Question about 1985 Dodge Ram 50

1 Answer

Must turn over for 10 minutes to get started - 1985 Dodge Ram 50

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 222 Answers

Well sounds like you have one hell of a good starter and charging system to do that. I'd look into fuel pressure, fuel pump, fuel line 1st. If that's ok I'd check the distributor. You might want to clean or replace the rotor if black or the entire thing if old.

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 oldsmobile alero wont start or the key wont turn over what do i do?


you need to turn the key to the on position for 10 minutes then off for 10
minutes and then on for 10 minutes (a total of 3 times) the will reprogram your key it should start after this

Jan 10, 2013 | 2001 Oldsmobile Alero

1 Answer

How to reprogram an ignion for a 1999 cavilier


to reset passlock system, The procedure is not to try to start the engine, but to leave ignition in ON position 10 minutes. Turn off and turn to ON for another 10 minutes, turn it off and turn to ON one more time for 10 more minutes.
This is a 30 minute procedure, not a 10 minute procedure. good-day !

Sep 21, 2011 | 1999 Chevrolet Cavalier

1 Answer

I lost all power in a 2005 Trailblazer. Called GM and they said to kick the key forward and wait 10 min, and this would reset it. It did but now the radio A/C door locks and windows don't work. What...


Do it three times in a row.

1. Perform a security system relearn.
2. Let the vehicle sit for more than 10 minutes with the key off.
3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
4. After 10 minutes, the security indicator will change state.
5. Turn the key off and wait 10 seconds.
6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
7. After the second 10 minute timer has expired, turn the key off for 10 seconds.
8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.
10. The security system will relearn on the 4th starting attempt and the engine should start and run.

Here is a link about the security problem

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Aug 12, 2011 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

How to rekey a pontiac sunfire 2004


Im assuming you are refering to the anti theft security key relearn process.

1. Perform a security system relearn.
2. Let the vehicle sit for more than 10 minutes with the key off.
3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
4. After 10 minutes, the security indicator will change state.
5. Turn the key off and wait 10 seconds.
6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
7. After the second 10 minute timer has expired, turn the key off for 10 seconds.
8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.
10. The security system will relearn on the 4th starting attempt and the engine should start and run.

If that doesnt work, look into this link http://vatspasslockpasskeysecurityhelp.yolasite.com/

Aug 07, 2011 | 2004 Pontiac Sunfire

1 Answer

Programing a key fob


1. Perform a security system relearn.
2. Let the vehicle sit for more than 10 minutes with the key off.
3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
4. After 10 minutes, the security indicator will change state.
5. Turn the key off and wait 10 seconds.
6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
7. After the second 10 minute timer has expired, turn the key off for 10 seconds.
8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.
10. The security system will relearn on the 4th starting attempt and the engine should start and run.
If this doesnt work, you may have a failure in your system. If the security light is on, and the reprogram doesnt work, you might want to look into bypassing that antitheft system.

http://vatspasslockpasskeysecurityhelp.yolasite.com/


tayjoejoe_30.jpg

Aug 06, 2011 | Oldsmobile Alero Cars & Trucks

1 Answer

How to reprogram key


1. Perform a security system relearn.

2. Let the vehicle sit for more than 10 minutes with the key off.

3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.

4. After 10 minutes, the security indicator will change state.

5. Turn the key off and wait 10 seconds.

6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.

7. After the second 10 minute timer has expired, turn the key off for 10 seconds.

8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.

9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.

10. The security system will relearn on the 4th starting attempt and the engine should start and run.

If this doesnt work, and you are having STARTING issues, go to this link.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jul 29, 2011 | 2005 Pontiac Grand Prix

2 Answers

Security light blinks when key is turned to on and will not start, also is the key supposed to be coded? 2003 saturn vue 2.2


Ok to learn the key you have to do what is call 10 minute learn , turn the key to start in attempt to start the car without turning the key off after you do this leave the key on for 10 minute until light goes out, After the security light goes out turn key off for a second or two and then try to start. If you have a new key you have to do a 30 minute learn you have to do the same thing as you did for the 10 minute learn but 3 time try and start without turning key off wait 10 minutes until security goes out then try and start again and leave key on, after you do this 3 time (30 minutes) the 3rd time is where you turn the key of for a second or two before starting.

May 25, 2011 | 2003 Saturn VUE

1 Answer

This morning when I attempted to start my 2006 Hummer H3, nothing happened. I thought I may have a dead battery but the lights and radio work fine. I then noticed the Passlock security lock light was on...


Hello:Try this procedure: turn key on, turn to start, let key come back to on wait ten minutes, turn key off wait 10 seconds turn key back on wait 10 minutes. turn key off wait 10 seconds turn key back on wait 10 minutes turn key off wait 10 seconds NOW try and start. In addition you might try tapping on switch assembly while trying to start. There is not any way to disable passlock. You might try having the engine control system codes read

Feb 01, 2011 | 2006 Hummer H3

1 Answer

I just put a new steering column in my 200 saturn sl2 because my ignition lock was messed up. Now when whe try to start the car, it will start up but immediately shut off and then the security light...


Hello: Will try to give you instructions: Attempt to start car, leave key on (security light flashing) let set for 10 minutes, After 10 minutes security light out. Turn key off for ten seconds, turn key on, let set for 10 minutes, turn key off for 10 seconds. turn key back on let set 10 minutes, turn key off for ten seconds, the engine should now start and stay running.

Jan 14, 2011 | Saturn SL2 Cars & Trucks

1 Answer

I change the fuel pump, and when i finish a security light appears on the dash and wont start


ok,you will need to hook up a battery charger to it.turn the key on and leave it on for 10 minutes,turn it off for no longer than a minute,turn it back on for 10 minutes,then turn it off for no longer than a minute,then turn it on for ten minutes then turn it off,then it should start.somehow you lost your pragram in the key.this will take 30 minutes or so,thats why you need the battery charger,dont try to start it between cycles or you will have to start over again

Jan 31, 2010 | 2000 GMC Denali

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...