate light on a 2005

I just replaced one of the license plate lights on my '05. Gently push the housing toward the center of the car as you pry under the outside edge, and it will pop out. Remove the socket from the housing by twisting it 1/4 turn. The bulb is the push-in type commonly used for marker and dash lights. I always spray some Radio Shack electrical contact cleaner into the socket before inserting a new bulb - helps make a good contact and prevents corrosion. Hope this helps!

David

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What are the fuel problem with 05 ford escape. want crank,battery not charging


Hello,

If the battery does not charge - alternator (replace)

The battery starts the vehicle and the alternator charges the battery and runs the vehicle after the vehicle is running.

I hope this helps

Oct 28, 2017 | 2005 Ford Escape

1 Answer

How to replace 2006 ford escape left front axle shaft


How to Replace a CV Axle on a Ford Escape / Mazda ...

? 9:41
https://www.youtube.com/watch?v=_JxagNLBlQ4
Aug 29, 2013 - Uploaded by klowny1969
Axle nut should be torqued to spec..in the ford escape its around 205-220 lbs ft How To Change An Axle On A Front Wheel Drive Car ! SUBSCRIBE ! ... How to Replace a Front Axle Half Shaft - Duration: 14:37. ... Alternator replacement 2005 2006 Ford Escape 3.0L DOHC All Wheel Drive - Duration: 13:15.

Front axle replacement Ford Escape 2003 Right front CV ...

? 8:46
https://www.youtube.com/watch?v=JQK8SPj6Qsk
Mar 29, 2014 - Uploaded by Fixing cars and stuff
Front axle replacement Ford Escape 2003 Right front CV axle install remove replace This Channel provides ...

Feb 03, 2016 | Ford Cars & Trucks

1 Answer

How do i access alternator on 2005 ford escape


through the wheelwell and underneath

Apr 04, 2013 | 2005 Ford Escape

1 Answer

Can u answer r not how to get to the alternator


had to replace my alternator on my 2005 escape. they had to take off the rt front axle to get at it. lotsa labor.

Feb 16, 2013 | 2005 Ford Escape

1 Answer

Code battery pack on a ford escape 3.0 cid 2005year


THE ALTERNATOR YOU USE IS IT A NEW OR SECOND HAND.IF IT IS A SECOND HAND TEST IT. BATTERY IS IT GOOD ?

Sep 02, 2012 | 2005 Ford Escape

1 Answer

I have a 2005 ford escape my battery died twice i hade the alternator check.the say it ok.


It could be a corroded wire terminal. i think your alternator is controlled by the engine computer, so that circuit needs to be checked too.

Jul 28, 2011 | 2005 Ford Escape

1 Answer

I think it maybe my alternator any recalls


There are 2 recalls that have been issued on your model and year vehicle, none related to the alternator. Go to this site and review the recalled parts and make sure your vehicle has been repaired and is safe. Good luck!

http://www.ford-trucks.com/recalls/recall.php/m-FORD/y-2005/d-ESCAPE

Feb 04, 2011 | 2005 Ford Escape

1 Answer

Should a 2005 Ford Escape have an alternator problem? Just had to replace one. Is there any kind of recall?? I had Pontiacs for years and never had to have one replaced. PLEASE EXPLAIN the problem. ...


Well, it's not uncommon for a 5 year old car to have a bad alternator.

I looked at the recalls and there were none for the alternator for the 2005 Ford Escape.

It has more to do with miles traveled and quality and construction of the alternator, and general wear and tear issues, than whether it's a 2005 model year SUV that is relatively new, but still got a bad alternator over time.

Hopefully, you can get more than 4 or 5 years out of this alternator. Does your replacementalternator have a lifetime warranty on it?

Aug 14, 2010 | Ford Escape Cars & Trucks

1 Answer

How do you remove and replace the alternator on a 2005 ford escape 4 cylander


Loosen the belt by loosing a tensioner bolt on the alternator. Disconnect the battery and cables from the alternator. Replace with new alternator and hook up the power cables to it. Then reconnect the battery and you're done. Mike. Rate 100% please.

Sep 18, 2009 | 2005 Ford Escape

Not finding what you are looking for?
2005 Ford Escape Logo

Related Topics:

902 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...