Question about 2001 Saab 9-3

Open Question

Scan tool reading p1110 & p1625 - 2001 Saab 9-3

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting a P1625 fault reading .What does this mean, and how can it be fixed


On a SAAB it is failure to communicate betwee ECU and ABS. Without the diadnostic equipment all you do is reseat the coonectors and make sure the boxes are grounded.

Dec 05, 2015 | Cars & Trucks

3 Answers

What is a scan tool


A scan tool allows for the OBD II (On Board Diagnostics) codes to be read from the engine computer in a car. These are common electronic diagnostics tools used by automotive technicians. They are usually used when a check engine light comes on to determine the error codes associated with the check engine light.


They almost always connect via a standard plug on the divers side under the dash.


Most automotive parts supplier will check a car with complementary service to determine the codes stored in a customers automobile.

Nov 21, 2015 | Cars & Trucks

1 Answer

I have a saab 93 2002 with engine codes,p1110,p1312 and p1334 showing can anyone please tell me what they mean!


CODES P1312 AND P1334 These codes are related to the DI Module. Check the DI Module. Replace it if needed and clear the codes.

CODES P1110 Code P1110 is related to the Turbo Bypass Valve, check the vacuum lines at the Bypass Valve and especially at a vacuum sensor mounted on the firewall driver's side. The lines become loose with age and will pop off or can become disconnected when someone is reaching behind the for other reasons.

Jun 03, 2015 | 2005 Saab 9-3 2.0

1 Answer

RAV 4 2004 cruise control not working- checked fuses & brake & clutch switch operation- ok


my guess, NO SCAN TOOL?

you can't fix car with out, a (drum roll) SCAN TOOL

the modern car also cuts cruise for many reasons.

(death) reason and #2, billion dollar class action suits. (read news?)

so they now cut the cruise for lots of engine failures and trans.

no scanning the PCM now, you lose.



2004 RAV 4 no engine stated.

if it has TBW (throttle by wire ) that too, cuts CRUISE big time if iffy

yes,DTCs for TBW or limphome of any kind !!!



what engine, we cant fix engine issues, with out that.

only about 10% here post that. so most answer are wrong.

imagine with body shells missing , see that < what is it,its a drive train. what is yours? engine and trans. what?



causes?

Check engine light on runnning

Scan tool shows, DTC errors. BINGO.

scan tool show stuck on limphome?

Throttle or idle errors of any kind?

there is no cruise module on ours USA>

The PCM mimics that in pure software (fact)

so if the PCM is unhappy, it does in fact cut cruise.



no scan tool makes all this IMPOSSIBLE on all newer cars !!!!



see PCM see throttle motor, bingo its cruise TOO.


25411189-zbln44ct1tdwqhstyscwyswj-2-0.jpg

Feb 11, 2015 | 2004 Toyota RAV4

1 Answer

Have 2003 suzuki aerio won't idle after temp light goes out


the engine can not idle right for vast reasons.
wont idle, does that mean
1: stalls.?
2: or wont regulate, hot.
3: or both.
So , no DTCs, no cell lamp glowing , running?
you replaced some very expensive parts, by guessing?
checking fuel pressure costs $20 for the tool.
do you have a $50 scan tool? if yes, you can scan all sensors.
and see if the sensors all look good. do they?
did you buy a used maf ,or new suzuki maf $$$ or the china clone.
most of the clones are no good.
best is , used, and from Cardone.(rebuilt by pros)
the China clones , read wrong, the ECU does not know its wrong
because it is not stuck at 0 or 5v. so assumes its right and is wrong.
with a scan tool you can see the MAF read wrong. do you?
what i do is plot TPS angle, RPM and MAF output and log that.
then at home read the values.

the #1 reason for stalls is leaking EGR. ever clean and service it?

Apr 10, 2013 | 2003 Suzuki Aerio

1 Answer

I have a message (air condition no connected)in my car LEXUS VG 470 v8 model 2006 and i can't read the trouble code with scan tool please help


You need a professional scan tool to read
body codes & the correct software
for asian vehicles, as well as enhanced data

Mar 08, 2013 | Cars & Trucks

1 Answer

There is a diagnostic code P1625 for 2001 Saab 9-3 convertible with 88,115 miles. Is this an expensive fix?


P1625 means that the engine computer has lost communication with the antilock brake and/or traction control computer for at least 3 seconds. How expensive this is depends on why it has lost communication, It could be something as simple as a loose connection at a wiring connector or a broken or shorted wire in the PCI bus circuit inside the wiring harness. (Which may require considerable diagnostic time to find) or it could be an internally failed ABS module.

Recommendation:
If you are NOT experiencing ANY of the symptoms below, I would simply clear the code and move on.... It is an intermittent fault that you will most likely not find very easily. If you ARE experiencing ONE OR MORE of these symptoms, then the problem needs to be diagnosed by checking the ABS module's ability to communicate with a scanner while testing the PCI Bus circuits.

Other possible symptoms of Diagnostic Trouble Code (DTC) P1625
• Speedometer malfunctioning
• Traction Control malfunctioning
• Antilock Brake System malfunctioning or ABS light on
• Cruise Control malfunctioning

Mar 08, 2011 | 2001 Saab 9-3

1 Answer

Setting transmission code p1625


Not exactly sure what you are asking, but the code P1625 on the Cadillac Catera relates to the following issue:

Code P1625 - B+ Supply To VCRM Fan Circuit Malfunction.

Hope that helps!

Feb 14, 2011 | 1998 Cadillac Catera

1 Answer

1996 yukon Question: I replaced all 4 O2 sensors on my 1996 GMC 5.7L Yukon. My scan tool shows "Sensors not ready to communicate or available" for #2 & #4 ( downstream. #1 & #3 are fine and...


If your scan tool shows - " READINESS MONITORS ok- You are all set. Just replaced all 4 O2 sensors and CATS on a 1996 Yukon & I have an Autoxray EZ5000 scanner which gave me the same readings but the truck passed emissions here in mass.

May 14, 2009 | 2001 Toyota Corolla

Not finding what you are looking for?

Open Questions:

See all 2001 Saab 9-3 Questions

2001 Saab 9-3 Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...