Question about 1999 Dodge Durango

1 Answer

How do you put a water pump i a 1999 dodge durango 5.2 8cyc 4wd. if can step by step and a

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

First disconnectthe cable from negative terminal of the battery. drain the cooling system if the coolant is relatively new or in good condition, save it. remove the cooling fan and shroud. remove the drive belt and water pump pulley. loosen the clamps and detach the hoses from the water pump. if stuck try to twist to break seal. check hoses if bad replace. on v6 & v8 remove the water pump coolant return tube mounting bolt. Remove the bolts and detach the water pump from the engine. Note: the location of the various lengths and different types of bolts as you remove them. to ensure correct installation. on v8 models reach above the water pump with pilers to release the hose clamp on the bypass hose.clean the bolt & and the threaded hoses in the engine. compare the new pump with the old one make sure there identical. remove all traces of old gasket material from engine.

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New serpintine belt breaks on 1999 dodge durango


possibly broken water pump, then belt gets loose, hits the fan blade...

Sep 12, 2012 | 1999 Dodge Durango

1 Answer

1999 dodge durango. Changed belt. Fan loose. Put in Antifreeze and it came pouring out the engine behind the fan assembly


Your water pump is toast. Not hard to change if you are mechanically inclined. If you need help, let us know.

Jul 25, 2011 | 1999 Dodge Durango

1 Answer

1999 dodge durango 5.9 4wd need a diagram for the junction block under the hood


replacing a 5.2 in a 98 dodge darango with a 5.9. Are there any concerns

Jun 01, 2010 | 1999 Dodge Durango

3 Answers

How do you use 4WD on a 1999 dodge durango?


there are 2 systems.
one is a part time system only.the 4x4 locks and is for ice mud and snow.Driving full time will damage the transfer case.The other system is a full time system and the selector says 2wd,4wd part time ,4wd full time and 4 lo. if in full time,it can be driven all the time even on dry roads.The full time is really an all wheel drive system.
the 4low is a very low gear and the main shifter has to be put in neutral and then the transfer case put in 4 low.attempting to put it in 4 low while in "drive" will make a gear grinding noise.
getting out of 4 low is the opposite.shifter to neutral and then put it in 2wd and then in drive.The newer durango has an electronic transfer case with a dial on the dash.The 2002 was available with 2wd,4wd,awd and 4 lo on a switch.The 1999 has the lever on the floor .

Feb 12, 2010 | 1999 Dodge Durango

1 Answer

1999 durango 5.2 4wd -transmission does nothing


from what i gather the trans pump is out

Feb 12, 2010 | 1999 Dodge Durango

1 Answer

I have a 1999 Durango w/o owners manual, do I need


You can shift into and out of 4 high at low speeds, to get into and out of 4wd low you will have to stop and go into park.

Jan 11, 2010 | 1999 Dodge Durango

1 Answer

How do i change the water pump


you need to remove the serpentine belt, then remvoe the clutch fan assembly, then remove the pulley from the water pump, then you will see the retaining bolts, just remove them and its out, repeat the steps to install the new one

Nov 29, 2009 | 1999 Dodge Durango

2 Answers

Fan loose , anti-freeze dripping


there is a weap hole in the bottom of the pump if it is leaking from that it is the pump they will make noise when they go out also

Apr 24, 2009 | 1999 Dodge Durango

1 Answer

1999 Dodge durango heating sucks and leaking coolant now


Smelling antifreeze indicates to me you have a crack in the heater core. Most are made of plastic. This shows yours is metal. I guessed on 2WD or 4WD and size of engine.

http://www.autozone.com/cooling-heating-and-climate-control/heater-core/spectra-premium-heater-core/979573_717836_0

Unlikely to be frost plugs unless you ran the system without antifreeze and the block partially froze. When they freeze fully, the plug pops and out and you lose all the coolant when it thaws.

Finally, this is a common problem with the Durango! As my learned colleague says, replace the thermostat as it needs to be fully open to let water flow well to the heater core.

1999 Durango Google Search

Mar 28, 2017 | 2001 Dodge Durango

Not finding what you are looking for?
1999 Dodge Durango Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...